Ballycatter.in Industrial Marketplace - Find Equipment and Service Providers
    ×
  • All Categories
  • Construction
  • Marine
  • Subsea
  • Process Equipment
  • Transport
  • Workover
  • Completions
  • Drilling
  • Customer Service
  • Partners
837 results of over 10,000 items

Company Type

Availability

Quality Assurance

Condition

Transaction Type

320 GC Hydraulic Excavator

320 GC Hydraulic Excavator

BOOM AND STICKS 5.7 m (18'8") Reach boom CAB Rollover protective structure (ROPS) Mechanical-suspension seat High-resolution 203 mm (8 inch) LCD touchscreen monitor CAT TECHNOLOGY Cat Product Link™ Remote Flash Remote Troubleshoot Auto hammer stop ELECTRICAL Two 1,000 CCA maintenance-free batteries Programmable time-delay LED working lights LED chassis light, left-hand/right-hand boom lights, cab lights ENGINE Cat C4.4 single turbo engine Two selectable power modes Auto engine speed control Auto engine idle shutdown 52° C (125° F) high-ambient cooling capacity -32° C (-25° F) cold start capability Double element air filter with integrated pre-cleaner Reversible electric cooling fans HYDRAULIC SYSTEM Boom and stick regeneration circuits Boom and stick lowering check valves Auto warm up Auto two-speed travel Boom and stick drift reduction valve Slider joysticks Tool control (two pumps, one/two way high-pressure flow) SAFETY AND SECURITY Rearview and right-hand-sideview cameras Ground-level engine shutoff switch Right-hand handrail and hand hold Signaling/warning horn SERVICE AND MAINTENANCE Sampling ports for Scheduled Oil Sampling (S·O·S) Ground-level and platform-level engine oil dipsticks UNDERCARRIAGE AND STRUCTURES Tie-down points on base frame 3700 kg (8,160 lb) counterweight (Turkey only) 4200 kg (9,300 lb) counterweight

Buy

Currently in Use

Distributor

New

ISO

Sea Freight


3-1/2 inch K Storm Choke

K Ambient Valve

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


Safety Valve (Subsurface) 3.63 inch WI

Injection Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

New

New

API

Sea Freight


TIG AC/DC 281 Pulse Welding Machine

AC and DC TIG welder

Introducing the TIG AC/DC 281 Pulse: Precision Welding at its Finest When it comes to precision welding, the TIG AC/DC 281 Pulse from Canaweld stands head and shoulders above the rest. As an industrial, heavy-duty, and powerful welding machine, it has been designed to deliver exceptional results, making it the ideal choice for all your welding needs. Precision Pulse Welding - Unmatched Quality The TIG AC/DC 281 Pulse is equipped with professional pulse features and an HF start that allows welders to achieve high-quality TIG welds even on the thinnest materials without any distortion. Its inverter-based arc welding power source with advanced waveforms and pulse controls sets a new standard for welding excellence in industrial workshops. Advanced 5-inch Color Display - Simplified Control Navigating your welding experience is effortless with the TIG AC/DC 281 Pulse's 5-inch LCD screen. Whether you're an experienced welder or a novice, this display empowers you to quickly and accurately set and select the right parameters, reducing setup time and increasing your actual welding productivity. All the features can be easily customized and saved in the available memory settings, ensuring consistency and efficiency in every project. Powerful Performance and Versatility With the TIG AC/DC 281 Pulse, you can tackle a wide range of welding tasks with ease: • Capability to TIG weld aluminum and steel workpieces up to 3/8 inch (9.5 mm) in thickness, delivering a maximum output of 280 amps for demanding applications. • AC waveforms, including progressive square wave, sine wave, and triangular wave, provide precise control for different materials and welding needs. • Up to 10 memory locations to store your most important weld parameters, giving you quick access to frequently used settings. • Adjustable soft welding start and powerful start options, ensuring perfect arc initiation for both thin and thicker materials. • Adjustable balance settings for aluminum welding, allowing you to control cleaning and penetration sequences effectively. Built Tough for Challenging Environments The TIG AC/DC 281 Pulse is engineered to withstand the toughest conditions, thanks to its rigorous testing in (104°F/40°C). Its durable and efficient design ensures you can rely on it for flawless performance, no matter where your welding projects take you. Efficiency Meets Innovation The TIG AC/DC 281 Pulse offers innovation at its core: • High-frequency (HF) start for perfect arc initiation and stability, minimizing downtime and maximizing productivity. • Digital control of all welding parameters, giving you complete control over the welding process. • Amperage control accessible by foot pedal, providing precise control over welding intensity. • Pulse TIG welding for better arc control and minimized workpiece distortion, perfect for achieving immaculate welds. • The ability to use up to 165 feet (50 meters) leads without any power loss, ensuring flexibility and mobility in your workspace. • Digital adjustment of pre-flow, initial amperage, welding amperage, initial slope, pulse parameters, final slope, and post-flow, enhancing precision and efficiency. Unwavering Commitment to Quality With Canaweld's comprehensive 3-year warranty, you can weld with peace of mind, knowing that your TIG AC/DC 281 Pulse is backed by our commitment to quality and customer satisfaction. Innovative Wind Tunnel for Cooling Efficiency The TIG AC/DC 281 Pulse incorporates an innovative wind tunnel for cooling efficiency, ensuring consistent performance even during long welding sessions. Experience Precision Welding with Canaweld Take your welding to the next level with the TIG AC/DC 281 Pulse from Canaweld. Experience precision welding at its finest and elevate your projects with unparalleled performance and control. Choose Canaweld and let the TIG AC/DC 281 Pulse redefine your welding experience. Achieve perfection with Canaweld!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Partnered with Sentinel One

Cybersecurity

ALCiT in Mississauga

More information

Elevate Your Security with ALCiT's SentinelOne Partnership In the realm of cybersecurity, the fight against threats is unceasing. ALCiT stands shoulder to shoulder with SentinelOne, a pioneering force in endpoint security. With accolades from Forbes and an AI-powered arsenal, SentinelOne's mission is unwavering: to safeguard you against every attack, every second, of every day. SentinelOne: A Beacon of Innovation Forbes' recognition as one of the most promising AI companies in the United States only scratches the surface of SentinelOne's brilliance. Armed with AI-powered technology, they epitomize the art of cybersecurity. ALCiT is honored to join forces with SentinelOne, embarking on a journey to fortify your digital realm. Defend Against Tomorrow's Threats Today SentinelOne isn't just a security solution; it's a fortress against a plethora of threats. From exploiting documents to live credentials, their fully automated security promises to keep your data safe and shield your company from the headlines of cyberattacks. The SentinelOne Advantage: Unleashed Fully Automated Security: Your defense isn't just secure; it's autonomous. SentinelOne's cutting-edge technology takes the lead, ensuring your protection is thorough and seamless. Innovation at the Core: Threats evolve, but so does SentinelOne. With innovation as their backbone, their solutions are tailor-made to combat the threats of tomorrow. Uninterrupted Protection: Day or night, SentinelOne stands guard. With continuous 24/7 threat defense, your security remains uncompromised. Your Defense Starts Here SentinelOne's promise isn't just words; it's action. ALCiT invites you to experience the prowess of SentinelOne firsthand. Start your trial today, and immerse yourself in the unparalleled security that SentinelOne provides. Shape a Secure Future Today ALCiT's partnership with SentinelOne isn't just a collaboration; it's a commitment to your security.

Service

Made to Order

Service

New

ISO


API-611 Steam Turbine

Single Stage Turbine

Elevate Your Operations with Kessels API-611 Compliant Steam Turbine: Where Precision Meets Excellence In the demanding realm of the oil and gas industry, precision, reliability, and adherence to standards are paramount. Kessels Steam Turbines takes pride in being a premier supplier of Steam Turbines that not only comply with but exceed the rigorous API-611 standards for general-purpose steam turbines. Setting New Standards in Steam Turbine Excellence Kessels Steam Turbines are at the forefront of driving pumps, fans, and compressors in Oil Refineries across the Middle East, India, and South East Asia. These turbines stand as testaments to our unwavering commitment to adhering to stringent design engineering practices set by oil giants and discerning end customers alike. Distinguishing Features of Kessels API-611 Single Stage Steam Turbines: Meets & Exceeds API-611 Standard: Our turbines not only meet but go beyond the API-611 standard, ensuring top-notch performance and reliability. Direct Drive Oil Relay Governors: Equipped with provisions for Direct Drive Oil relay constant speed governors conforming to NEMA class 'A' & NEMA class 'D'. Over Speed Mechanical Trip: Safety is paramount, and our turbines come with an over-speed mechanical trip with safety shut-off as standard. Versatile Gland Sealing: Gland sealing is achieved through carbon rings (up to six, removable), labyrinths, or mechanical steam seals. We offer the flexibility of choosing any combination of these three options. Impulse-Type Wheels: Provision for Single disc single-row, and Single disc two-row Curtis impulse-type wheels made of forged steel. Built-in Steam Strainer: As a standard feature, our turbines include a built-in steam strainer that is removable for your convenience. Versatile Support: Our turbines can be centerline or foot-mounted, offering flexibility in installation. Solenoid Trips: Provision for solenoid trips for remote shutdowns comes as standard, ensuring safety and control. Suitable for High Pressures: Built to handle high inlet and exhaust steam pressures, our turbines are robust and reliable. Horizontal and Vertical Orientation: Choose between horizontal and vertical shaft orientation to suit your specific needs. These features are a testament to our unwavering commitment to ensuring that customers can operate Kessels API-611 compliant Steam Turbines with complete peace of mind for their mechanical driving needs. Choose Kessels for Unparalleled Excellence Choosing Kessels Steam Turbines is a choice for excellence, precision, and reliability. Our API-611 Compliant Steam Turbines not only meet industry standards but surpass them, ensuring the highest levels of performance and safety for your operations. Empower Your Operations with Kessels In the competitive landscape of the oil and gas industry, precision and reliability are non-negotiable. Elevate your operations with the Kessels API-611 Compliant Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


External Slip type Connector for Coiled Tubing

ESC Coiled Tubing Tool

Introducing the Innovative ESC (External Slip Type Connector) by Marlin Oil Tools: Your Solution for Reliable Coiled Tubing Connections in the Oil and Gas Industry Marlin Oil Tools is at the forefront of delivering cutting-edge solutions tailored for the dynamic needs of the oil and gas sector. Our latest innovation, the ESC (External Slip Type Connector), is designed to revolutionize well intervention operations by providing a secure and efficient method to connect the smooth lower end of coiled tubing (CT) to any downhole tool. Here’s why the ESC stands as a pivotal advancement in coiled tubing technology: Key Features of the ESC (External Slip Type Connector): Innovative Connection Design: The ESC boasts an internal collet mechanism with inward-pointing teeth, ensuring a tight grip on the smooth outer wall of the CT. This design guarantees a secure connection, vital for the successful execution of well intervention jobs. Enhanced Sealing Capabilities: Equipped with two O-rings made from the highly durable FKM 90 material, the ESC offers exceptional sealing, isolating the internal space of the connector from the annulus. This feature is crucial for maintaining the integrity of well operations and preventing fluid leakage. Robust and Reliable: The use of a trapezoidal thread in conjunction with high-quality metals provides a connection that is not only reliable but also capable of withstanding the rigorous demands of downhole activities. The ESC is built to ensure the safety and efficiency of well work. Versatile Tool Connection: The lower housing of the ESC features a standard working taper thread, making it compatible with a wide range of downhole tools. This versatility allows for seamless make-up and enhances the tool's utility across various well intervention scenarios. Marlin Oil Tools presents the ESC (External Slip Type Connector), an essential coiled tubing tool for oil and gas well intervention. Designed to securely link the smooth lower end of CT to threaded downhole tools, the ESC is engineered for reliability and efficiency. Featuring an internal collet with inward-pointing teeth for a firm grip, and dual O-rings made from FKM 90 for superior sealing, this connector ensures operational integrity. With its trapezoidal thread and high-quality metal construction, the ESC stands as a beacon of durability in harsh downhole environments. Its standard working taper thread accommodates various downhole tools, making it a versatile addition to your well intervention arsenal. Why Choose the ESC from Marlin Oil Tools? Security and Efficiency: The ESC’s innovative design ensures a secure connection between coiled tubing and downhole tools, optimizing well intervention operations. Superior Sealing: With its advanced sealing capabilities, the ESC prevents fluid leakage, protecting the well's integrity. Durability: Built with high-quality materials and a robust thread design, the ESC is designed to endure the toughest downhole conditions. Versatility: Its compatibility with a broad range of downhole tools makes it a flexible solution for various well intervention needs. Elevate your well intervention operations with the ESC (External Slip Type Connector) from Marlin Oil Tools. Contact us today to discover how our solutions can enhance your efficiency and operational success in the oil and gas industry.

Buy

Made to Order

Manufacturer

New

API

Land Freight


MS-152 Multistage Steam Turbine

Back Pressure Turbine

Introducing the Kessels MS-152 Multistage Steam Turbine: Unleash Unprecedented Power and Efficiency In the fast-paced world of the oil and gas industry, where precision, performance, and reliability are paramount, Kessels Steam Turbines proudly presents the MS-152 Multistage Steam Turbine. This engineering marvel is poised to redefine excellence in steam turbine technology, delivering unmatched power and efficiency. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and the MS-152 takes them to an entirely new level. Available in both single-stage and multi-stage options, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency Beyond Imagination At the heart of the MS-152 Multistage Steam Turbine is the essence of back pressure turbines – the straight-back pressure design. This innovative engineering ensures the seamless harnessing of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Limits Our MS-152 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-152 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-152 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-152 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Aerial lifts Leasing

Leasing Aerial Lift Construction Equipment with CWB National Leasing Supercharge Your Business with Smart Equipment Leasing If you're a business owner looking to acquire an Aerial Lift for your construction projects, consider leasing with Canadian Western Bank (CWB) National Leasing. This strategic move can significantly boost your business's capabilities while ensuring financial flexibility. Here's how CWB National Leasing makes it a smart choice: 1. Fast Equipment Acquisition CWB National Leasing promises a swift leasing process. Once your application is approved, typically within 48 hours, the payment is promptly processed to your equipment dealer. This speed ensures minimal downtime, allowing you to receive and start using your Aerial Lift without delay. 2. Enhanced Buying Power Leasing allows you to preserve capital while still acquiring top-of-the-line equipment. You can opt for additional features or accessories with minimal impact on your payments, maximizing your investment and operational efficiency. 3. Cash Flow Management With small, manageable payments spread over the lease term, your Aerial Lift begins to contribute to your revenue even as you pay for it. This structure helps maintain a healthy balance between expenses and income. 4. Flexible Payment Options CWB National Leasing offers payment structures that can be tailored to your business's revenue patterns, including seasonal, semi-annual, or annual options. This flexibility is particularly beneficial for businesses with variable income streams. 5. Tax Advantages Leasing can offer tax benefits by allowing you to expense lease payments rather than capitalizing the equipment cost. It's advisable to consult with your tax advisor to understand how leasing can improve your business's tax position. 6. Custom Payment Structures Every business is unique, and CWB National Leasing understands this. Leases are structured to align with your specific cash flow, ensuring that the payment plan suits your business model. 7. Flexible Buyout Options At the end of your lease, CWB National Leasing offers various buyout options, from as low as $1 to 50% of the equipment cost. This flexibility means that you can eventually own your Aerial Lift outright. 8. Fair Market Value and Step-Up/Down Options You can choose to defer a portion of the equipment cost to the end of the lease, with options to either purchase at fair market value or upgrade to newer equipment. The step-up or step-down payment options allow adjustments based on your business's evolving cash flow needs. 9. Tailored for Seasonal Businesses For businesses with seasonal revenue, like farms or golf courses, CWB National Leasing offers payment schedules that align with your specific income cycle, such as a six-month-on, six-month-off plan. Conclusion Leasing an Aerial Lift with CWB National Leasing is not just about acquiring equipment; it's about empowering your business with the right tools while maintaining financial agility and stability. By choosing to lease, you invest in your business's future, ensuring that you have the necessary equipment to grow and succeed, all while managing your finances effectively.

Service

In Stock

Service

New

ISO


Indoor forklifts Leasing

Elevate Your Warehouse Operations with Indoor Forklift Leasing from CWB National Leasing Enhancing Efficiency and Productivity in Material Handling with Flexible Equipment Solutions For businesses operating in warehousing, retail, manufacturing, or any sector that involves indoor material handling, indoor forklifts are crucial for efficiency and productivity. Leasing indoor forklifts through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially prudent solution for businesses looking to enhance their operational capabilities. Here’s how leasing indoor forklifts can benefit your business: 1. Rapid Access to High-Quality Equipment CWB National Leasing understands the critical need for efficient material handling in your operations. They offer a fast leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround ensures that your indoor forklifts can be delivered and operational quickly, enhancing your warehouse or manufacturing floor efficiency without delay. 2. Increased Financial Flexibility Leasing indoor forklifts with CWB National Leasing increases your buying power. Opting for periodic payments over a large upfront purchase frees up capital for other important business investments. Furthermore, the flexibility to add extra features or accessories to your forklifts for a small payment increase allows for customization to meet your specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your indoor forklifts start contributing to your business’s revenue while they're still being paid off. This approach helps maintain a healthy balance between expenses and income, which is crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is especially beneficial for businesses with seasonal fluctuations in income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing indoor forklifts can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can positively impact your business’s tax position.

Service

In Stock

Service

New

ISO


Magna Range Bridge Plug

Bridge Plug, Magna Range

Introducing the Magna Range Bridge Plug from ID OilTools – the ultimate solution to passing restrictions and securely setting in larger tubing or casing. Our plug has been specially designed to handle differential pressures of up to 10,000psi at 350°F, making it the perfect choice for your downhole operations. Due to the extended setting range this plug has no pressure rating and as such the differential pressures are not guaranteed, even though the plug has passed several tests in these conditions. What sets our plug apart is its extended setting range, which allows it to pass through restricted I.D. tubing, saving you valuable time and money. With case-hardened slips above and below a three-piece nitrile rubber pack-off system, our plug is designed to maintain a constant sealing pressure. The slips are specially heat-treated to ensure a secure anchoring even in P-110 casing, with a hard outer layer for gripping and a soft inner layer for easier milling. To ensure centered setting of the small diameter plug in large I.D. pipe, our Magna Range Plug features ribbed cones that direct the slips to evenly spaced positions against the pipe. And should it be necessary to remove the plug after setting, a milling process is recommended as the plug is constructed of mild steel and is not considered drillable. Don't compromise on quality and reliability when it comes to your downhole operations. Choose the Magna Range Bridge Plug from ID OilTools, and experience the ultimate in performance and efficiency.

Buy

In Stock

Product

New

API

Sea Freight


Lock Mandrels for Landing Nipples

Downhole Tools

Enhancing Downhole Operations with HOCA Oil Tools' Lock Mandrels for Landing Nipples In the intricate landscape of oilfield operations, achieving peak efficiency and maintaining well integrity are of utmost importance. HOCA Oil Tools, a leader in downhole slick line tools, introduces its Lock Mandrels for Landing Nipples, designed to meet these challenges head-on. These Lock Mandrels are crafted for precision, reliability, and durability, ensuring they meet the diverse needs of modern downhole activities. HOCA's Lock Mandrels for Landing Nipples: Tailored for Excellence Our Lock Mandrels are engineered to be set into pre-positioned landing nipples within the wellbore, providing a secure and reliable platform for the deployment of various downhole tools and instruments. Available in multiple types such as 'ROTR', 'ROTRN', 'ROTX', and 'ROTXN', our Lock Mandrels cater to a wide range of downhole conditions and operational requirements. They can be selected based on the specific flow control accessory attached, making them either Selective or No-Go types to suit different operational strategies. Experience the HOCA Oil Tools Difference By integrating HOCA Oil Tools’ Lock Mandrels into your downhole toolkit, you're choosing a product backed by our commitment to quality, innovation, and customer service. These mandrels are not just tools but solutions designed to enhance the efficiency and safety of your downhole operations. Our Lock Mandrels for Landing Nipples represent the intersection of innovation and practicality, providing the reliability and performance essential for today's oilfield challenges. Choose HOCA Oil Tools for your downhole needs and experience the difference that quality and expertise can make in your operations. Embrace the future of downhole operations with HOCA Oil Tools, where technology meets tradition to drive success in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Fiber Optic Mechanical Connectors

Navigating Optimal Connectivity with Nulux’s Fiber Optic Mechanical Connectors The Oil and Gas industry is no stranger to the integral role that secure, precise, and reliable connectivity plays in ensuring the smooth execution of its multifaceted operations. Amidst the sprawling expanse of pipes, rigs, and refineries lies a nexus of data, flowing incessantly, safeguarding operational integrity, and facilitating momentous decisions. In the paradigm of fostering such impeccable connectivity, Nulux Network Solutions introduces its exemplary service of deploying Fiber Optic Mechanical Connectors. Connecting More Than Just Fibers A fiber optic connector, though small in stature, plays a monumental role in ensuring that the lifeblood of your operations – your data – traverses through the network with utmost precision and minimal loss. Positioned meticulously at the end of a line, a fiber optic connector becomes the gateway through which connectivity to network devices or other fiber connectors in a patch panel is realized. Mechanical fiber connectors stand as sentinels, guarding the alignment of the cores of fibers, ensuring that the passage of light – and thus your data – is uninterrupted and lossless. The efficacy of these connectors is such that, when adeptly installed, they concede incredibly minimal light due to reflection or misalignment of the fibers. A Panorama of Possibilities with Mechanical Connectors Navigating through the approximately 100 different types of fiber optic connectors that have graced the market, Nulux remains undeterred and proficient in ensuring the selection and installation of the most apt connectors to meet your specific operational needs. Why Nulux’s Fiber Optic Mechanical Connectors? Spectrum-Wide Expertise: Offering products, solutions, and services that span across the entire energy value chain, Nulux’s offerings are not merely solutions but a steadfast commitment to ensuring your operations are perpetually connected and sustainable. Tailored Connectivity Solutions: Every operation in the oil and gas sector is uniquely nuanced. Nulux prides itself on delivering custom, tailored solutions, ensuring that your fiber optic connectors are not just installed but are perfectly aligned with your operational needs. Navigating Towards Sustainability: Our engagement with our customers extends beyond providing solutions. We stand alongside you, steering towards a more sustainable future, ensuring that every connector, every fiber, and every byte of data propels us towards a future that’s not just connected but also environmentally conscious. Lighting the Pathway of Data: Mechanical connectors from Nulux assure that the luminal path your data treads is secure, reliable, and optimal, ensuring that every bit of information reaches its destination as intended. Your Data’s Journey, Secured with Nulux In the nexus of your operations, where data flows with the same criticality as the oil traversing through your pipelines, Nulux Network Solutions stands as a guardian, ensuring that every byte of data reaches its destination securely, reliably, and optimally. Explore with Nulux, the realms of impeccable connectivity, safeguarding your operations with our Fiber Optic Mechanical Connectors, and let’s forge ahead, crafting a future where every connection propels us towards sustainability and operational excellence. Empower your network, ensure your connectivity, and enlighten your future with Nulux.

Service

In Stock

Service

New

ISO


Public Sector Verticals

Cybersecurity

ALCiT in Mississauga

More information

Elevate Public Sector Operations with ALCiT's Dedicated Solutions In the world of the public sector, the demands are constant – achieving more with less while navigating an ever-expanding sea of complexity. As challenges evolve, cybersecurity remains a paramount concern. ALCiT understands the intricate dynamics you face, and we're here to provide solutions that not only work but excel in the unique landscape of the public sector. Security: Your Ultimate Priority, Our Expertise Cybersecurity isn't just a checkbox; it's a commitment. In the public sector, where the stakes are high and the responsibilities are monumental, security can't be compromised. ALCiT is your dedicated partner, ensuring that every solution we provide is fortified with security measures that align with the gravity of your mission. A Portfolio Tailored to Excellence ALCiT understands that one-size-fits-all solutions won't cut it. That's why we've curated a portfolio of solutions, each adaptable to your unique needs. Our solutions, rooted in enterprise-grade tools, are pre-configured for optimal performance, delivering maximum value in record time. Whether deployed individually or as an integrated suite, we ensure your operations run seamlessly. Public Sector Solutions That Excel Security Operation Center (SOC) as a Service: Trust is earned through vigilance. Our 24/7 SOC monitoring offers round-the-clock surveillance, providing real-time threat detection and response. In just weeks, your security operations will be elevated to new heights. Network Access Control (NAC): Control isn't a luxury; it's a necessity. ALCiT's NAC empowers you to regulate network access, ensuring only authorized devices enter your domain, bolstering security and control. Network Refresh: Simplify your network management and enhance security posture with our network refresh solutions. Choose between a Service-based approach or a purchase model – either way, we ensure your network is optimized for success. Secure Today, Empower Tomorrow ALCiT's commitment to the public sector goes beyond services; it's a partnership built on trust and excellence. Let us empower your operations, enable your teams, and ensure your data remains fortified against the evolving challenges of the digital realm. Elevate public sector operations with ALCiT's dedicated solutions.

Service

Made to Order

Service

New

ISO

Digital


Demolition equipment Leasing

Revolutionize Your Demolition Projects with Equipment Leasing from CWB National Leasing Unleash the Power of Flexibility in Your Demolition Business In the demolition industry, having the right equipment is crucial for efficiency and success. Leasing your demolition equipment through Canadian Western Bank (CWB) National Leasing offers a smart solution that aligns with your business goals and financial strategy. Here's how leasing demolition equipment can propel your business forward: 1. Quick Access to Equipment CWB National Leasing values your time. They ensure a rapid review of your application, often making a decision within 48 hours. This means you can have your demolition equipment delivered swiftly after approval, minimizing downtime and accelerating project commencement. 2. Increased Financial Leverage Leasing with CWB National Leasing enhances your buying power. It allows you to acquire the necessary equipment through manageable periodic payments, rather than a substantial upfront cost. This approach frees up capital for other investments and enables you to add extra features or accessories to your equipment with minimal additional expense. 3. Control Over Cash Flow With smaller, spread-out lease payments, your demolition equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a healthy balance between your expenses and income, crucial for business stability and growth. 4. Adaptable Payment Plans CWB National Leasing offers flexible payment options tailored to your business’s revenue cycle, including seasonal, semi-annual, or annual structures. This flexibility is particularly beneficial for businesses with fluctuating income. 5. Potential Tax Benefits Leasing can offer tax advantages by enabling you to expense lease payments instead of capitalizing the equipment cost. Always consult with a tax advisor to explore how leasing can optimize your business’s tax position. 6. Customized Payment Structures CWB National Leasing understands that no two businesses are the same. They offer customized leases that align with your specific cash flow, ensuring the terms fit your unique business model. 7. Diverse Buyout Options A variety of buyout options are available at the end of your lease, ranging from a nominal amount to up to 50% of the total equipment cost. This flexibility allows for potential ownership of your demolition equipment. 8. Fair Market Value and Flexible Payments You can defer a portion of the equipment’s cost to the lease's end, with options to purchase at fair market value or upgrade. Step-up or step-down payment options are also available if your business anticipates changes in cash flow. 9. Seasonal Payment Adjustments For businesses with seasonal revenue patterns, CWB National Leasing can tailor a payment cycle to match, such as a six-month-on, six-month-off schedule. Conclusion Leasing your demolition equipment through CWB National Leasing is a strategic decision that offers financial flexibility and operational efficiency. It allows you to stay competitive in the demolition industry by using state-of-the-art equipment while managing your finances effectively, setting your business up for sustainable growth and profitability.

Service

In Stock

Service

New

ISO


Injection Valve Subsurface Safety 4.48 inch

WI Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Sand Jet Perforator

SJP Abrasive Perforator

Introducing the SJP Sand Jet Perforator from Marlin Oil Tools: A Revolutionary Approach to Well Intervention and Perforation Marlin Oil Tools proudly presents the SJP Sand Jet Perforator, an advanced downhole tool designed to redefine the standards of well intervention and casing or tubing perforation. Tailored to integrate seamlessly with the Bottom Hole Assembly (BHA), the SJP Sand Jet Perforator utilizes a high-velocity gel-sand mixture to execute precise, abrasive cuts through well casing, cement, and even rock formations, ensuring optimal wellbore connectivity and performance. Key Features of the SJP Sand Jet Perforator: High-Precision Perforation: The SJP employs a gel-sand jet emitted at high speeds from durable, abrasive-resistant nozzles, targeting the inner walls of the casing for efficient perforation. Versatile Operation Modes: Designed with flexibility in mind, the SJP Sand Jet Perforator can operate in a basic continuous circulation mode or a ball-activated mode, offering adaptability to various operational needs. Durable Nozzle Construction: Crafted from materials resistant to abrasion, the perforator's nozzles withstand the harsh conditions of downhole operations, ensuring longevity and reliability. Enhanced Operational Efficiency: Whether performing casing perforation or preparing wells for further intervention, the SJP streamlines operations, reducing downtime and enhancing productivity. Seamless BHA Integration: The SJP Perforator is engineered to work cohesively with other BHA components, facilitating a comprehensive approach to well intervention tasks. Operational Flexibility: The ball-activated mode allows for pressure testing of the BHA or the use of additional tools below the perforator, expanding the tool's application range. Maximize your well intervention success with the SJP Sand Jet Perforator from Marlin Oil Tools, a leading-edge solution designed for unparalleled precision in casing and tubing perforation. Leveraging a high-speed gel-sand mixture for abrasive cuts, the SJP enhances wellbore access and productivity. With its robust, abrasive-resistant nozzles and dual operational modes, this downhole tool is optimized for a wide range of well conditions, ensuring durability and adaptability. Ideal for both continuous circulation and precise operations, the SJP Sand Jet Perforator is your go-to tool for efficient, reliable well intervention. Why Choose the SJP Sand Jet Perforator from Marlin Oil Tools? Precision and Efficiency: Achieve targeted, efficient perforation for improved well performance. Adaptability to Well Conditions: Tailor your operations with continuous or ball-activated circulation modes. Longevity in Harsh Environments: Count on durable, abrasive-resistant nozzles for sustained operation. Comprehensive Well Intervention: Integrate seamlessly with BHA components for a holistic intervention strategy. The SJP Sand Jet Perforator by Marlin Oil Tools represents the cutting edge in downhole perforation technology, offering oil and gas operators a powerful tool for enhancing well intervention outcomes. Incorporate the SJP into your operations to achieve superior precision, efficiency, and reliability in well perforation tasks.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Radios Leasing

Supercharge Your Business with Leased Radios from CWB National Leasing Are you ready to take your business to the next level, boost your efficiency, and increase your profits? Look no further because CWB National Leasing is your trusted partner when it comes to leasing radios. Here's why choosing us is the smart move for business owners like you: Get Your Equipment Fast In today's fast-paced business world, time is of the essence. At CWB National Leasing, we understand the need for speed, and we've streamlined our process to be lightning-fast. When you apply for a radio lease, you won't be kept waiting. In fact, we take pride in delivering rapid decisions on your lease application. Just how fast are we? Typically, we'll notify your chosen equipment dealer that payment is on its way within a mere 48 hours of your approval. So, while you focus on running your business, you can trust us to handle the logistics, ensuring your radio equipment is delivered promptly. For more details on our approval turnaround times, take a look! Increase Your Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a substantial upfront purchase, consider the advantages of periodic lease payments offered by CWB National Leasing. By opting for leasing, you can free up critical cash resources that can be invested in other essential areas of your business. But that's not all—we go a step further by allowing you to add extra features or accessories to your radio equipment for a minor payment increase. Yes, that's right; we put the "POW" in Buying Power, giving you the flexibility to customize your equipment to meet your unique needs. Control Your Cash Flow Effective cash flow management is crucial for any successful business. When you lease radios with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are structured to ensure small and manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your radio equipment, it will begin generating revenue for your business. This approach makes it easy to strike the right balance between expenses and revenue, putting you in control of your financial success. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are designed to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to align seamlessly with your revenue patterns. With CWB National Leasing, your radio lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing radios through CWB National Leasing isn't just financially prudent; it can also offer potential tax benefits for your business. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully understand how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will help you navigate the tax advantages of leasing radios with confidence. In conclusion, leasing radios with CWB National Leasing is the strategic choice for business owners who are serious about success. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't miss the opportunity to supercharge your business; choose CWB National Leasing for all your radio leasing needs today!

Service

In Stock

Service

New

ISO


ROV Backplate

Backplate

Unleashing the Full Potential of the Lanai ROV with Poseidon M0020 Backplates At Poseidon Robotics, we are dedicated to pushing the boundaries of subsea exploration and empowering our customers with the most advanced and field-friendly tools. Our latest innovation, the Poseidon M0020 backplate, takes the capabilities of our Lanai ROV to new heights, offering a versatile and efficient solution for all your underwater missions. Designed for Field-Friendly Operations When it comes to subsea operations, ease of use and adaptability are paramount. We understand the challenges our customers face in the field, which is why we developed the Poseidon M0020 backplate with their needs in mind. Our team of experts meticulously engineered this backplate to optimize its performance and enhance the overall ROV experience. Unrivaled Connectivity and Expandability The Poseidon M0020 backplate is a feat of engineering, incorporating a carefully planned configuration that includes multiple threaded locations to accommodate various connectors, sensors, and accessories. With 8 locations threaded for 7/16-20 connectors, 7 locations threaded for M10 sensors, and a small M6 location for lights, this backplate opens up a world of possibilities for customization and expansion. Enhanced Functionality with Manipulators and Accessories We designed the M0020 backplate to provide optimal support for a grabber, such as the BLUEPRINTLAB Reach Alpha, and two auxiliary ports for accessories like sonar, USBL, or mini-SVX. This flexibility allows you to tailor the Lanai ROV precisely to your mission requirements, ensuring that you have the right tools at your disposal to get the job done efficiently and effectively. Durable Construction for Deep-Water Missions The Poseidon M0020 backplate is crafted from 7075 Aluminum, renowned for its exceptional strength and durability. This material not only ensures that the backplate can withstand the rigors of challenging subsea environments but also provides a depth rating in excess of 500 meters. With the M0020 backplate, you can explore deeper and reach areas that were previously beyond your grasp. Seamless Integration with Lanai ROV The M0020 backplate is designed specifically for the Lanai ROV, ensuring a perfect fit and seamless integration. As with all our products, the backplate undergoes rigorous testing and quality assurance procedures to meet our stringent standards. When you choose Poseidon Robotics, you can be confident that every component is engineered with precision and dedication to excellence. Elevate Your Subsea Missions with Poseidon Robotics Our Poseidon M0020 backplate is just one example of our commitment to providing innovative solutions that empower our customers to achieve their goals in subsea exploration. Whether you are conducting scientific research, performing complex inspections, or participating in search and rescue operations, our technology equips you with the tools you need to excel in your mission. Discover the Possibilities Today Explore the limitless possibilities that the Poseidon M0020 backplate brings to your Lanai ROV. Take your subsea operations to new depths and expand your capabilities with ease. Get in touch with Poseidon Robotics today to learn more about our advanced backplate and how it can revolutionize your underwater missions. Choose Poseidon Robotics for Unmatched Performance As the premier provider of subsea robotics and ROV solutions, Poseidon Robotics stands as a trusted partner to professionals worldwide. Our dedication to innovation, quality, and customer satisfaction sets us apart, and we are ready to join you on your journey of discovery beneath the waves. Let us be your guide to unlocking the hidden wonders of the deep ocean.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Special Function Pulling Tools

Downhole Tools

Elevate Downhole Operations with HOCA Oil Tools' Special Function Pulling Tools In the rapidly evolving landscape of oil and gas extraction, the right downhole tools can be the key to operational success and efficiency. HOCA Oil Tools understands this imperative and responds with our line of Special Function Pulling Tools, engineered to meet the unique challenges faced during downhole operations. Our specialized tools are designed not just to meet but to exceed the demands of modern well interventions, ensuring that every operation is as seamless and efficient as possible. HOCA’s Special Function Pulling Tools: Tailored Solutions for Unique Downhole Challenges Our Special Function Pulling Tools encompass a variety of designs, each tailored to address specific downhole needs and challenges. Whether it's retrieving stuck equipment, deploying complex assemblies, or performing precision interventions, our tools are crafted to provide solutions that enhance operational outcomes. Made with the highest quality materials and precision engineering, HOCA’s Special Function Pulling Tools are the embodiment of our commitment to innovation, quality, and reliability. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are not just suppliers; we are partners in your downhole success. Our Special Function Pulling Tools are a testament to our dedication to advancing downhole operations through innovative solutions. By choosing our specialized tools, you are not only equipping your operations with top-tier downhole technology but also aligning with a partner dedicated to providing exceptional service and support. Incorporating HOCA’s Special Function Pulling Tools into your downhole operations is a step towards enhanced efficiency, safety, and cost-effectiveness. Our commitment to quality and innovation ensures that our tools stand up to the challenges of the oilfield, driving your operations to new heights of success. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who depend on our Special Function Pulling Tools for their unique operational challenges. Elevate your downhole operations with HOCA Oil Tools – where exceptional quality meets innovative solutions.

Buy

In Stock

Product & Service

New

API

Air Freight


CSA 60 unit, non-Locking, FAST charger rack

Miner's Cap Lamp Charging Station

Provix in New Lowell

More information

Boost Your Equipment’s Readiness with the CSA 60 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to introduce the CSA 60 Unit Non-Locking FAST Charger Rack (model NWI-NWCR-60BC-SSI), a high-capacity, single-sided charging solution designed for the fast-paced needs of modern mining and industrial operations. This charger rack is engineered to keep your Wisdom lighting equipment fully charged and ready for any task. Rapid Charging for Maximum Efficiency The CSA charger rack is optimized for the WISE LITE2, LAMP3A, and 4A models, offering an impressive charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This quick turnaround is essential for minimizing downtime and ensuring your team's equipment is always operational. High-Capacity Charging Solution With the ability to charge up to 60 units simultaneously, this charger rack is perfect for large-scale operations. Its single-sided design is space-efficient, making it an ideal fit for equipment rooms, charging stations, or any workspace where space is at a premium. Designed for Convenience and Accessibility The non-locking feature of the CSA 60 Unit Charger Rack provides easy and quick access to all charging ports, facilitating efficient management of multiple devices. This accessibility is particularly beneficial in fast-paced work environments where time is critical. Durable and Reliable Construction Built to withstand the demanding conditions of mining and industrial environments, the CSA charger rack is both durable and reliable. Its sturdy construction ensures long-lasting performance, making it a valuable investment for any operation. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and rental equipment providers who need to charge a large number of devices efficiently and reliably. Its high capacity and fast charging capabilities make it an indispensable tool for large teams. Elevate Your Charging Capabilities Today The Wisdom CSA 60 Unit Non-Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to discover more about this efficient and practical charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


MLE Clamp for ESP's

ESP (Electric Submersible Pump) Cable Protector

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Buy

In Stock

New

New

API

Air Freight


Dump Bailer Service

InWaTec Combined: Enhancing Well Intervention with Precision Dump Bailer Services In the world of well intervention, precision and reliability are paramount. InWaTec Combined is proud to introduce our Dump Bailer services—a cost-effective and efficient solution for transporting fluids to precise points within the wellbore. These services are essential for various applications, ensuring that operations are not only successful but also streamlined for maximum efficiency. Strategic Applications for Optimal Results Our Dump Bailer services are versatile, serving a range of critical applications: Cementing Operations: Deploying cement onto permanent plugs to secure well integrity is executed with precision, ensuring that the cement is placed exactly where it is needed. Acidizing: We specialize in depositing acid precisely at scale restrictions or on flow control items, which may be scaled up to restore functionality and enhance flow. These strategic applications are vital in extending the life of wells and restoring their optimal functionality. Features & Benefits: A Blend of Simplicity and Efficiency InWaTec Combined’s Dump Bailers are designed with the industry's needs in mind, and they come with a host of features and benefits: Standard Slickline Connections: Our dump bailers are equipped with industry-standard connections, ensuring compatibility with a wide range of toolstrings and ease of integration. Simple, Robust Design: Durability and ease of use are at the heart of our design philosophy, providing a tool that withstands the rigors of well operations while being user-friendly. Quick and Easy Field Redress: Time is of the essence in well operations, and our dump bailers are designed for rapid redress in the field, minimizing downtime. Modular Design Flexibility: We understand that well conditions vary, which is why we offer modular designs that allow for field changeable variations in length to suit any well's requirements. Customizable Burst Discs: With the ability to supply various burst discs, we tailor our tools to suit every unique application, ensuring that the operation is conducted with the right specifications for optimal results. Cost-Effectiveness: Our Dump Bailer services provide a cost-effective method for fluid transport within the wellbore, ensuring that budgetary constraints do not compromise well servicing operations. A Partner in Well Intervention At InWaTec Combined, we stand as your partner in well intervention. Our Dump Bailer running services are a testament to our commitment to providing solutions that are not just effective but also enhance the safety and efficacy of your well operations. Conclusion: Precision Fluid Deployment with InWaTec Combined In summary, InWaTec Combined's Dump Bailer services represent an essential component in the well servicing toolkit. With our focus on precision, ease of use, and cost-effectiveness, we ensure that your well intervention operations are performed with the highest standards of accuracy and efficiency. Choose InWaTec Combined for services that deliver where it counts—down the wellbore.

Service

In Stock

Service

New

API

Land Freight


EnviroBlu 1 Litre Equipment Cleaner

EnviroBlu Cleaner and Degreaser

Discover the Power of EnviroBlu: Revolutionizing Hand Tool and Small Equipment Cleaning In the relentless environments of the oil and gas industry, the need for efficient and effective cleaning solutions is paramount. We at Mekapisk EnviroBlu Solutions Inc. are proud to introduce the 1-litre EnviroBlu cleaner—a game-changer for maintaining hand tools and small equipment parts. This isn't just a cleaner; it's a revolution in industrial maintenance, combining powerful results with a commitment to sustainability. The EnviroBlu Vision At EnviroBlu, we are driven by a singular vision: to create a cleaner and safer world for everyone. Founded on the indigenous values of respecting and protecting our lands and waters, Mekapisk EnviroBlu Inc. and the EnviroBlu brand are dedicated to transforming industries through sustainable practices. Why Choose EnviroBlu? EnviroBlu: The Eco-Friendly Choice EnviroBlu is committed to providing the best environmentally safe cleaning and degreasing products available in the market today. Our water-based, non-toxic, phosphate-free formula ensures fast and reliable cleaning results without harming the environment. With EnviroBlu, you achieve industrial-strength cleanliness while upholding your commitment to sustainability. 1. Environmentally Safe EnviroBlu’s water-based, non-toxic, and phosphate-free formula makes it safe for both people and the environment. Certified food safe by the Canada Food Inspection Agency (CFIA) and recognized as a Green Marine Partner, EnviroBlu is tough enough to clean oil rigs but safe enough for your kitchen. 2. Cost-Effective EnviroBlu products are designed to save you money. By cutting down cleaning time and reducing the need for multiple products, EnviroBlu helps you streamline your maintenance processes. This means fewer purchases, lower overheads, and significant cost savings—all while ensuring a safe and clean environment for your employees and customers. 3. Fast & Efficient EnviroBlu’s advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring quick and thorough cleaning. Our formula performs as well or better than our competitors while exceeding environmental standards, making your cleaning tasks faster and more efficient. 4. Versatility Across Industries Whether it's in industrial, commercial, or residential settings, EnviroBlu delivers consistent and reliable performance. It’s the go-to solution for cleaning hand tools, small equipment parts, and more. Industrial: EnviroBlu helps reduce environmental contaminants across various industries, including offshore, transportation, aerospace, manufacturing, and more. Commercial: EnviroBlu is an eco-friendly solution for commercial cleaners and large retail environments such as supermarkets and big-box stores. It’s safe for use around food and rated as environmentally friendly. Residential: Strong enough to clean an offshore oil rig but safe enough to clean your dishwasher, EnviroBlu is perfect for all home cleaning tasks, including around the garage and garden. Green Marine Partner: Advancing Environmental Excellence EnviroBlu is a Green Marine Partner, participating in North America's leading environmental certification program for maritime industries. This voluntary initiative helps participants improve their environmental performance beyond regulations, targeting key issues related to air, water, and soil quality. Stay Green, Go Blu! Choose EnviroBlu for your hand tool and small equipment cleaning needs. Our 1-litre bottle delivers powerful cleaning performance while protecting the environment. Embrace a cleaner, greener future with EnviroBlu.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


Pay Invoices in Local Currency

FX Business Services

Simplify Your International Business Finances with Dunbridge Financial: Unlocking the Advantage of Paying Invoices in Local Currency In the ever-expanding global market, businesses face the challenge of managing international transactions efficiently. At Dunbridge Financial, we understand the complexities involved in paying suppliers and the need for better pricing and foreign exchange advantage. Our Business Services are tailor-made to empower your business with seamless international payment solutions, helping you take your enterprise to new heights. Pay Invoices with the Foreign Exchange Advantage Paying invoices in local currency brings with it a host of benefits, including foreign exchange advantages and better pricing. With Dunbridge Financial, you gain access to a platform that simplifies your international business payments, allowing you to optimize your transactions and save on unnecessary costs. All Business Services Under One Roof At Dunbridge Financial, we believe in providing comprehensive solutions for your international business needs. Here's what we offer: 1. Open Your Free Global Business Account Within 24hrs Time is of the essence in the business world, and we value yours. With Dunbridge Financial, you can open your free global business account in just 24 hours, enabling you to jumpstart your international financial journey swiftly. 2. Concierge Customer Service We pride ourselves on embedding with our customers and understanding their unique needs. Each of our customers is assigned a dedicated account manager who collaborates closely with you to develop a customized payment strategy that aligns perfectly with your business objectives. Take the complexity out of your FX payment strategy and experience the utmost support and guidance. 3. Fast and Secure International Payments Speed and security are paramount when it comes to international payments. Our global banking relationships enable you to make cost-effective and secure transactions to over 100 currencies and 120 countries. We use a market-leading platform through our payment service partners, which is compliant with ISO27001, ensuring that your funds and data are in safe hands. 4. Multi-Currency Accounts, in Your Company's Name Managing multiple currency balances can be challenging, but not with Dunbridge Financial. Enjoy the convenience of real accounts in your company name, allowing you to receive like a local with IBAN, ACH, SEPA capabilities. Seamlessly transfer your funds between currencies as and when needed. 5. Mass Payments Simplify your accounts payable processes with Dunbridge Financial's mass payments feature. Upload, manage, and pay up to 1000 payees at a time, streamlining your financial operations and saving valuable time and effort. Join Us Today and Streamline Your International Business Finances Don't let complexities and uncertainties hinder your business growth. Join Dunbridge Financial today and experience the power of seamless international payments. Unlock the foreign exchange advantage, optimize your invoicing processes, and take your business to new heights on the global stage. Empower your international business with Dunbridge Financial. Sign up now and unlock a world of efficiency, security, and success. Simplify your international transactions and focus on what truly matters - the growth of your business.

Service

Made to Order

Service

New

ISO

Air Freight


Bag Oil Spill Kit

Spill Kit, inclusive: absorbent pads, pillows, socks, disposal bags, nitrile gloves

OilHungry in Stoney Creek

More information

The spill kit contains, 5 Oil-Only Absorbent Pads, 3 Oil-Only Absorbent Pillows, 2 Oil-Only Absorbent Socks (3"x4'), Disposal bags, Nitrile gloves. This spill kit for effective and efficient cleanup and containment of oil-based spills in various settings. The kit, equipped with Oil-Only Absorbent Pads, Pillows, Socks, disposal bags, and Nitrile gloves, provides a comprehensive solution for managing and addressing oil spills. It can be particularly useful in industrial facilities, storage areas, transportation operations, or any environment where oil-based liquids are handled. The spill kit has a total absorption capacity, capable of soaking up 15 liters (3.87 gallons) of liquid. This means that oil-based spills, the combined capabilities of the Oil-Only Absorbent Pads, Pillows, and Socks within the kit allow for the containment and absorption of up to 15 liters of spilled liquids. This substantial capacity ensures that the spill kit is well-equipped to handle moderate to sizable spills, making it a reliable and effective solution for various industrial and environmental settings. Oil-Only Absorbent Pads Oil-Only Absorbent Pads are highly effective for the rapid cleanup of oil-based spills. Made from polypropylene material, these pads are specifically engineered to selectively absorb oils while repelling water. The pads boast a fine-fiber construction, allowing for quick absorption and retention of oil-based liquids. With a size of 12” x 12”, these pads are versatile and can be used in various settings, including industrial facilities, automotive workshops, and marine environments. Oil-Only Absorbent Pillows Oil-Only Absorbent Pillows are strategically deployed on oil-based spills for rapid absorption. Their polypropylene construction ensures targeted cleanup, selectively absorbing oils while repelling water. These pillows contribute to the efficiency and environmental responsibility of spill response in workplaces where oil-based liquids are handled. Oil-Only Absorbent Socks (3"x4') Oil-Only Absorbent Socks are placed to create a barrier, containing, and preventing the spread of oil-based spills. It allows to adapt to different surfaces, ensuring efficient and targeted spill response. These socks are integral components of spill kits and are valuable in various industries where oil-based liquids are handled. Usage of Disposal bags Disposal bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met oil-based spills. Nitrile gloves Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. Applications: • Integral part of spill kits • Used in industrial facilities, and areas handling oil-based liquids.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Blockchain

Software Development

Eleks in Toronto

More information

ELEKS: Empowering Energy Sector Transformation with Blockchain Solutions In the dynamic landscape of the energy sector, innovation isn't just a trend – it's a necessity. ELEKS, as a trailblazer in software engineering, brings to the table a game-changing proposition that holds the potential to reshape the energy industry: blockchain-powered business solutions. Through our deep-rooted energy sector technology expertise, we're introducing a new era of possibilities that redefines data management, transparency, security, and efficiency. Here's a glimpse into how ELEKS can be your partner in harnessing the full potential of blockchain technology for unparalleled growth: Empower Data Management: Blockchain technology is a game-changer in data management. ELEKS' solutions enable energy companies to handle data with unprecedented efficiency, accuracy, and security. Asset Ownership Tracking: Say goodbye to ambiguity. Our blockchain-powered solutions provide a foolproof system for tracking asset ownership, ensuring transparency and accountability. Swift and Secure Transactions: Energy trading just got a whole lot smarter. ELEKS leverages blockchain to facilitate quick and secure settlement and recording of transactions, eliminating intermediaries and streamlining processes. Elevated Business Transparency: Transparency is no longer a challenge. Our blockchain solutions bring transparency to the forefront, ensuring all stakeholders have access to real-time, tamper-proof data. Auditability Redefined: Auditing becomes a breeze. ELEKS' blockchain solutions offer auditability beyond comparison, giving regulatory bodies instant access to secure and tamper-proof energy data. Unprecedented Security: Security isn't an option; it's a mandate. Our solutions empower energy companies to maintain robust security protocols, ensuring data integrity and mitigating risks. Regain Control: Ownership with control. Our blockchain-powered solutions allow data source owners to maintain complete control over security and accessibility, reinforcing trust and control. Efficiency Unleashed: Efficiency is the heart of our solutions. By eliminating intermediaries and enhancing data accuracy, we drive efficiency to new heights. Data-Driven Decision Making: Make informed decisions, backed by reliable data. ELEKS' solutions equip energy companies with accurate and real-time insights, facilitating data-driven strategies. ELEKS: Your Path to Energy Innovation ELEKS isn't just a service provider; we're your innovation enabler. With our energy sector technology expertise, we're not just implementing blockchain solutions – we're rewriting the energy sector narrative. Our goal is to empower energy companies with the tools they need to thrive in a data-centric world. Embrace a future where blockchain technology shapes your energy operations, revolutionizing data management, transparency, and efficiency. With ELEKS by your side, the possibilities are limitless, and your journey towards energy innovation is destined for success.

Service

Made to Order

Service

New

ISO


HCR-6000

HCR-6000

Introducing HCR-6000, the latest addition to Cleanstream's ‘Environmentally Responsible’ modified acid product line. HCR-6000 is a powerful, low fuming Modified acid that has solubilizing abilities of 15%-25% HCI (concentrate). It's the perfect solution for minimizing the hazardous exposure levels and fuming properties of Hydrochloric acid. HCR-6000 is specifically designed to cater to the needs of the oil and gas industry, where the use of mineral acids is common practice. But unlike traditional hydrochloric acid, HCR-6000 is a clear, low-fuming acid with a low vapor pressure. This means that it poses less of a risk to human health and the environment. One of the standout features of HCR-6000 is its comprehensive spending nature. It is more than two times slower to spend than conventional HCl acid, making it an economical choice for your operations. And if that's not enough, HCR-6000 is also classed as a Class 1 acid package, making it easy to transport and handle. HCR-6000 is also highly customizable. It can be enhanced with conventional oilfield chemistry to cater to the specific needs of your operations. It offers high thermal stability, no precipitation from spent fluids, and iron stabilization effect (nano particles), making it a versatile solution for various applications such as spearhead acid, fracturing/matrix, production, injection wells, and scale treatment. HCR-6000 is also oil compatible, making it an excellent choice for your oil and gas production. Its high spent pH of over 4.5 makes it easy to dispose of, reducing plant interruptions and making it an environmentally responsible choice. At Cleanstream, we are committed to providing our customers with the best possible solutions that are both environmentally responsible and efficient. With HCR-6000, we are taking another step towards a cleaner and safer future for the oil and gas industry. Contact us today to learn more about HCR-6000 and our other ‘Environmentally Responsible’ products.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


Snubbing

Enhancing Snubbing Operations: InWaTec Combined’s High-Pressure Mini-Coil Services At InWaTec Combined, we understand the critical nature of snubbing operations in well intervention and maintenance. Our Mini-Coil Tubing services are specifically designed to enhance these operations, providing a solution that balances the delicate requirements of fluid placement and well lifting with the necessity for high-pressure performance. Optimal Fluid Placement: The Mini-Coil Tubing is adept at delivering small quantities of fluids precisely where they are needed. This precise placement is particularly beneficial during snubbing operations, where control and accuracy are paramount to successful well control and intervention. Efficient Well Lifting: When it comes to lifting wells into production, especially during snubbing operations, our Mini-Coil Tubing shines with its ability to handle high pumping pressures. This capability ensures that wells are brought into production efficiently and reliably. High-Pressure Operations: While Mini-Coil Tubing may face limitations in flow rate and mechanical snubbing force due to its smaller size, it compensates with an exceptional capacity for withstanding higher pumping pressures. This makes it particularly useful in situations where pressure integrity is crucial. The nature of snubbing operations often involves dealing with wells under pressure. The high-pressure resistance of our Mini-Coil Tubing means it can be deployed in environments that are too challenging for larger, conventional coiled tubing. This feature opens up new possibilities for conducting critical well interventions safely and effectively. InWaTec Combined's Mini-Coil Services are not just about providing equipment; they're about delivering a comprehensive solution. We understand that each well and operation has its unique set of challenges. Our Mini-Coil Tubing services are complemented by a team of experienced professionals who ensure that every operation is executed with precision, efficiency, and adherence to the highest safety standards. Customized Solutions: Recognizing the unique demands of each operation, InWaTec Combined offers customized Mini-Coil solutions. We work closely with clients to understand their specific needs and challenges, ensuring our Mini-Coil Tubing services are tailored to meet the particular requirements of their snubbing operations. Choose InWaTec Combined for your snubbing operation needs, and benefit from the advanced performance of our Mini-Coil Tubing services. Our commitment to innovation, safety, and operational excellence ensures your operations are not just maintained but enhanced. Let us help you achieve your well intervention goals with our high-pressure, precision-driven Mini-Coil services.

Service

In Stock

Service

New

API

Land Freight


Desks Leasing

Enhance Your Workspace with Desk Leasing from CWB National Leasing Creating an Efficient and Productive Office Environment with Flexible Furnishing Solutions For businesses looking to create or revamp their office spaces, having the right desks is crucial for ensuring a productive and comfortable work environment. Leasing desks through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to optimize their workspace. Here’s how leasing desks can benefit your business: 1. Quick Access to Modern Office Furniture CWB National Leasing values the importance of a well-equipped office space in enhancing productivity. They offer a fast leasing process, with decisions typically made within 48 hours of your application. This rapid service ensures that your desks can be delivered and set up quickly, transforming your office space without significant delays. 2. Increased Financial Flexibility Leasing desks with CWB National Leasing enhances your financial power. It allows you to conserve capital by opting for periodic payments over a large upfront purchase. The flexibility to add extra features or accessories to your desks for a small payment increase allows for customization to meet specific office needs and ergonomic considerations. 3. Effective Cash Flow Management Manageable lease payments over the term mean your desks start contributing to your business’s efficiency while they're being paid off. This approach helps maintain a balanced expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing desks can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease desks through CWB National Leasing is a strategic decision that equips your business with essential office furniture while maintaining financial flexibility. It ensures access to high-quality desks, vital for creating a productive and comfortable working environment, without the financial strain of a large upfront investment. This leasing approach enables enhanced office aesthetics, improved employee comfort, and increased overall productivity, helping your business to thrive in a competitive corporate landscape.

Service

In Stock

Service

New

ISO


Security systems Leasing

Secure Your Business with Security System Leasing from CWB National Leasing Enhancing Safety and Peace of Mind with Advanced Security Solutions In today's business world, the security of your premises, assets, and personnel is paramount. Leasing security systems through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and comprehensive solution for businesses seeking to bolster their security measures. Here’s how leasing security systems can benefit your business: 1. Rapid Access to Cutting-Edge Security Technology CWB National Leasing understands the critical importance of security in your business operations. They offer a swift leasing process, with decisions typically made within 48 hours of your application. This ensures that your security systems can be delivered and installed quickly, providing immediate enhancement to your security measures. 2. Increased Financial Flexibility Leasing security systems with CWB National Leasing enhances your buying power. It allows you to conserve capital by opting for manageable periodic payments over a significant upfront purchase. The flexibility to add extra features or accessories to your security systems for a small payment increase enables customization to meet specific security needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your security systems start contributing to your business’s safety while they're being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, essential for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in revenue, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing security systems can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease security systems through CWB National Leasing is a strategic decision that equips your business with essential safety tools while maintaining financial flexibility. It ensures access to the latest security technology, vital for protecting your business assets and personnel, without the financial strain of a large upfront investment. This leasing approach enables enhanced security, peace of mind, and a safe working environment, contributing significantly to the overall well-being and success of your business.

Service

In Stock

Service

New

ISO


Permanent Miniature Bridge Plug (PMBP)

Miniature Bridge Plug (0.75 - 1.37 inch)

Are you in need of a high-quality, dependable bridge plug that can be deployed in small-bore conditions? Look no further than ID OilTools' Permanent Miniature Bridge Plug (PMBP)! Our PMBP system is specially designed to mechanically convert external pressure into additional sealing force, using metal grippers to withstand differential pressures of up to 7,500 PSI at 350°F with HSN elements (with other element options available upon request, such as Viton or Aflas). Our PMBPs boast a number of features that make them the ideal choice for pressure control in the 3/4" (19.05mm) to 1.75" (44mm) setting range. With a small O.D., they can be easily run in tubing with size restrictions like coiled tubing, while still forming a fluid tight seal against the tubing wall. Plus, all of our miniature bridge plugs have a pump-through check-valve option. But the benefits of our PMBPs don't stop there! They can be used in a variety of applications, including pressure control for snubbing operations, as a mechanical barrier to replace failed downhole equipment, as a mechanical barrier for coil tubing/velocity string retrieval, and for coil tubing cleanout using its pump-through feature for nitrogen purges. If you're in need of a high-quality, dependable bridge plug for small-bore conditions, look no further than ID OilTools' Permanent Miniature Bridge Plug. Contact us today to learn more about our PMBPs and how they can benefit your operation!

Buy

In Stock

Product & Service

New

API

Sea Freight


SCADA Systems

Software Development

Eleks in Toronto

More information

Elevate Your Energy Sector with ELEKS: Unleashing SCADA Systems and More In the realm of energy and utilities, where stability, efficiency, and innovation reign supreme, ELEKS emerges as your strategic partner, offering a powerhouse of expertise that redefines industry standards. Our proficiency in supervisory control and data acquisition (SCADA) systems is poised to transform your operations, ensuring unwavering power delivery, cost optimization, and the seamless integration of cutting-edge trends like smart grids. Prepare to embark on a journey of empowerment with our team of energy software development experts, who are dedicated to crafting advanced SCADA systems that harmoniously blend with demand-side response analysis (DSM) and energy management systems. The result? Enhanced transmission operations, cost efficiency, and an overall uplift in operational prowess. Revolutionizing Energy Sector Technology: The ELEKS Edge Consistent Power Delivery: Our SCADA systems provide the backbone for maintaining consistent and stable power delivery. Through meticulous monitoring and control, we ensure reliability that keeps the lights on and operations running smoothly. Optimized Costs: ELEKS' expertise extends to optimizing costs, creating solutions that not only meet energy demands but also enhance resource allocation, reducing unnecessary expenditure. Enabling Smart Grids: In an era where smart technologies dominate, our solutions lay the groundwork for seamless integration with smart grids, transforming your energy landscape into one of intelligence and adaptability. Advanced SCADA Systems: Our energy software development experts are primed to construct advanced SCADA systems that serve as the backbone of your operations, ensuring real-time data, control, and responsiveness. Demand-Side Response Analysis (DSM): Seamlessly integrate DSM to your SCADA framework, enabling you to respond dynamically to energy demand fluctuations, optimizing usage, and minimizing waste. Energy Management Systems: Elevate your energy management capabilities with systems designed to intelligently analyze, allocate, and optimize energy resources, fostering sustainability and efficiency. Enhanced Transmission Operations: ELEKS' solutions empower your transmission operations, minimizing downtime, enhancing system stability, and ultimately improving customer satisfaction. Future-Proof Solutions: Our focus on cutting-edge trends ensures that your energy infrastructure is ready to adapt to the technological evolution of the industry. Customization to Your Needs: We understand that each energy company has unique requirements. Our solutions are tailored to your specific needs, ensuring maximum efficiency and effectiveness. Operational Efficiency Amplified: From power delivery to cost management, our comprehensive approach ensures operational efficiency that drives your energy business forward. Experience Energy Excellence with ELEKS At ELEKS, we're not just about creating software – we're about catalyzing transformation. Our energy sector technology expertise converges with your goals, setting the stage for unparalleled growth, efficiency, and innovation. Join us in reshaping the future of energy and utilities, where SCADA systems, DSM, and energy management systems blend harmoniously to create an energy landscape that's not just efficient, but exceptional. ELEKS is your partner on the journey to a brighter, more sustainable energy future.

Service

Made to Order

Service

New

ISO


Maui ROV, Heavy Inspection Class ROV

Remote Operated Vehicle

Designed for the Extraordinary - Meet Maui ROV Are you ready to take your subsea operations to new heights? Introducing Maui ROV, the ultimate subsea solution designed with large payloads in mind. With its cutting-edge vectored thruster layout, professional Aluminum frame, and remarkable payload capacity, the Maui ROV stands out as a true game-changer in the industry. Mastering the Depths The Maui ROV is built to conquer challenging dives with ease, making it the ideal choice for survey work or heavy lifting tasks. Its impressive capabilities stem from the ingenious combination of design elements that result in unparalleled performance. Powerful Features for Unmatched Performance 1. Industrial Flight Computer and Linux User Interface: Powered by Mission Robotics, the Maui ROV features an industrial flight computer and user-friendly Linux interface, ensuring seamless control and precise maneuverability. 2. Topside Integrated Console: Equipped with a 22-inch sunlight-readable monitor and a hand controller, the Topside Integrated Console eliminates the need for additional equipment, streamlining your operations. 3. 6-Axis Stability and Fully Stabilized Mode: The Maui's ROV flight computer supports 6-axis stability, providing unmatched control and stability during underwater missions. 4. Exceptional Payload Space: Utilizing smaller diameter thrusters stacked vertically, the Maui ROV boasts exceptional payload space, enabling it to carry various instruments such as the Coda Octopus 3D Sonar, INS, Multibeam Profilers, or Sub Bottom Profilers. Experience the Specifications of Excellence Take a closer look at the impressive specifications that make the Maui ROV an indispensable asset for your subsea ventures: • Depth Rating: 400m • Dimensions: 725x465x425mm (LWH) • Weight in Air: 31.2kg • Payload Capacity (Fresh Water): 9.3kg • Payload Area: 610mm x 457mm • Thrusters: 8 lateral (45deg), 6 vertical • Ballard Pull: 27kg lateral, 28kg vertical • Top Speed: 3 knots • Video: 1080 HD IP camera with tilt • Aux Video: 2 HD camera inputs • Lights: 8x 1,500 Lumen each • Connectivity: 1x Ethernet, 4x Serial • Aux Power: 5/12/24/48VDC regulated Topside Integrated Console Specifications: • Output Voltage: 400VDC, 3kW • Input Voltage: 240VAC, 15A maximum • Monitor: 22in HD sunlight-readable • Case: Wheeled, 610x420x260mm, 24kg • Fully Isolated Output with LIM • Intel i5 PC with Windows 10 Installed • Aux HDMI Monitor Output Tether Specifications: • Breaking Strength: 250kg • Diameter: 9.1mm • Length: Up to 500m • Neutral in Fresh Water Explore the Depths with Maui ROV Unleash the power of heavy payloads and challenging dives with the Maui ROV. Let our state-of-the-art technology redefine your subsea operations and elevate your success.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Subsurface Safety Valve for Injection Wells 5.4 inch

WI Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Generator sets Leasing

Power Up Your Projects: Generator Set Leasing with CWB National Leasing Fuel Your Business Growth with Smart Equipment Leasing Solutions In the construction and industrial sectors, reliable power is non-negotiable. Generator sets play a crucial role in ensuring your operations run smoothly. Leasing your generator sets through Canadian Western Bank (CWB) National Leasing offers a flexible, financially smart solution that caters to your business needs. Here’s how leasing generator sets can energize your business operations: 1. Quick Equipment Access CWB National Leasing values your time and project deadlines. They ensure a swift review and decision on your lease application, typically notifying your equipment dealer about the payment within 48 hours of approval. This quick turnaround means you can have your generator sets delivered and operational promptly, minimizing any project delays. 2. Increased Financial Leverage Leasing with CWB National Leasing enhances your purchasing power. It enables you to acquire essential generator sets through manageable periodic payments rather than a significant upfront cost. This approach frees up capital for other business areas, and you can even add extra features or accessories to your generator sets with a slight increase in payments. 3. Optimized Cash Flow Management Manageable lease payments spread out over time mean your generator sets start contributing to your revenue even as you pay for them. This strategy helps maintain a healthy balance between your expenses and income, crucial for business stability and growth. 4. Flexible Payment Options CWB National Leasing offers tailored payment plans, including seasonal, semi-annual, or annual options, to match your business's revenue cycle. This flexibility is particularly beneficial for businesses with fluctuating income, ensuring payments align with your financial flow. 5. Potential Tax Advantages Leasing may provide tax benefits, as it allows you to expense lease payments rather than depreciating the capital cost of the generator sets. Consulting with a tax advisor can help you understand how leasing can optimize your business’s tax situation. Conclusion Choosing to lease your generator sets through CWB National Leasing is a strategic decision that equips your business with the necessary power infrastructure while maintaining financial agility. It ensures that you have the power support you need for your projects without the burden of a large upfront investment, paving the way for efficient operations, growth, and profitability in the demanding construction and industrial landscapes.

Service

In Stock

Service

New

ISO


Diagnostic equipment Leasing

Elevate Your Auto Service with Vehicle Diagnostic Equipment Leasing from CWB National Leasing Revolutionizing Your Automotive Diagnostics with State-of-the-Art Equipment Solutions For automotive repair shops, dealerships, and service centers, having the latest vehicle diagnostic equipment is essential for providing accurate and efficient service. Leasing this equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and efficient solution for businesses looking to enhance their diagnostic capabilities. Here’s how leasing vehicle diagnostic equipment can benefit your automotive business: 1. Fast Access to Advanced Diagnostic Tools CWB National Leasing recognizes the importance of having up-to-date diagnostic tools in the automotive industry. They offer a rapid leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround ensures that your diagnostic equipment can be delivered and operational swiftly, enhancing your service quality and turnaround times. 2. Enhanced Financial Flexibility Leasing vehicle diagnostic equipment with CWB National Leasing increases your buying power. It allows you to spread costs over manageable periodic payments rather than a large upfront investment, freeing up capital for other important business operations. The flexibility to add extra features or accessories to your equipment for a small payment increase enables customization to meet specific service needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your diagnostic equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a healthy balance between expenses and income, crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing vehicle diagnostic equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease vehicle diagnostic equipment through CWB National Leasing is a strategic decision that equips your automotive business with the latest tools while maintaining financial agility. It ensures access to advanced diagnostic technologies, vital for providing high-quality vehicle maintenance services, without the financial burden of a large upfront investment. This leasing approach enables enhanced service efficiency, improved diagnostic accuracy, and increased customer satisfaction, helping your automotive business to thrive in a competitive market.

Service

In Stock

Service

New

ISO


HDI 2000P Pressure Gauge System

Electronic Pressure Gauge

When it comes to accurate and reliable pressure measurement in demanding environments, the HDI 2000P Pressure Gauge System stands out as the ultimate solution. With its intrinsically safe, certified, solid-state electronic gauge, the 2000P provides exceptional performance and readability, regardless of lighting conditions. Unparalleled Durability and Versatility: Designed to withstand high vibration and rugged environments, the HDI 2000P excels where indication at the point of measurement is crucial. Whether it serves as a primary or secondary readout, this gauge system delivers unmatched performance in a wide range of applications. Expanded Pressure Ranges and Certifications: With pressure ranges of up to 20,000 psi for ATEX/IECEX certification and 16,000 psi for CSA certification (with 20,000 psi coming soon in 2023), the HDI 2000P accommodates various operational requirements. Rest assured, all HDI pressure equipment is rated within an impressive accuracy of 0.50% of full scale, ensuring precise measurements every time. Field-Proven and Reliable: Built on HDI's 30-year field-proven platform, the 2000P has a solid reputation for reliability and durability. Having been in the field for over 10 years, this gauge system has consistently demonstrated its ability to provide safety, accuracy, reliability, and low maintenance, making it the trusted choice of industry professionals. Tailored Configurations to Suit Your Needs: The HDI 2000P can be customized to meet the unique requirements of your application. With configurations available such as 4-20mA output (additional barrier required), 0-1 volt output, and slave or secondary displays, you can optimize the system to align seamlessly with your operational setup. Key Benefits and Features: • Battery-powered for convenience and portability • Field repairable system, ensuring minimal downtime • Low battery indicator for uninterrupted operation • Wide pressure range options, from 30 psi to 20,000 psi (kPa or bar available upon request) • Impressive 10 psi resolution for precise measurements • Multiple connection types, including 2" 1502, 2" 2001/2202, or flanged connections • Flexible output options with 4-20mA or 0-1 volt available • Solid-state platform with no fluids or moving parts, ensuring long-term reliability • Analog bar graph with a divided scale for clear visualization • Consistent performance in high vibration environments, maintaining accuracy in any condition • Simple interface for easy calibration, reducing maintenance efforts Experience the HDI Advantage: When you choose the HDI 2000P Pressure Gauge System, you gain access to unparalleled accuracy, durability, and versatility. Our commitment to delivering superior products is matched only by our dedication to exceptional customer service. Contact our knowledgeable team today to discuss your specific application and explore how the HDI 2000P can revolutionize your pressure measurement needs. Trust HDI for unmatched performance in even the most challenging environments. Houston Digital Instruments - Where Reliability Meets Precision

Buy

In Stock

Manufacturer

New

API

Air Freight


Wireline Conveyed Perforating

Precision in Every Shot: InWaTec Combined’s E-line Wireline Conveyed Perforating Services InWaTec Combined is at the vanguard of well perforation technology, offering sophisticated E-line Wireline Conveyed Perforating Services that stand as a testament to our commitment to operational excellence and innovation. In the realm of well completion and stimulation, the strategic deployment of perforating guns is crucial, and the use of wireline—or electric line—has been the traditional and preferred method for this critical operation. The rationale behind the enduring preference for wireline-perforated wells is multifaceted: Real-Time Depth Control: With wireline, our experts can ensure that perforations are placed precisely where they need to be, optimizing the flow of hydrocarbons and enhancing well productivity. Selective Perforation: The ability to select specific zones for perforation is a significant advantage, especially in complex reservoirs with multiple pay zones. Reduced Logistics: Compared to tubing deployment, wireline operations require less equipment on site, translating into a leaner, more cost-effective operation. Historically, wireline perforating guns were classified based on their application relative to the completion process—whether as casing guns used before the completion is run, or as through-tubing guns utilized through the completion. However, the landscape has evolved. Today, InWaTec Combined harnesses the flexibility of wireline to run any type of engineered perforating system, alongside a broad spectrum of explosive devices, tailored to the bespoke needs of each well. At InWaTec Combined, our E-line Wireline Conveyed Perforating Services are not a one-size-fits-all solution. We recognize that each well is unique, with its own set of geological, technical, and operational considerations. Therefore, we offer customized perforating strategies that maximize well potential and align with our clients' production objectives. Our arsenal of wireline-conveyed perforating tools includes the latest in shaped-charge technology, ensuring clean and deep perforations for optimal reservoir connectivity. With these advanced tools at our disposal, we can overcome the challenges presented by any well environment, whether requiring high shot density, deep penetration, or specific orientation. Choosing InWaTec Combined for your wireline conveyed perforating needs means opting for a partner who prioritizes precision, efficiency, and safety. Our services are designed to minimize the time between perforation and production, ensuring that your operations transition smoothly and swiftly to the production phase. Trust InWaTec Combined to deliver wireline conveyed perforating services that are not just about making holes—they're about opening pathways to prosperity. Let us bring our precision-perforating expertise to your wellsite, and together, we'll unlock the full potential of your reservoirs.

Service

In Stock

Service

New

API

Land Freight


International Education Fees

Personal Financial FX Services

Simplify Your Personal Finances with Dunbridge Financial: Tuition Payments and International Transfers Made Easy Are you a parent with kids studying in a different country or an individual who needs to transfer money to an international account? Look no further than Dunbridge Financial's Personal Services. We are here to make your financial journey seamless and hassle-free, with a range of convenient options designed to meet your specific needs. Tuition Payments for Kids Studying Abroad Sending your kids to study in a different country is a proud moment, but managing their tuition payments shouldn't be a burden. With Dunbridge Financial, you can easily pay tuition fees for your children's education abroad, making sure they get the best opportunities without any financial worries. Transfer Money Internationally with Speed and Security Whether you're supporting family members overseas, investing in international ventures, or simply need to transfer money to an overseas account, Dunbridge Financial has you covered. We provide quick and secure international money transfers, ensuring your funds reach their destination promptly and safely. Experience Our Personal Services At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial needs. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is at the heart of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is paramount to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Simplify Your Personal Finances Don't let complicated international transactions hold you back. Join Dunbridge Financial today and experience a world of ease, convenience, and security. Whether you're making tuition payments for kids studying abroad or transferring money to an international account, we are here to make your financial journey a breeze. Simplify your personal finances with Dunbridge Financial. Sign up now and unlock a seamless, worry-free financial experience.

Service

Made to Order

Service

New

ISO

Air Freight


Hydrogen Solutions

Hydrogen

Unlocking the Power of Hydrogen with Lovat Gas Solutions Methane, the cleanest burning hydrocarbon, holds immense potential for fueling the future. By removing the carbon component, we are left with hydrogen, a clean and renewable source of power. Lovat Gas Solutions understands the transformative power of hydrogen and is here to assist you in realizing the full potential of this remarkable energy source. As a forward-thinking company, we recognize that hydrogen is the fuel of the future. When hydrogen is reacted in a fuel cell, it generates clean power, emitting only water vapor as a byproduct. This makes hydrogen a game-changer in the quest for sustainable and environmentally-friendly energy solutions. Our team of experts at Lovat Gas Solutions is well-versed in the hydrogen sector, equipped with over 80 years of combined experience in compressed gases. We have the knowledge, skills, and dedication to assist you in your hydrogen projects, no matter the scale or complexity. Whether you require hydrogen tube trailers to support fuel cell vehicle demonstrations or other hydrogen-related initiatives, our team is ready to provide the solutions you need. We understand the unique requirements of the hydrogen industry and can guide you through the process, ensuring seamless and efficient hydrogen supply for your projects. Why choose Lovat Gas Solutions for your mobile hydrogen supply needs? 1. Expertise in Compressed Gases: With our extensive experience in compressed gases, we possess a deep understanding of the technicalities and intricacies involved in hydrogen supply. Our team has specific expertise in the hydrogen sector, allowing us to provide tailored solutions for your unique requirements. 2. Commitment to Clean Energy: We share your passion for clean and sustainable energy solutions. By harnessing the power of hydrogen, we aim to contribute to a greener future. Let us assist you in leveraging the immense potential of hydrogen for your projects. 3. Reliable Support: Our team of experts is dedicated to providing reliable support throughout your hydrogen project. We are committed to understanding your specific needs and delivering comprehensive solutions that meet your objectives, ensuring a seamless and successful experience. 4. Collaborative Approach: At Lovat Gas Solutions, we value collaboration and partnership. We believe in working closely with our clients, understanding their goals and challenges, and developing tailored solutions that drive their success. Your satisfaction is our top priority. Embrace the future of clean energy with Lovat Gas Solutions. Contact our experts today to discuss your mobile hydrogen supply needs and how we can assist you in realizing the full potential of this transformative fuel. Together, let's power a sustainable future with hydrogen.

Buy

In Stock

Product & Service

New

ANSI

Land Freight


Wisdom Lamp 4A

Multi-purpose Headlamp

Provix in New Lowell

More information

Illuminate Your Adventures with the Wisdom Lamp 4A: The Ultimate Multi-Purpose Headlamp from Provix Provix is thrilled to introduce the Wisdom Lamp 4A, a versatile and powerful multi-purpose headlamp designed to meet a variety of lighting needs. Whether you're a professional in the mining industry or an outdoor enthusiast, the Lamp 4A is engineered to provide exceptional illumination and functionality. Powerful and Versatile Lighting Options The Lamp 4A features three brightness modes: High (HI), Medium (ME), and Low (LO), catering to different lighting requirements. With an impressive light luminous flux of 533 lm (HI), 265 lm (ME), and 50 lm (LO), and an initial lighting degree of 25,000 lx (HI), 12,000 lx (ME), and 1,800 lx (LO), this headlamp ensures clear visibility in various environments. Long-Lasting and Rechargeable Battery Equipped with a robust 7,000mAh battery and a rated voltage of 3.7V, the Lamp 4A provides continuous discharging times of 5 hours (HI), 13 hours (ME), and 60 hours (LO). The battery is rechargeable, offering up to 1,200 cycles in reasonable working conditions, making it both sustainable and reliable. Unique Feature: Charge Your Cellphone In addition to its lighting capabilities, the Lamp 4A can charge your cellphone, making it a handy tool for emergencies or outdoor activities. This unique feature, coupled with its USB charging ability and a quick 5-hour charging time, adds to its versatility and appeal. Built for Durability and Safety The Lamp 4A is designed with safety in mind. It is water-proof with an IP68 rating and includes a short circuit protection time of less than 320μs. Its durable design ensures it withstands harsh conditions, suitable for both professional and recreational use. Lightweight and Compact Design Weighing just 169g (5.96 oz) and with dimensions of 84x69x50mm (3.3x2.7x2.0in), the Lamp 4A is compact and comfortable to wear, making it ideal for extended use without causing fatigue. SOS Function for Emergency Situations An added SOS function makes the Lamp 4A a vital tool for emergency situations, providing an extra layer of safety during outdoor adventures or in hazardous work environments. Get Your Wisdom Lamp 4A Today The Wisdom Lamp 4A is available now at Provix, ready to light up your work and adventures with its exceptional features. . Experience the difference with the Lamp 4A – your reliable companion in lighting.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Multi-Process 5001 All-in-One Welder

Welding Machine

Canaweld: Your All-In-One Solution for Oil and Gas Welding When it comes to welding machines and accessories for the oil and gas industry, Canaweld stands out as a leading expert. Our multi-process welding machines are designed to cater to all your welding needs, providing a comprehensive range of capabilities to handle various welding processes with ease. From MIG welding to TIG welding, Stick welding to Flux Cored welding, our multi-process welders are the ultimate all-in-one solution for your welding projects. Unmatched Variety, Unbeatable Quality At Canaweld, we take pride in offering a wide range of multi-process welders to meet the diverse needs of the oil and gas industry. Our production lines include industrial heavy-duty multi-process welders, high-tech (programmable, LCD panel, Synergic, or pulse) multi-process welders, and portable multi-process welders. Whatever your welding requirements, we have the perfect welding machine to match your needs. Versatility to Handle Various Materials Our multi-process welders are engineered to tackle a wide range of materials commonly used in the oil and gas industry. From mild steel and stainless steel to aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys, our machines are equipped to handle it all. Professional-Grade Wire-Feeding Mechanisms We understand that a robust and reliable wire-feeding mechanism is crucial for seamless welding operations. That's why all our multi-process welders are equipped with professional, heavy-duty wire-feeding mechanisms to ensure smooth and consistent wire feed, reducing downtime and improving efficiency. Introducing the Multiprocess 5000: The Workhorse for Medium to Heavy-Duty Applications The Multiprocess 5000 is a powerful 400-Amps welding machine that takes welding to a whole new level. Capable of Stick welding, MIG welding, Flux cored welding, or TIG welding with a lift start, this robust and reliable workhorse is the perfect companion for all your medium to heavy-duty applications. Engineered for Tough Conditions Designed to withstand the harshest conditions, the Multiprocess 5000 is a true workhorse. Its heavy-duty, robust design ensures reliability, making it a dependable partner in the most demanding environments. Unparalleled Performance With high power at 100% duty cycle and tested in extreme temperatures of 104°F/40°C and 140°F/60°C, the Multiprocess 5000 delivers exceptional welding quality, precise arc striking, and a highly stable arc. Its fully encapsulated PCB protects against dust contamination, ensuring continuous performance even in challenging conditions. Optimal Welding Control The Multiprocess 5000 features automatic compensation for main power fluctuations within ± 20% and electronic continuous control of inductance, ensuring trouble-free welding and excellent CC/CV characteristics. Whether you're engaging in MIG/MAG, Flux-cored, or Stick welding (MMA), this machine offers exceptional welding characteristics. User-Friendly and Worry-Free Setting parameters is a breeze with the Multiprocess 5000's user-friendly design. It includes initial and final crater control for precise welding results and comes with a comprehensive 3-year warranty, giving you peace of mind and confidence in your investment. Choose Canaweld: Your Trusted Welding Partner Experience the power, versatility, and reliability of Canaweld's multi-process welding machines. From the oil and gas industry to various industrial applications, our welding solutions have been trusted by professionals worldwide. When it comes to welding machines and accessories, Canaweld is the name you can trust. Unlock the potential of your welding projects with Canaweld's cutting-edge technology and exceptional performance. Invest in a welding machine that delivers superior results and choose Canaweld for all your welding needs.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


HDI 1000P Pressure Gauge System

Pressure Gauge

Houston Digital Instruments (HDI) is proud to present the 1000P Pressure Gauge System, a versatile and dependable solution designed to meet your pressure measurement needs. Built on our 30-year field-proven platform, this intrinsically safe, solid-state electronic gauge is the go-to choice for applications requiring accurate readings, even in high vibration and rugged environments. Unmatched Readability and Durability: The 1000P Pressure Gauge System is engineered to deliver clear and reliable pressure readings, regardless of lighting conditions. Our innovative design ensures that the gauge remains easily readable, providing crucial information at the point of measurement. Whether you require a primary or secondary readout, the 1000P delivers consistent performance, making it the ideal choice for critical operations. Exceptional Accuracy and Range: At HDI, accuracy is our priority. The 1000P offers pressure ranges up to 20,000 psi, providing the versatility to meet a wide range of application requirements. With an accuracy of 0.50% of full scale, you can trust that your pressure measurements are precise and reliable. Benefit from our extensive experience as the 1000P has been successfully deployed in the field for over 10 years, proving its performance and durability. Designed for Efficiency and Ease of Use: We understand the importance of simplicity and convenience. The 1000P Pressure Gauge System is powered by batteries, eliminating the need for external power sources and ensuring hassle-free operation. The field repairable system minimizes downtime and reduces maintenance costs, allowing you to focus on your operations with confidence. A low battery indicator keeps you informed of the system's power status, ensuring uninterrupted performance when it matters most. Tailored to Your Application: The 1000P can be utilized in various applications with different connection types, providing flexibility and adaptability to meet your specific needs. Choose from 2" 1502, 2" 2002/2202, flanged, or nut connections, ensuring seamless integration with your existing systems. Our team of experts is ready to assist you in selecting the optimal configuration for your application, ensuring the best performance and compatibility. Quality You Can Trust: HDI is synonymous with safety, accuracy, reliability, and low maintenance. The 1000P Pressure Gauge System upholds these qualities, providing you with peace of mind and enabling efficient and effective pressure monitoring. We are committed to delivering products that withstand the test of time and provide consistent performance in demanding environments. Expand Your Measurement Capabilities: Upgrade your pressure measurement capabilities with the 1000P Pressure Gauge System. Benefit from its reliable performance, durability, and ease of use. Whether you require primary or secondary readouts, this gauge system is designed to meet your needs with unmatched accuracy and versatility. Contact Houston Digital Instruments today to discuss your specific application requirements. Our team of experts is ready to assist you in selecting the ideal solution for your pressure measurement needs. Trust HDI for excellence in measurement and monitoring solutions. Together, we'll achieve efficiency, safety, and success.

Buy

In Stock

Manufacturer

New

API

Air Freight


MIG/STICK 221 Welding Machine

Welder

Experience Unrivaled Power and Versatility with the MIG/STICK 221 Welding Machine When it comes to welding machines that blend power, portability, and versatility, the MIG/STICK 221 from Canaweld stands in a league of its own. As the most powerful welding machine in the MIG/STICK series, this exceptional unit is designed to handle the toughest welding tasks with ease, making it the go-to choice for welding professionals in the oil and gas industry. Powerful and Lightweight - The Perfect Combination The MIG/STICK 221 strikes the perfect balance between power and portability. With the ability to weld up to 3/8-inch steel in MIG or SMAW mode, this machine ensures a stable and reliable arc, allowing for precision in every weld. Its lightweight and portable design make it the ideal companion for light to medium-duty welding operations, whether in your garage, at home, or at your local auto body shop. Unmatched Features for Superior Performance At Canaweld, we believe in providing our customers with cutting-edge features that enhance their welding experience. The MIG/STICK 221 boasts an array of features that set it apart from the rest: • Wide range of welding amperage up to 220A, giving you the flexibility to handle various welding applications with ease. • High power output, with 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, ensuring consistent performance during demanding tasks. • Designed to withstand extreme environments, the MIG/STICK 221 is tested in temperatures of 104°F/40°C, guaranteeing reliable operation under challenging conditions. • Inverter power supply with excellent MIG and Stick welding qualities, providing smooth and precise welds. • Automatic compensation for main power fluctuations within ± 20%, ensuring a stable welding process. • Capability to use up to 165 feet (50 meters) of lead without any power loss at the weld, offering extended reach for your welding projects. • High-quality metal double drive roll system for accurate and consistent wire feed, preventing bird nesting and improving efficiency. • Welds steel and aluminum up to 3/8″ thick, allowing you to tackle a wide range of materials with ease. • Graduated knob for precise settings, giving you full control over your welding parameters. • Automatic regulation of wire speed using motor voltage feedback, providing an exceptionally steady arc with minimum splatter for high-quality welds. • Overheat prevention with a fan and thermal protection, ensuring the longevity of your welding machine. • Built-in polarity changeover feature for most common gas and gasless wires, enhancing welding flexibility. • Durable metal face panel for added protection and longevity. Elevate Your Welding Experience with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld leads the way with innovative technology and unmatched performance. The MIG/STICK 221 is a testament to our commitment to delivering excellence in every product we offer. Unlock the true potential of your welding operations with the MIG/STICK 221. Experience the power, precision, and reliability of Canaweld's welding solutions, and take your welding projects to new heights. Choose Canaweld for Your Welding Needs With a comprehensive 3-year warranty and a track record of delivering top-notch products, Canaweld is the name you can trust for all your welding requirements. Join the league of welding professionals who rely on the MIG/STICK 221 for exceptional results and unmatched performance. Upgrade your welding capabilities today with Canaweld's MIG/STICK 221. Invest in excellence and elevate your welding experience to a whole new level.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Manage Risks

Software Development

Eleks in Toronto

More information

ELEKS: Empowering Risk Management for a Secure Energy Future Navigate the complexities of the energy and utility sector with confidence, backed by ELEKS' custom software engineering expertise. Our specialized team can guide you in developing and implementing cutting-edge software solutions for power network monitoring and analysis, enabling you to effectively manage risks, address weaknesses, and predict potential challenges. Elevate Your Risk Management with ELEKS Energy Software Development: Embrace the power of advanced energy management software solutions that redefine the productivity, accessibility, safety, and sustainability of your business power system. Comprehensive Risk Assessment: With our software solutions, identify your power system's weak points swiftly and accurately. Effectively address network issues and predict potential risks, enabling you to take timely preventive measures. Custom Solutions Tailored to You: Collaborate with ELEKS to develop custom energy management software solutions designed to cater precisely to your risk management needs. Gain insights that empower you to make informed decisions. Why Choose ELEKS? Industry Expertise: ELEKS boasts a team of specialists with comprehensive experience in custom software engineering for the energy and utility sector. Trust us to understand and address your unique challenges. Predictive Insights: Stay ahead of potential risks with predictive analysis powered by our software solutions. Leverage insights to take preventive measures and ensure the stability of your power network. Cutting-Edge Technologies: Our solutions harness the latest technologies, including Cloud, IoT, blockchain, and more. Future-proof your risk management strategies with innovation at your fingertips. Empower a Secure Energy Future: In a dynamic industry where risks abound, ELEKS empowers you to manage uncertainties effectively. Secure your energy future with a proactive approach to risk assessment and mitigation. Join the Energy Resilience Revolution with ELEKS Embrace a future where risks are managed proactively and uncertainties are addressed with precision. ELEKS' energy software development solutions equip you with the tools needed to navigate the energy and utility sector confidently. It's time to lead the way towards a secure energy future – choose ELEKS as your partner in risk management and innovation.

Service

Made to Order

Product

New

ISO


Lanai Pro ROV

Subsea ROV

Everything You Need, and MORE POWER Are you ready to take your subsea exploration to the next level? Meet the Lanai Pro ROV, the epitome of power, performance, and cutting-edge technology. Built on the strong foundation of the Lanai, the Pro version elevates your underwater missions with its unparalleled capabilities. Engineered by ROV Operators for More Power At Poseidon Robotics, we understand the challenges that subsea operators face. That's why we designed the Lanai Pro with precision and expertise, ensuring it meets your most demanding requirements. Step into the world of More Power with the Lanai Pro ROV. The Ultimate Powerhouse The Lanai Pro ROV is built to handle higher currents, making it a true powerhouse for your subsea operations. Experience a whole new level of control and efficiency with the following enhanced features: • 2kW Power Supply: The Lanai Pro comes equipped with a robust 2kW power supply, providing ample energy for extended missions and the most demanding payloads. • Extra Video Input: With an additional HD video input, the Lanai Pro allows you to expand your visual capabilities, capturing every intricate detail of the underwater realm. • Integrated 22in HD Monitor: Experience real-time, crystal-clear visuals with the integrated 22in HD monitor right at your fingertips, seamlessly integrated into the Console. Mastering the Depths with Precision The Lanai Pro ROV is designed by ROV operators, ensuring it meets the specific needs of professionals like you. Embrace its rugged design and dive into depths up to 400m (optional 975m). Its compact dimensions of 559x356x305mm (LWH) allow for easy maneuverability in the most confined spaces. Payload Flexibility and Imaging Excellence Unleash your creativity with the Lanai Pro's increased payload space, accommodating imaging sonar, scanning sonar, altimeter, CTD, UT, and more without requiring a tool skid. The 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters ensure precise movements, enabling you to capture stunning visuals and data. Empowering Telemetry and Advanced Control The Lanai Pro boasts an Advanced Telemetry System, including 1x AUX Ethernet (10/100mbps) and 4x AUX RS485/RS232/RS422 interfaces. Two additional HD video inputs further enhance your visibility, while the power supply offers regulated 5/12/24VDC options. Pro Integrated Console - A Perfect Companion With the Lanai Pro Integrated Console, your control center becomes an oasis of efficiency. Operating at an output voltage of 350-420VDC and 2.2kW, the Console's Intel i5 with stable Linux UI ensures seamless operations and easy monitoring with its 22in HD sunlight-readable MINI monitor. Trust in Quality When you choose Lanai Pro ROV, you invest in quality and reliability. Rest assured with a 2-year warranty and a comprehensive standard equipment package that includes a 250m tether/spool, Newton grabber, console/pro controller, spares, and cases. Dive into Discovery with Lanai Pro ROV Experience the future of subsea exploration with the Lanai Pro ROV. Propel your missions to greater depths and efficiency. Contact us today to unleash the power of exploration with the Lanai Pro – Big Performance from Small ROVs.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Plug with Equalizing Prong and Valve Sub-Assembly

Downhole Tools

HOCA Oil Tools: Revolutionizing Downhole Operations with Plug with Equalizing Prong and Valve Sub-Assembly In the dynamic and demanding world of downhole operations within the oil and gas industry, the quest for innovation, efficiency, and safety is relentless. HOCA Oil Tools, a leading provider of specialized downhole slick line tools, meets this challenge head-on with our advanced Plug with Equalizing Prong and Valve Sub-Assembly. This tool is meticulously designed to enhance the functionality and safety of downhole operations, providing a solution that is both versatile and reliable. HOCA’s Plug with Equalizing Prong and Valve Sub-Assembly: Tailored for Optimal Performance Our Plug with Equalizing Prong and Valve Sub-Assembly is engineered for precision and durability, designed to address the complex needs of modern downhole activities. This innovative tool combines the functionality of a plug for secure sealing and isolation with the added advantage of an equalizing prong and valve mechanism. This integration allows for controlled pressure equalization, crucial in preventing potential downhole complications and ensuring the safety of the well and personnel. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Plug with Equalizing Prong and Valve Sub-Assembly means opting for a product that stands at the confluence of innovation, quality, and safety. We are committed to providing solutions that not only meet the current demands of the oil and gas industry but also anticipate future challenges, ensuring our clients are equipped for success. Integrating our advanced plug assembly into your downhole operations signifies a move towards enhanced efficiency, safety, and control. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your operational goals with cutting-edge solutions and comprehensive service. Select HOCA Oil Tools for your downhole needs and leverage the advantages of our Plug with Equalizing Prong and Valve Sub-Assembly to optimize your operational outcomes. Partner with us and step into a new era of downhole operations, where efficiency, safety, and performance are paramount. With HOCA Oil Tools, empower your downhole activities with tools that redefine industry standards and drive your success in the competitive oil and gas landscape.

Buy

In Stock

Product & Service

New

API

Air Freight


Internal Roll-on Connector for Coiled Tubing

IRC Coiled Tubing Tool

Introducing the Revolutionary IRC (Internal Roll-on Connector) by Marlin Oil Tools: Your Key to Efficient and Reliable Coiled Tubing Connections in the Oil and Gas Industry Marlin Oil Tools proudly presents the IRC (Internal Roll-on Connector), a cutting-edge solution engineered to enhance the efficiency and reliability of well intervention operations. Designed to seamlessly connect the smooth lower end of coiled tubing (CT) to any downhole tool, the IRC stands out for its innovative design and superior performance in the demanding environments of the oil and gas industry. Here's why the IRC is an essential tool for your well intervention operations. Key Features of the IRC (Internal Roll-on Connector): Innovative Groove Design: The IRC features unique grooves in its upper part, which are specifically designed for the secure fixing of coiled tubing through a rolling process. This design ensures a tight and reliable connection, crucial for the successful execution of well intervention tasks. Threaded Lower Part for Versatile Tool Attachment: Equipped with a threaded lower section, the IRC allows for easy and secure attachment of various downhole tools. This feature provides the versatility needed to adapt to different operational requirements, making the IRC a versatile tool in your well intervention toolkit. Enhanced Sealing with FKM 90 O-rings: To ensure the integrity of well operations, the IRC is fitted with two O-rings made from the high-quality FKM 90 material. This offers superior sealing capabilities, effectively isolating the connector's internal space from the annulus and preventing fluid leakage. Efficient Installation Process: The installation of the IRC is simplified and efficient, utilizing a mechanical tubing cutter with rolling wheels. This process not only ensures a secure connection but also minimizes downtime, allowing for quicker setup and transition between operations. Elevate your well intervention operations with the IRC (Internal Roll-on Connector) from Marlin Oil Tools, a leading innovator in coiled tubing technology for the oil and gas sector. Designed for the secure connection of coiled tubing to downhole tools, the IRC features a unique groove design for rolling fixation and a threaded lower part for versatile tool attachment. Equipped with dual O-rings made from durable FKM 90 material, it provides exceptional sealing, enhancing operational integrity. The IRC is engineered for easy installation, offering efficiency and reliability in well intervention tasks. Choose the IRC for a seamless, leak-proof connection in your coiled tubing operations. Why Choose the IRC from Marlin Oil Tools? Secure and Reliable Connection: The unique groove design ensures a robust connection between coiled tubing and downhole tools, critical for the success of well intervention operations. Operational Versatility: The threaded lower part enhances the IRC's compatibility with a wide range of downhole tools, offering operational flexibility. Superior Sealing Performance: Dual O-rings made from FKM 90 material provide outstanding sealing, protecting against fluid leakage and ensuring the safety of well operations. Streamlined Installation: Designed for efficiency, the IRC's installation process reduces operational downtime, enhancing productivity and operational flow. Marlin Oil Tools is dedicated to providing the oil and gas industry with innovative solutions like the IRC (Internal Roll-on Connector), designed to meet the rigorous demands of well intervention operations. Contact us today to discover how our advanced coiled tubing tools can optimize your operational efficiency and success.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Dunbridge Financial's Personal Services

Foreign Investment Management

Discover Seamless Financial Freedom with Dunbridge Financial's Personal Services Are you ready to take control of your international finances and experience a world of convenience and security? Look no further than Dunbridge Financial's Personal Services, designed to simplify your financial transactions and empower you to make the most out of your money. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. That's why our personal services offer live exchange rates with no hidden fees. What you see is what you get – ensuring that you get the most value for your money without any unpleasant surprises. Whether you're sending money overseas, paying bills in another country, or managing international investments, our live rates put you in control of your financial decisions. Security is Our Top Priority We understand that the safety of your funds and personal data is paramount. Rest assured, at Dunbridge Financial, your security is our top priority. Our payment service partners are compliant with ISO27001, a globally recognized standard for information security management systems. With this robust security framework in place, your client funds and data are managed safely and securely, giving you peace of mind with every transaction. Easy to Use, Easy to Save Simplicity and efficiency are at the core of our personal services. Dunbridge Financial's user-friendly platform allows you to send money to over 100 countries quickly and effortlessly. With just a few clicks, you can choose where and who you're sending money to, lock in your exchange rate, and you're done! Managing your international finances has never been this easy. Explore the World of Foreign Investment Management As part of our personal services, Dunbridge Financial offers a range of foreign investment management solutions to suit your needs: 1. Manage Your Investments Abroad Take full control of your investments in your home country while living abroad. With our seamless platform, you can easily monitor and manage your investment portfolio from anywhere in the world. 2. Offshore Investments Diversify your investment portfolio by exploring offshore opportunities. Our platform allows you to use various currencies to invest in international markets and broaden your financial horizons. 3. Mortgage Payments for Vacation Villas and Investment Properties Dreaming of owning a vacation villa or investment property in another country? Dunbridge Financial can help you pay your mortgage conveniently and securely, so you can turn your dream into a reality. 4. Payroll and Expenses in Your Preferred Currency Working abroad or receiving income from multiple countries? Our personal services enable you to receive your pay and manage your expenses in your currency of choice, minimizing exchange rate fluctuations and maximizing your financial control. Embrace a world of financial flexibility with Dunbridge Financial's Personal Services. Let us handle the complexities while you enjoy the simplicity and savings. Take charge of your international finances with confidence, knowing that our secure platform and transparent live rates have your best interests at heart. Unlock Financial Freedom Today Join Dunbridge Financial and explore a new realm of financial freedom. Sign up now to experience seamless transactions, secure fund management, and effortless foreign investment management. Your financial journey begins here, with Dunbridge Financial's Personal Services at your side.

Service

Made to Order

Service

New

ISO

Air Freight


Coiled Tubing Hydraulic Vibration Tool

HVT Coiled Tubing Tool

Introducing the HVT (Hydraulic Vibration Tool) from Marlin Oil Tools: Revolutionizing Well Intervention and Completion Operations Marlin Oil Tools is proud to present the HVT (Hydraulic Vibration Tool), an advanced downhole tool designed to significantly enhance the efficiency and reach of well intervention and completion operations. The HVT stands out for its ability to create controlled vibrations when liquid is pumped through it, reducing the friction coefficient across the Bottom Hole Assembly (BHA) and ensuring extended reach in long horizontal wells. Here’s a closer look at the HVT’s features, benefits, and why it’s an essential tool for your oil and gas operations. Key Features of the HVT (Hydraulic Vibration Tool): Friction Reduction: The HVT generates vibrations that significantly reduce the friction coefficient, facilitating smoother and longer reach of the BHA in horizontal wells. Versatile Application: With options for larger diameters, the HVT can also be utilized as part of the casing shoe, ensuring that the casing reaches the planned depth during well completions. Exceptional Durability: Engineered to withstand harsh downhole conditions, the HVT is resistant to nitrogen, acid, and hydrogen sulfide, offering unlimited working time in challenging environments. Compact and Efficient: The tool’s short length makes it an ideal choice for operations requiring high maneuverability and efficiency. Elevate your well intervention and completion processes with the HVT (Hydraulic Vibration Tool) from Marlin Oil Tools, a cutting-edge solution designed to overcome the challenges of extended reach in horizontal wells. By creating controlled vibrations, the HVT reduces friction, enhancing BHA maneuverability and ensuring casing is accurately placed during well completions. Its resistance to nitrogen, acid, and hydrogen sulfide guarantees reliability in even the most demanding environments, while its compact design promotes operational efficiency. Choose the HVT for unparalleled performance and durability in your oil and gas operations. Why Choose the HVT from Marlin Oil Tools? Enhanced Operational Reach: Maximizes the effectiveness of well interventions in horizontal sections. Increased Completion Success: Assists in achieving accurate casing placement for optimal well completions. Reliable in Harsh Conditions: Offers unmatched durability against nitrogen, acid, and hydrogen sulfide. Streamlined Design: Facilitates ease of use and integration into existing operations without extensive modifications. The HVT (Hydraulic Vibration Tool) by Marlin Oil Tools represents the forefront of innovation in downhole tool technology, providing operators with a powerful solution to enhance the reach and success of well interventions and completions. Incorporate the HVT into your toolkit to achieve operational excellence and maximize the potential of your oil and gas wells.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Drone Powered Visual Inspections

Software Development

Eleks in Toronto

More information

ELEKS: Empowering Energy Excellence through Automated Drone-Powered Inspections In the dynamic world of energy, innovation is the driving force behind success. ELEKS stands at the forefront of this innovation, leveraging our unparalleled energy sector technology expertise to revolutionize the way you manage your assets, commercial buildings, and industrial facilities. Imagine a future where automated drone-powered inspections redefine efficiency, dramatically reducing costs, assessment time, and workplace hazards, all while making a significant contribution to lowering carbon emissions. Our approach integrates cutting-edge technology with precision, creating custom solutions that redefine the limits of what's possible. Here's how ELEKS can be your partner in achieving operational excellence. 1. Efficient Inspections, Reduced Costs: With automated drone-powered inspections, the cost-efficiency of your operations skyrockets. Manual inspections involve substantial expenses, but our technology-driven approach slashes costs while enhancing accuracy. 2. Swift Assessment: Time is of the essence in the energy sector. Our solutions redefine assessment timelines, making inspections at least ten times faster than traditional human-based methods. 3. Workplace Safety Revolution: Workplace hazards are a critical concern. By utilizing automated drones, you eliminate the risks associated with manual inspections, creating a safer work environment for your teams. 4. Carbon Emission Reduction: In an era focused on sustainability, carbon emissions reduction is a priority. Our automated inspections not only streamline operations but also contribute to lowering carbon emissions, showcasing your commitment to a greener future. 5. High-Precision Imagery: Augmented with high-precision cameras, our fully automated aerial vehicles (UAVs) capture high-resolution images with sub-millimeter accuracy. This level of precision empowers you with detailed insights for informed decision-making. 6. Versatile Operational Environment: Our automated drones operate effectively even in GPS-denied environments. This adaptability ensures that you can collect valuable data, regardless of the setting. 7. Data-Powered AI and ML: The data collected from automated inspections becomes a goldmine for AI and machine learning solutions. Our technology empowers you to leverage insights, enhancing risk management and operational efficiency. ELEKS: Transforming Energy Operations ELEKS doesn't just offer services – we offer transformation. Our energy sector technology expertise isn't just about solutions; it's about redefining industry standards. The convergence of cutting-edge technology, precision, and sustainability underpins our approach. Join us in reshaping the future of energy operations, where innovation meets efficiency, safety is paramount, and sustainability is more than a buzzword. With ELEKS by your side, you're not just embracing technology – you're embracing a journey towards operational excellence. Step into a world where automated drone-powered inspections become the cornerstone of efficient, safe, and sustainable energy management.

Service

Made to Order

Service

New

ISO


Tubing Swage

Downhole Tools

Unlock Efficiency in Oilfield Operations with HOCA Oil Tools’ Tubing Swages In the dynamic world of oilfield services, precision and reliability are non-negotiable. At HOCA Oil Tools, we understand the critical nature of downhole operations. That’s why we're proud to present our premium Tubing Swages – Type A and Type C – designed to meet and exceed the challenging demands of downhole slick line tools applications. Revolutionize Downhole Challenges with Tubing Swages Our Tubing Swages are engineered for excellence, ensuring your downhole operations are seamless and efficient. The Type A and Type C Tubing Swages are crafted with the highest quality materials, ensuring durability and long-lasting performance in the harshest environments. Type A Tubing Swage: This variant is meticulously designed to re-expand constricted tubing, ensuring a free passage for wireline tools and sub-surface controls. Its tapered ends facilitate easy navigation through tubing, while the central hole and lateral ports allow fluid bypass, optimizing performance. Type C Tubing Swage: Building on the features of Type A, the Type C Tubing Swage includes an additional box connection at the bottom, enhancing its functionality and application range. This feature ensures greater versatility, meeting diverse operational needs with ease. Six Benefits of Using HOCA’s Tubing Swages: Enhanced Productivity: By rectifying constrictions in the tubing, our swages ensure smooth operations, significantly reducing downtime and boosting productivity. Versatility: Available in various sizes, the Tubing Swages cater to a wide range of tubing diameters, ensuring the right fit for your specific operational needs. Durability: Crafted with high-quality materials, our swages withstand the challenging downhole environment, offering long-term reliability and reducing the need for frequent replacements. Efficient Design: The tapered design and fluid bypass capability ensure minimal resistance during operations, enhancing efficiency and effectiveness. Cost-Effective: By maintaining the integrity of your downhole tools and minimizing operational delays, our Tubing Swages prove to be a cost-effective solution in the long run. Safety: Designed with safety in mind, our swages help prevent accidents and equipment damage, ensuring a safer working environment. Transform Your Operations with HOCA Oil Tools At HOCA Oil Tools, we're committed to providing solutions that drive success. Our Tubing Swages are a testament to our commitment to quality, efficiency, and safety. Embrace the change with HOCA’s Tubing Swages and experience unparalleled downhole operational excellence.

Buy

In Stock

Product & Service

New

API

Air Freight


Long Haul Link Repairs

Unveiling Nulux's Robust Solution for Maintaining the Lifeblood of Your Operations: Long Haul Link Repairs In the vigorous and demanding milieu of the Oil and Gas industry, the stakes are astronomically high and the margin for error is strikingly slender. Here, communication is more than just a transfer of data; it’s the unerring lifeline that ensures smooth, synchronized, and secure operations. Introducing Nulux Network Solutions' pivotal service in the realm of Long Haul Link Repairs, ensuring that the veins of communication within your expansive operations remain unimpeded and robust, even in the face of unpredicted adversities. Embarking on a Journey of Resilient Connectivity Nulux Network Solutions, a harbinger of stellar products, solutions, and services throughout the entire energy value chain, strides with a commitment of not only delivering unparalleled network solutions but also aiding our customers in forging a path toward a more sustainable future. Long haul fiber optic links, spanning vast terrains, often traversing through some of the most inhospitable environments, form the critical backbone of communication networks in the Oil and Gas industry. Their impeccable functioning is non-negotiable, ensuring that every fragment of data from remote operational sites is conveyed precisely, securely, and without latency to where it is indispensably required. Nulux’s Long Haul Link Repair: A Vigilant Guardian of Your Communication Networks Our long haul link repair service is not merely a reactive solution to the unexpected impediments that might assail your fiber optic communications but a strategic, anticipatory shield that ensures your operations remain perpetually connected and resilient. In electing Nulux’s Long Haul Link Repair Service, you fortify your operations with: Proactive Vigilance: Monitoring and maintaining the integrity of your long haul links to predict and preemptively address potential issues before they escalate into critical failures. Rapid Response and Resolution: Ensuring that, in the event of disruptions, our team mobilizes with expeditious proficiency to diagnose, locate, and repair faults, reinstating the vitality of your communication backbone. End-to-End Expertise: Nulux’s veteran technicians, equipped with over two decades of combined experience and nuanced understanding of the challenges peculiar to the oil and gas sector, facilitate meticulous, rapid, and robust repair solutions. Comprehensive Aftercare: Post-repair, we ensure your links are not merely restored but optimized, and provide comprehensive reports and aftercare to preclude future occurrences and enhance overall network performance. Steadfast Communications with Nulux Your long haul links do more than just convey data; they ensure the heartbeat of your operations remains rhythmic and unerring. Nulux stands as a sentinel, ensuring these critical lifelines are perpetually robust, secure, and operational, safeguarding not merely your data but the seamless synchronicity of your extensive operations. Engage with Nulux Network Solutions, and let’s construct a future where your communications are not merely sustained but are resilient, where every byte of data traverses through your networks with unerring precision, and where every long haul link is more than a conduit, but a steadfast, unbreakable bond that perpetuates your operational excellence.

Service

In Stock

Service

New

ISO


Casing Patch Stackable System - STX-SPAN

Stackable Casing Patch

Introducing the new multi-trip stackable STX-SPAN version from ID OILTOOLS! This cutting-edge system is the perfect solution for isolating longer intervals in flowing or static wells. With the ability to be deployed on wire line, slick line, coil tubing or conventional tubing, the STX-SPAN is versatile and can be used in a variety of applications. The STX-SPAN is also ideal for wells with limited rig up height and on wells that have severe dog legs where only short sections will pass. Each section seals to the previous one via a ratchet latch stinger and seal bore receptacle, making it easy to use and efficient. Our stackable X-SPAN products allow for long straddle systems to be deployed in multiple runs, making it perfect for when lubricator length or well accessibility is an issue. With the ability to isolate the top and bottom of the intended zone using X-SPAN or GTX-SPAN elements, this technology allows for extremely long isolation systems to be deployed. Additionally, specially engineered seal assemblies are utilized between each sequential intermediate section for added reliability. The STX-SPAN can incorporate standard off-the-shelf customer supplied tubulars as straddle base pipe material, and can incorporate sand screens, slotted liner, flow control devices such as profile nipples and sliding sleeves. It is also rated for high pressure and high temperature applications, making it perfect for a variety of environments. So, if you're looking for a versatile, reliable, and easy-to-use system for isolating longer intervals in your wells, look no further than the STX-SPAN from ID OILTOOLS! Contact our Tech Services department for assistance and more information on this game-changing product.

Buy

In Stock

Product & Service

New

API

Sea Freight


Explosive Cutter

Accelerating Well Recovery with InWaTec Combined's Explosive Cutter Services In the demanding field of oil and gas extraction, time is a resource just as precious as the commodities we extract. For operations facing the challenge of stuck pipe, rapid and decisive action is paramount. InWaTec Combined’s Explosive Cutter Services offer a swift and effective solution to sever tubing and expedite the removal of obstructions, ensuring operational continuity and minimizing costly downtime. Stuck pipe scenarios are not just inconvenient—they are costly disruptions that can jeopardize the integrity of the well and escalate operational expenses. Our Tubing/Drill Pipe Cutters are designed to address these incidents with unmatched efficiency. When tubing becomes immovable, our cutters are deployed to deliver a clean, precise cut, allowing for the quick retrieval of the stuck sections. The selection of the cutter is a critical decision, and our technical experts are adept at determining the optimal diameter that can navigate the wellbore and deliver maximum performance. The largest possible cutter that the well can accommodate is used, ensuring that the cut is complete and that the well integrity is maintained throughout the operation. InWaTec Combined’s cutter technology is a blend of high-grade materials and explosive precision, a formula that guarantees a cut above the rest. Our cutters are not merely tools; they are the bearers of efficiency and effectiveness, embodying our commitment to providing solutions that keep your operations on track. Safety is paramount in all our explosive cutting operations. We rigorously adhere to the highest safety standards, ensuring that every cutter deployment is conducted with the utmost regard for the well's structural integrity and the surrounding environment. Our clients can rest assured that our Explosive Cutter Services are not only effective but are executed with an unyielding commitment to safety protocols. Choosing InWaTec Combined's Explosive Cutter Services means opting for a partner who understands the urgency and intricacies of well recovery. We bring expertise, precision, and reliability to the fore, ensuring that even in the face of challenging stuck pipe situations, your operations can swiftly resume. Let us bring our cutting-edge solutions to your wellsite, and together, we can overcome the obstacles that stand in the way of productivity and progress.

Service

In Stock

Service

New

API

Land Freight


Gas Tight Casing Patch GTX-SPAN

GTX-SPAN

Looking for a heavy-duty, permanent solution for sealing splits, holes or perforations in your tubing and casing? Look no further than the GTX-SPAN System Tubing/Casing Patch from ID OILTOOLS! Our GTX-SPAN System is the first effective gas tight patch on the market, thanks to the premium sealing elements in each component. Each element contains two elastomer seals, providing superior gas shut off capabilities. The GTX-SPAN System is incredibly versatile, and can be run on electric wireline, tubing, or coil tubing, and set with a pressure setting tool (electrical, mechanical, or hydraulic). The large bores ensure easy passage of tools and equipment, minimizing restriction to fluid flow. Customizable for most well applications, including premium alloys, restrictions, and geothermal well applications, our GTX-SPAN System Tubing/Casing Patch is the solution you need for your sealing needs. Our system consists of three basic components: a top metal element with an expandable elastomer seal, a tubular extension, and a bottom metal element with an expandable elastomer seal. Various patch lengths can be obtained by adding tubular extensions, making it a modular and versatile solution for any well. During the setting process, the pressure setting tool exerts a pushing force on the top tapered metal swage and a pulling force on the bottom tapered metal swage. Both swages are driven into the metal sealing elements (with expandable elastomer seals), which expand outward into the casing wall, providing both a metal-to-metal and an elastomer seal. At a predetermined force, a calibrated weak point shears, and the setting process ceases. A collapsible setting collet located in the bottom swage retracts and allows the setting equipment to be retrieved. The interval is now fully isolated with metal and expandable elastomer seals. ID OILTOOLS highly recommends the use of a casing scraper before patch installation to rid the interval of foreign matter and the use of a casing caliper to provide an accurate record of casing I.D. and conditions. A gauge ring or drift run is a minimum requirement. Choose the GTX-SPAN System Tubing/Casing Patch from ID OILTOOLS for the first effective gas tight patch on the market. Contact us today to learn more!

Buy

In Stock

Product & Service

New

API

Sea Freight


5 inch K Storm Choke

Ambient 5 inch SSSV

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Air Freight


Welding Cable Double Insulated AWG 4

Welding Cable

Introducing Canaweld's Double Insulated Welding Cable - The Ultimate Powerhouse for Your Welding Needs! When it comes to welding, having the right equipment is crucial for achieving superior results and ensuring safety. At Canaweld, we take pride in crafting high-quality welding accessories designed to meet the rigorous demands of the oil and gas industry. Our Welding Cable Double Insulated AWG 4 (21.2 mm2) is a game-changer that will elevate your welding experience to new heights. Uncompromising Quality: Our welding cables are meticulously engineered to deliver unmatched performance and reliability. Crafted from 100% pure copper, these premium welding cables boast a Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172. This construction ensures optimal conductivity, allowing for seamless power transfer during your welding operations. Safety First: At Canaweld, we prioritize safety above all else. That's why our welding cables are double insulated, offering enhanced protection and peace of mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, you can trust our cables to handle the toughest welding tasks with ease. Built to Withstand the Toughest Conditions: We understand that welding environments can be harsh and demanding. That's why our welding cables are engineered to be highly resistant to cuts, tears, and abrasions. They are designed to withstand exposure to oil, solvents, and chemicals, ensuring their durability and longevity even in the most challenging workspaces. Unmatched Flexibility: Work with ease and efficiency using our flexible welding cables. With a minimum bending radius of 4 times the cable diameter, our cables offer excellent maneuverability, allowing you to navigate through tight spaces and challenging welding positions effortlessly. Compliant with Environmental Standards: At Canaweld, we are committed to environmental responsibility. Our welding cables are RoHS compliant, ensuring they adhere to strict environmental standards and are free from harmful substances. Elevate Your Welding Performance: Upgrade your welding setup with Canaweld's Double Insulated Welding Cable AWG 4 (21.2 mm2) and experience the pinnacle of welding excellence. Trust in Canaweld's expertise to deliver top-of-the-line welding accessories that enhance safety, productivity, and performance. With Canaweld by your side, you can confidently take on any welding project in the oil and gas industry. Invest in the best for your welding endeavors - choose Canaweld.

Buy

In Stock

Manufacturer

New

ASTM

Land Freight


7 inch K Storm Choke

Ambient Pressure SSSV 7

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


Renewable Natural Gas (RNG) Virtual Pipeline

Biogas Transport

Efficient RNG Transport Solutions: Trust Lovat Gas Solutions If you have Renewable Natural Gas (RNG) that needs to be transported from Point A to Point B, Lovat Gas Solutions is here to provide you with comprehensive and efficient logistical solutions. With our expertise in RNG transport, we can devise a tailor-designed plan that perfectly suits your project's requirements, covering every aspect from compression to trucking and decompression facilities. Renewable Natural Gas (RNG) has emerged as a vital component in the transition towards sustainable energy. It offers the dual benefits of reducing greenhouse gas emissions and providing a clean, renewable source of energy. At Lovat Gas Solutions, we understand the importance of RNG and its role in creating a greener future. That's why we are dedicated to providing top-notch RNG transport services to ensure the smooth and efficient movement of RNG from its source to sales. When you partner with Lovat Gas Solutions, you can expect: 1. Tailor-Designed Logistical Plan: We recognize that each RNG transport project is unique, with its own specific requirements. Our experienced team will work closely with you to understand the details of your project and devise a logistical plan that is perfectly tailored to your needs. From compression to trucking and decompression facilities, we cover every step of the process. 2. Comprehensive Service: Our commitment to excellence extends to every aspect of RNG transport. We offer a full range of services, including compression facilities to prepare the RNG for transport, efficient trucking solutions to transport the RNG safely and reliably, and decompression facilities at the destination to ensure the gas is ready for distribution or utilization. 3. Expertise and Experience: With years of experience in the industry, our team has the knowledge and expertise required to handle RNG transport projects of all sizes. We stay up-to-date with the latest advancements in RNG technology and transportation, ensuring that we provide you with the most efficient and effective solutions available. 4. Commitment to Sustainability: At Lovat Gas Solutions, sustainability is at the core of everything we do. We understand the importance of reducing carbon emissions and creating a greener future. By providing RNG transport solutions, we contribute to the utilization of renewable energy sources and help our clients achieve their sustainability goals. When it comes to RNG transport, trust Lovat Gas Solutions to deliver exceptional service, reliability, and efficiency. Contact us today to discuss your project and let us devise a tailor-designed logistical plan that meets your specific requirements. Together, let's move towards a more sustainable future with efficient RNG transport solutions from Lovat Gas Solutions.

Service

In Stock

Product & Service

New

ANSI

Land Freight


TIG Torch 200 AMP Gas Valve Air Cooled (26 series)

TIG Torch

Unleash Precision Welding with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series)! For the oil and gas industry, precision welding is not just a requirement; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our TIG Torch 200 AMP Gas Valve Air Cooled (26 Series) is a testament to our commitment to excellence and innovation. Unmatched Flexibility: When it comes to hard-to-reach applications, our TIG Torch 200 AMP is the ultimate solution. The torch body can be bent to virtually any position, ensuring quick and easy access to even the most difficult positional welds. No more struggling with tight spaces; our torch provides unmatched flexibility, making precision welding a breeze. Revolutionary Cooling Technology: We've harnessed the power of Force Cooling Technology to maximize the performance and longevity of our torch. Highly effective passages and wells force cool the collet, resulting in a cooler running torch with increased conductivity and extended consumable life. Weld with confidence, knowing that our torch can handle even the most demanding applications. Heat Zone Isolation for Superior Performance: Our torch employs Heat Zone Isolation Technology, where transferred heat is isolated by a unique external barrier. Conducted heat is further isolated using large air pockets within the torch body structure. The result? Cooler running torches with increased power to weight performance ratios. Experience welding at elevated power levels without compromising performance. Superior Wear Parts for Increased Arc Time: Every component of our torch is designed for superior performance, delivering increased arc time and lower overall production costs. From push-on/easy grip ceramics to one-piece collet/collet body for hassle-free use, our torch ensures 100% ceramic and electrode alignment with the Heat Zone Isolator. Optional large gas lens increases the gas envelope for even more efficiency. Advanced Torch Bodies and Back Caps: Experience a step-change in performance levels with our torch bodies and back caps. Our revolutionary cooling and heat zone isolation techniques result in cooler running torch bodies at elevated power levels. These cooler running components increase wear parts' life expectancy, giving you an edge in productivity. Key Benefits for Enhanced Performance: • Utilizes air gap technology for cooler running handles • Hard and soft material elements for an effortless grip • Infinite adjustment of welding parameters from the torch handle • Optional integrated handle readout displays all welding and machine parameters in "real-time" Clever Cable Systems for Optimal Efficiency: Our cable systems are cleverly designed to combine flexibility, durability, and top-notch performance. Rapid fit and modular rear-end systems ensure easy reconfiguration of power input, gas hose, and control lead terminations. Superior-grade rubbers guarantee cable termination integrity and hose package longevity, tested to withstand over 1 million flexes. Elevate Your Welding Experience: Experience the difference with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series). Achieve precision welding with ease, no matter how challenging the application. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers. When it comes to welding, choose Canaweld for the ultimate in quality, flexibility, and performance. Elevate your welding experience and take your oil and gas projects to new heights of success with Canaweld's cutting-edge welding accessories.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Coiled Tubing Hydraulic Setting Tool

SST Hydraulic Setting Tool

Introducing the SST Hydraulic Setting Tool from Marlin Oil Tools: The Ultimate Mechanical Solution for Downhole Equipment Setting Marlin Oil Tools is proud to present the SST Hydraulic Setting Tool, a fully mechanical downhole tool engineered to revolutionize the setting of bridge plugs and cement retainers within the well casing. Designed for versatility, the SST can be deployed via coil tubing or traditional tubing, making it a crucial component for enhancing well integrity and operational efficiency in oil and gas interventions. Key Features of the SST Hydraulic Setting Tool: Versatile Application: Compatible with both coil tubing and traditional tubing, offering flexible deployment options for various well intervention scenarios. Mechanical Activation: Utilizes a simple yet effective mechanical activation process, where a ball landing in the piston initiates the setting mechanism. Precise Setting Capability: Provides accurate and reliable setting of bridge plugs and cement retainers, crucial for wellbore stability and integrity. High-Pressure Performance: Engineered to withstand the shear pressure required to move the piston and secure the downhole equipment in place. Optimized for Well Interventions: Enhances the efficiency and safety of well interventions by ensuring the precise placement of downhole tools. Ease of Operation: The straightforward mechanical design ensures ease of use, minimizing potential operational complications. Elevate your well intervention and completion processes with the SST Hydraulic Setting Tool from Marlin Oil Tools, a premier mechanical solution designed for the oil and gas industry. This innovative tool simplifies the setting of bridge plugs and cement retainers, ensuring optimal well casing integrity. Compatible with both coil tubing and traditional tubing, the SST offers unparalleled versatility and reliability. With its mechanical activation mechanism and high-pressure performance, the SST Hydraulic Setting Tool is essential for achieving precise downhole equipment placement, enhancing operational efficiency and well integrity. Choose the SST for a streamlined, effective approach to well interventions. Why Choose the SST Hydraulic Setting Tool from Marlin Oil Tools? Flexible Deployment Options: Ensures compatibility with various intervention methods, increasing tool utility. Reliable Mechanical Activation: Simplifies the setting process, reducing the risk of operational errors. Precision in Downhole Settings: Guarantees the accurate placement of bridge plugs and cement retainers for improved well performance. Durability Under Pressure: Built to endure the rigorous conditions of downhole operations, offering lasting performance. The SST Hydraulic Setting Tool by Marlin Oil Tools represents the cutting edge in downhole mechanical solutions, providing operators with a powerful tool for enhancing well completion and intervention outcomes. Incorporate the SST into your operations to ensure efficient, accurate, and reliable downhole equipment setting.

Buy

Made to Order

Manufacturer

New

API

Land Freight


HDI M100 Pressure Gauge

Electronic Pressure Gauge

At Houston Digital Instruments (HDI), we are committed to providing cutting-edge measurement solutions to our customers. While we have replaced the HDI M100 Pressure Gauge with our latest innovation, the HDI 2000P, we understand that there are still existing installations of the M100 in the field. That's why we continue to offer parts and services to ensure ongoing support for your equipment. Reliable Performance in a Compact Design: The HDI M100 Pressure Gauge, though discontinued, has left a lasting legacy of dependable performance. This battery-powered gauge features a solid-state platform with no fluids or moving parts, providing accurate pressure measurements in a compact and robust package. With pressure ranges of 6,000 psi, 10,000 psi, and 16,000 psi, you can select the configuration that suits your specific needs. Field Repairable and Battery Powered: The M100 Pressure Gauge is designed for easy maintenance and minimal downtime. If repairs are ever needed, our field repairable system ensures that you can quickly address any issues and keep your operations running smoothly. The low battery indicator keeps you informed of the gauge's power status, allowing for timely battery replacements and uninterrupted monitoring. Versatile Connectivity Options: We understand that different applications require different connection types. The M100 offers various connection options, including 2" Male NPT, 2" 1502, 2" 2202, or flanged connections. This flexibility allows you to seamlessly integrate the gauge into your existing setup. Additionally, the M100 provides 4-20mA or 0-1 volt output options, enabling compatibility with your preferred data acquisition systems. Enhanced Visibility and Durability: In demanding environments where vibrations are present, the M100 Pressure Gauge demonstrates consistent performance. Its solid-state design ensures resistance to high vibration environments, ensuring accurate and reliable pressure readings. The analog bar graph with a divided scale provides clear and intuitive visualization, even in challenging conditions. Future-Proof Your Measurement Solutions: While the HDI M100 Pressure Gauge may have reached the end of its production cycle, we are excited to introduce its successor, the HDI 2000P. This advanced pressure gauge system offers enhanced features, improved accuracy, and expanded configuration options. Our dedicated team is ready to assist you in transitioning to the HDI 2000P, providing a seamless upgrade to your pressure measurement capabilities. Continued Support for Existing Installations: We understand the importance of maintaining and servicing existing equipment. Even though the M100 Pressure Gauge is no longer in production, we are committed to supporting our customers who rely on this legacy product. Our comprehensive parts inventory and expert technicians ensure that you can access the necessary resources to keep your M100 Pressure Gauge operational. For any inquiries, parts, or service requests related to the HDI M100 Pressure Gauge, please reach out to our dedicated support team. We are here to assist you in maximizing the lifespan and performance of your equipment. Houston Digital Instruments remains dedicated to providing innovative, reliable, and future-proof measurement solutions. Trust us to deliver excellence in measurement technology, ensuring your continued success in a dynamic industry.

Service

Tempory Sold Out

Service

New

API

Air Freight


Laser cutting tools Leasing

Advance Your Manufacturing with Laser Cutting Tool Leasing from CWB National Leasing Elevating Precision and Efficiency in Your Operations with Strategic Leasing Solutions For businesses in manufacturing, engineering, or design, laser cutting tools are indispensable for precision cutting and fabrication. Leasing laser cutting tools through Canadian Western Bank (CWB) National Leasing offers a flexible, financially savvy solution for businesses aiming to enhance their manufacturing capabilities. Here’s how leasing laser cutting tools can revolutionize your operational processes: 1. Rapid Equipment Access CWB National Leasing values the pace of your business operations and offers a quick leasing process. Decisions are typically made within 48 hours of your application, ensuring fast notification to your equipment dealer. This efficiency means your laser cutting tools can be delivered and operational quickly, minimizing downtime and boosting productivity. 2. Enhanced Financial Flexibility Leasing laser cutting tools with CWB National Leasing increases your buying power. Opting for periodic payments over a large upfront purchase helps free up capital for other critical aspects of your business. Furthermore, the option to add extra features or accessories to your laser cutting tools for a small payment increase allows for customization to meet specific operational needs. 3. Effective Cash Flow Management With manageable lease payments spread over the term, your laser cutting tools begin contributing to your business’s revenue while still being paid off. This balanced financial strategy is key in maintaining a healthy expense-to-revenue ratio, essential for business growth and sustainability. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Advantages Leasing laser cutting tools can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease laser cutting tools through CWB National Leasing is a strategic decision that empowers your business with advanced manufacturing equipment while maintaining financial agility. It ensures access to state-of-the-art laser cutting technology, vital for precision and efficiency in production, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational capabilities, increased production capacity, and greater profitability, helping your business to excel in the competitive manufacturing industry.

Service

In Stock

Service

New

ISO


Storm Choke 2-1/2 inch H

Ambient Valve

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


Equipped Containers

Shipping Container Offices

Introducing Sivam's modified shipping containers - the perfect solution for anyone in need of a portable, efficient, and reliable office space that stands out from the crowd! Our secure modular offices are not your average office space - they're built from durable shipping containers that are modified to suit your needs. Whether you're looking for a portable site office or a unique office space that sets your business apart, Sivam's modified shipping containers are the perfect choice. Thanks to their portable design, our shipping container offices can be easily moved from site to site, giving you the flexibility to set up your office wherever you need it. And with our commitment to efficiency, you can trust that our offices are designed to maximize productivity and minimize wasted space. But don't let their unique design fool you - our shipping container offices are also incredibly secure. We understand the importance of protecting your valuable assets, which is why we build our offices to the highest security standards, giving you peace of mind that your equipment and documents are safe and secure. At Sivam, we pride ourselves on our commitment to quality and customer satisfaction. That's why we work closely with our clients to design and build offices that meet their exact needs, ensuring that every detail is taken care of. So if you're in need of a portable, efficient, and reliable office space that sets your business apart, choose Sivam's modified shipping containers. Contact us today to learn more about how we can help you take your business to the next level!

Buy

In Stock

Manufacturer

New

ISO

Sea Freight


Pipeline Pipe Inventory and Inspection Tracking

PipeDNA is a cloud-based pipe management solution

Streamlining Pipeline Pipe Inventory and Inspection Tracking with PipeDNA: Enhancing Efficiency in the Oil and Gas Industry Efficient management of pipeline pipe inventory and inspection tracking is crucial for the smooth operation of the oil and gas industry. Introducing PipeDNA, a state-of-the-art cloud-based platform designed to streamline the management of pipe and tube throughout the entire supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage pipeline pipe inventory, increase visibility, and optimize inspection processes. Comprehensive Inventory and Tracking: PipeDNA provides a comprehensive inventory management and tracking system for pipelines, enabling stakeholders to have a real-time view of their pipeline assets. From monitoring utilization and activity to analyzing trends, the platform equips stakeholders with valuable insights to make informed decisions about their pipeline pipe inventory. With enhanced visibility, stakeholders can optimize inventory levels, minimize downtime, and maximize resource utilization. Efficient Logistics Management: Managing the logistics of pipelines can be complex, but PipeDNA simplifies the process by offering robust logistics management features. Stakeholders can efficiently handle shipments, track the status of pipeline pipe in transit, and streamline documentation processes. Additionally, the platform facilitates pipe bundling, ensuring efficient grouping and transportation of pipeline pipe, leading to cost savings and improved operational efficiency. Streamlined Inspection Management: PipeDNA's inspection management capabilities extend to pipelines, allowing stakeholders to effectively manage inspection jobs across multiple sites. The platform enables seamless coordination, tracking of job statuses, and management of inspection profiles. By centralizing inspection data and streamlining workflows, PipeDNA optimizes the inspection process, ensuring compliance with industry standards and mitigating risks associated with pipeline integrity. Enhanced Identification and Traceability: PipeDNA's identification and traceability features enable quick and reliable identification of pipeline pipe, providing comprehensive details, activity history, and traceability documentation. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, facilitating easy tracking and identification of individual pipelines. By enhancing identification and traceability, PipeDNA strengthens quality control measures, streamlines recalls if necessary, and supports compliance with industry regulations. Seamless Integration of Manufacturing Data: PipeDNA seamlessly integrates manufacturing data into its platform, eliminating the need for manual data entry and reducing the risk of human errors. This integration ensures that pipeline-related data, including manufacturing details, is readily available within the system. By automating the transfer of manufacturing data, PipeDNA enables stakeholders to maintain accurate and reliable records, facilitating efficient pipeline pipe management and data-driven decision-making. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's popular and emerging technologies to optimize pipeline pipe inventory and inspection tracking. The platform supports barcoding and labeling systems, integrating popular barcode standards such as UPC, EAN, and QR codes. Additionally, PipeDNA is RFID ready, enabling stakeholders to seamlessly integrate RFID technologies such as labels and asset tags for efficient tracking and management of pipelines. Furthermore, the platform supports IoT data integrations using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced pipeline pipe management processes. PipeDNA revolutionizes pipeline pipe inventory and inspection tracking in the oil and gas industry, providing stakeholders with a powerful cloud-based solution. By offering comprehensive inventory and tracking capabilities, efficient logistics management, streamlined inspection processes, enhanced identification and traceability, and seamless integration of manufacturing data, PipeDNA empowers stakeholders to maximize efficiency and productivity. Embrace PipeDNA and experience the benefits of improved pipeline pipe management, increased visibility, and optimized operations in the oil and gas supply chain.

Service

Currently in Use

Service

New

ASME

Air Freight


Coffee machines Leasing

Elevate Your Business Ambiance with Coffee Machine Leasing from CWB National Leasing Brewing Success with Advanced and Cost-Effective Beverage Solutions For businesses in the hospitality sector, offices, or any setting where offering a quality coffee experience is essential, having a top-notch coffee machine can significantly enhance customer satisfaction and employee morale. Leasing coffee machines through Canadian Western Bank (CWB) National Leasing presents a flexible, economical, and practical solution for businesses looking to upgrade their beverage services. Here’s how leasing coffee machines can benefit your business: 1. Swift Access to High-Quality Coffee Machines CWB National Leasing values the importance of enhancing your business ambiance and offers a rapid leasing process. With decisions typically made within 48 hours of application submission, your coffee machines can be delivered and operational quickly. This efficiency means you can start offering premium coffee experiences without significant delay, enhancing your customer service and workplace environment. 2. Enhanced Financial Power Leasing coffee machines with CWB National Leasing boosts your financial flexibility. It allows you to spread costs over manageable periodic payments rather than making a large upfront investment, freeing up capital for other key business needs. The option to add extra features or accessories to your coffee machines for a small payment increase allows for customization to meet your specific service requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your coffee machines start contributing to your business’s ambiance and productivity while being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing coffee machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease coffee machines through CWB National Leasing is a strategic decision that equips your business with essential beverage equipment while maintaining financial agility. It ensures access to state-of-the-art coffee machines, vital for delivering high-quality coffee experiences, without the financial burden of a large upfront investment. This leasing approach enables enhanced customer satisfaction, improved employee well-being, and increased overall appeal of your business setting.

Service

In Stock

Service

New

ISO


Partnered with Xerox

Cybersecurity

ALCiT in Mississauga

More information

Elevate Your Workflow with ALCiT's Xerox Partnership In the intricate world of document management and workflow optimization, one name stands as an icon of innovation: Xerox. A Fortune 500 company with over 8,500 active patents, Xerox represents the pinnacle of security and efficiency. ALCiT is excited to team up with Xerox to bring you robust and secure workflow solutions that reshape productivity as you know it. Xerox: Catalyst of Productivity A name synonymous with pioneering breakthroughs, Xerox holds a distinguished place in the realm of business and government. ALCiT's partnership with Xerox opens doors to an array of transformative solutions that not only boost productivity but also redefine how you work. Reimagining Your Workflow: Unveiled Simplified Internal Processes: Through automation tailored to your company's unique needs, internal processes become seamless. Efficiency skyrockets as mundane tasks give way to strategic thinking. Accessible and Searchable Content: Xerox empowers you to harness your content's full potential. From printing and scanning to archiving and backup, your content becomes not just accessible but also effortlessly searchable. Secure Document Workflow: With encryption and authentication at its core, Xerox ensures that your document workflow is not just efficient but also fortified against security breaches. Anytime, Anywhere Connectivity: Xerox extends your reach. From mobile options to secure document sharing, Xerox bridges geographical gaps and fuels collaboration. Experience Xerox's Power with ALCiT Productivity Amplification: Xerox's solutions aren't just tools; they're productivity catalysts. ALCiT's expertise ensures that these solutions align perfectly with your needs. Tailored Precision: Your needs are unique, and so are Xerox's solutions under ALCiT's guidance. Customization becomes the cornerstone of your improved workflow. Experience Transformation: Xerox doesn't just optimize workflows; it transforms how you experience work. Efficiency meets empowerment in a seamless blend. Redesign Your Workflow Today ALCiT's partnership with Xerox isn't just a collaboration; it's a transformational journey.

Service

Made to Order

Service

New

ISO


Tubing Retrievable SCSSSV 3-1/2 inch SP

TR-SCSSSV SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Circulating Type Blanking Plugs for Nipples

Downhole Tools

HOCA Oil Tools: Enhancing Well Integrity with Circulating Type Blanking Plugs for Nipples In the intricate world of oil and gas extraction, maintaining well integrity while ensuring operational efficiency is paramount. HOCA Oil Tools, a leader in providing innovative downhole slick line tools, introduces its Circulating Type Blanking Plugs for Nipples, designed to meet and exceed these essential industry requirements. Tailored for seamless integration with landing nipples in wellbores, our products stand as a testament to our commitment to quality, efficiency, and safety in downhole operations. HOCA's Circulating Type Blanking Plugs for Nipples: Engineered for Superior Performance Our Circulating Type Blanking Plugs are meticulously designed to offer robust sealing and pressure control capabilities within the wellbore. These tools are essential for operators looking to manage fluid movement, conduct pressure tests, and maintain well integrity during various stages of well operations. Constructed from high-grade materials and engineered to meet the rigors of the downhole environment, our blanking plugs ensure reliability, durability, and performance. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Circulating Type Blanking Plugs for Nipples means selecting a solution that embodies innovation, operational excellence, and reliability. Our commitment to delivering high-quality downhole solutions ensures that our products not only meet but surpass the challenges faced in modern oilfield environments. By incorporating our Circulating Type Blanking Plugs into your downhole operations, you take a step towards enhanced well integrity, safety, and operational efficiency. With HOCA Oil Tools, you gain not just a supplier but a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Blanking Plugs for Nipples. Partner with us, and elevate your downhole operations to new levels of success and efficiency. With HOCA Oil Tools, enhance your downhole activities with tools that set new industry standards for reliability, safety, and performance in the competitive world of oil and gas extraction.

Buy

In Stock

Product & Service

New

API

Air Freight


Plasma Cut 45 D

Plasma Cutter

Introducing the Plasma CUT45 D: Your Ultimate Portable Cutting Powerhouse! At Canaweld, we understand the need for quick and precise cuts in the field or at the shop. That's why we proudly present the Plasma CUT45 D - a powerful and portable plasma cutting machine designed to meet all your cutting demands with unparalleled efficiency. Cut Like a Pro The Plasma CUT45 D is engineered to deliver clean cuts in steel up to 5/8-inch (15mm) thick, while its sever cutting capability extends up to an impressive 0.8-inch (20mm) thickness. Say goodbye to tedious cutting processes and hello to swift, accurate results! Powerful and Portable Don't let its compact size fool you! This plasma cutting machine is packed with power, making it the perfect companion for welding tasks on the go. Its lightweight design ensures easy transportation, giving you the freedom to move seamlessly between work sites. Dual Voltage Capability Adaptability is key, and the Plasma CUT45 D has it covered. With dual voltage capability, this cutting equipment can be used with a generator or in the shop, providing ultimate flexibility and convenience for any job. Precision and Performance Welders who demand quick cuts with precision will be impressed by the Plasma CUT45 D. Its advanced technology and expert craftsmanship guarantee the accuracy and quality of every cut you make, giving you the confidence to take on any cutting challenge. Unleash Your Potential Empower yourself with the Plasma CUT45 D and experience the freedom of quick, precise cuts at your fingertips. Whether you're working on a construction site or handling oil and gas projects, this plasma cutting machine will be your go-to tool for cutting excellence. Canaweld - Your Partner in Cutting Excellence At Canaweld, we take pride in providing high-quality welding machines and accessories for the oil and gas industry. The Plasma CUT45 D is a testament to our commitment to excellence and innovation. With its cutting-edge technology, power, and portability, this cutting machine is a must-have for welders and fabricators alike. Take control of your cutting tasks like never before. Embrace the power of the Plasma CUT45 D and elevate your welding and cutting projects to new heights of precision and efficiency. Canaweld - Empowering Your Welding Success!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Coiled Tubing Cement Mill

CEM, Cement Mill

Introducing the CEM Cement Mill from Marlin Oil Tools: The Premier Solution for Efficient Wellbore Milling Operations Marlin Oil Tools proudly presents the CEM Cement Mill, a state-of-the-art milling tool designed to optimize cement mill-out operations and tackle various downhole obstacles in oil and gas wells. Engineered for versatility and efficiency, the CEM Cement Mill is capable of grinding and washing out any object within the well that is softer than the mill's cutters, ranging from intentionally placed equipment like bridge plugs to inadvertently lost tools. Key Features of the CEM Cement Mill: Optimized for Cement Removal: Specifically designed to excel in cement mill-out operations, ensuring a clean and clear wellbore for subsequent interventions. Broad Milling Applications: Capable of milling a wide array of downhole obstacles, providing flexibility across well intervention tasks. Effective Debris Management: Equipped with multiple flushing holes, the CEM Cement Mill facilitates the circulation of drilling fluid, which efficiently removes milled particles and cools the cutting edge. Superior Cutting Technology: Features durable carbide inserts welded inside the mill body, offering exceptional grinding performance and longevity. Cooling and Lubrication: The circulation of drilling fluid not only removes debris but also prevents overheating, extending the life of the carbide inserts. Redress Services: Marlin Oil Tools offers comprehensive redress services for worn carbide inserts, ensuring your CEM Cement Mill remains at peak performance. Elevate your well intervention and milling operations with the CEM Cement Mill from Marlin Oil Tools, a leading-edge solution designed for unparalleled efficiency in cement mill-out and obstacle removal in the oil and gas industry. With its advanced design, the CEM Cement Mill tackles downhole challenges with ease, ensuring operational success. Whether you're dealing with cement, bridge plugs, or lost equipment, the CEM Cement Mill's carbide inserts and flushing holes ensure effective milling and debris removal, enhancing wellbore integrity and facilitating subsequent operations. Opt for Marlin Oil Tools' CEM Cement Mill for your milling needs and experience the difference in precision, efficiency, and durability. Why Choose the CEM Cement Mill from Marlin Oil Tools? Versatile Milling Solution: Offers a versatile tool for a wide range of downhole milling challenges. Enhanced Operational Efficiency: Designed to maximize milling efficiency and minimize downtime. Durable and Reliable: Built with high-quality materials and carbide inserts for prolonged service life. Comprehensive Support: Backed by Marlin Oil Tools' expert redress services, ensuring your tool is always in optimal condition. The CEM Cement Mill by Marlin Oil Tools represents the forefront of downhole milling technology, providing oil and gas operators with a reliable, efficient, and versatile tool for enhancing well intervention outcomes. Incorporate the CEM Cement Mill into your operations for smoother, more effective wellbore preparation and obstacle management.

Buy

Made to Order

Manufacturer

New

API

Land Freight


12 unit Locking FAST charger rack

Miner's Cap Lamp Charging Station

Provix in New Lowell

More information

Secure and Efficient Charging with the CSA 12 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 12 Unit Locking FAST Charger Rack (Part # NWI-NWCR-12BLC), a compact yet powerful charging solution designed for the efficient management of mining and industrial lighting equipment. This charger rack combines fast charging capability with enhanced security, making it an ideal choice for smaller teams or tight spaces. Fast Charging for Essential Equipment Designed to keep pace with the demanding schedules of modern mining and industrial operations, the CSA charger rack offers rapid charging times of 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This quick turnaround ensures your equipment is ready to go when you are, reducing downtime and boosting productivity. Locking Feature for Added Security One of the key advantages of the CSA 12 Unit Charger Rack is its locking mechanism. This feature provides added security for your valuable equipment, ensuring it remains safe and secure while charging. Ideal for locations where additional protection is desired, the locking rack is a safeguard against unauthorized access or removal of the equipment. Compact Design for Space Efficiency The compact size of the CSA 12 Unit Charger Rack is perfect for operations where space is at a premium. It’s designed to be single-sided, making it easy to place in equipment rooms, workshops, or mobile units, maximizing space utility without compromising on charging capacity. Durable and Reliable Built to withstand the harsh environments typical of mining and industrial settings, the CSA charger rack is durable and reliable. Its robust construction guarantees long-term performance, representing a smart investment for operations focused on efficiency and security. Ideal for Smaller Teams or Limited Spaces This charging solution is particularly well-suited for smaller mining crews, construction teams, or rental fleets. It allows for the management of multiple devices without needing a large amount of space, making it a versatile choice for various operational sizes and types. Upgrade Your Charging Station Today The Wisdom CSA 12 Unit Locking FAST Charger Rack is available now at Provix. Enhance your equipment management with this efficient, secure, and space-saving solution. Visit www.provix.net to learn more and bring advanced charging capabilities to your operation.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


OilHungry oil absorbent big pad

Oil absorbent big pad

OilHungry in Stoney Creek

More information

Oil absorbent pads are designed to selectively absorb oil-based liquids while repelling water. They are commonly used in various industries, including automotive, marine, and manufacturing, to clean up and control oil spills or leaks. These pads are crucial for preventing environmental contamination and ensuring workplace safety. The size of oil absorbent pads can vary, and this specific product, Oil Absorbent big pad 22" x 23", is designed with dimensions of 22 inches by 23 inches. This size is suitable for addressing larger spills or leaks. It works very well and easy, when oil leaks occur, simply place the absorbent pad in the affected area to efficiently clean up and contain the spilled oil. And After use, follow proper disposal guidelines, on the packaging. The primary purpose of OilHungry Oil Absorbent pad is to effectively clean up oil spills. Whether it's a minor leak or a more substantial oil spill in an engine, the absorbent pad is designed to capture and contain the oil, preventing it from spreading further. Leaking oil can happen with every boat or vessel. And oil leaks pose a significant threat to the environment. The absorbent pad helps mitigate this threat by quickly and efficiently absorbing the leaked oil. This proactive approach protects water bodies, preventing the oil from contaminating rivers, lakes, or oceans. Having an Oil Absorbent big pad (22" x 23) is a valuable tool to address and solve challenges related to leaks in engines. the absorbent pad offers a targeted and effective solution for managing oil spills in various industrial and marine settings. Having the Oil Absorbent big pad prepared in your boat, is the same as having a plan for unexpected leaks.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


FXE 2-7/8 inch Wireline Retrievable Surface Controlled Subsurface Safety Valve

WR-SCSSSV FXE

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


ET-30 Single Stage Steam Turbine

Single Stage Turbine

Experience Unmatched Efficiency with Kessels ET-30 Single Stage Steam Turbine: Your Powerhouse for Precision In the world of industrial steam turbines, precision, reliability, and efficiency are non-negotiable. Kessels Steam Turbines is proud to introduce the ET-30 Single Stage Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Single Stage Steam Turbines Our Single Stage Steam Turbines are the embodiment of economy and reliability, serving as mechanical drives for Pumps, Fans, Knives, Compressors, and Generators. Over the past two decades, our engineering team has tirelessly reviewed customer and consultant requirements, meticulously addressing queries while adhering to the stringent standards of API 611 and 612. Unmatched Performance, Even at Low Pressure Kessels Steam Turbines have earned their stripes across diverse industries, renowned for their exceptional performance even under challenging low-pressure conditions. With over 15 frame sizes and design options, we offer Single Stage Steam Turbines capable of handling steam conditions and applications up to a staggering 4,000 HP in single-stage configurations. Industries Served Our Single Stage Steam Turbines find their utility across a spectrum of industries, including Oil and Gas, Food Processing, Chemical Processing, Pharmaceutical, Steel, Paper, Sugar, Palm Oil, Marine, Edible Oil, Rice, and Fertilizer. Versatility in Applications Kessels ET-30 Single Stage Steam Turbines can be seamlessly integrated into an array of applications, including Pump Drives, Fan Drives, Mill Drives, Generator Drives, Compressor Drives, Knives, and Shredder Drives. Power Capabilities Our turbines boast power capabilities ranging from 100 HP (75 kW) to a formidable 4,000 HP (3000KW), with speeds of up to 17,000 RPM. They can operate efficiently under pressures of up to 65 Kg/cm2 (925 Psig) and temperatures reaching 460°C (860°F). Design Versatility With seven distinct models, including Horizontal (axial and radial split), Vertical, API 611- and 612-compliant, Overhung, and between-the-bearings wheel designs, our turbines offer a range of options to suit your specific needs. Choose between metallic or carbon seals, Electronic/Hydraulic Mechanical governors, customized steam path components, Mechanical/Electronic safety trip systems, and Direct-Drive or integral gearboxes with suitable lubrication systems. Choose Kessels for Unrivaled Excellence Choosing Kessels Steam Turbines is a commitment to excellence, innovation, and reliability. Our ET-30 Single Stage Steam Turbine exemplifies these principles, offering you: Unmatched Efficiency: Harness the power of steam with unmatched efficiency, maximizing productivity while minimizing waste. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbines ensure uninterrupted operations even in the most demanding industrial environments. Application Versatility: Adapt effortlessly to your unique requirements, confident that Kessels' expertise has you covered. Empower Your Future with Kessels In the competitive landscape of industrial steam turbines, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels ET-30 Single Stage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Slickline Collar Stop

Downhole Tools

Elevate Well Integrity and Control with HOCA Oil Tools' Collar Stop In the complex realm of downhole operations, maintaining control and integrity within the wellbore is not just a goal—it’s a necessity. HOCA Oil Tools, a leader in downhole slick line tools, introduces the Collar Stop, a pivotal component designed to optimize downhole operations and ensure the utmost well integrity. Our commitment to innovation, quality, and reliability shines through in this essential tool, tailored to meet the demanding needs of modern oil and gas extraction. HOCA’s Collar Stop: Ensuring Unparalleled Downhole Control and Integrity The Collar Stop by HOCA Oil Tools is engineered for precision, durability, and versatility. Designed to lock securely into the collar recess of tubing, our Collar Stop provides an essential anchoring point for downhole tools and operations. Fabricated with top-grade materials and subjected to rigorous testing, the HOCA Collar Stop stands as a testament to our dedication to excellence, providing reliable performance in the most challenging downhole environments. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are committed to providing the oil and gas industry with downhole solutions that transcend conventional limitations. Our Collar Stop is a prime example of this commitment, embodying our dedication to safety, efficiency, and innovation. Incorporating the HOCA Collar Stop into your downhole toolkit not only elevates operational control and well integrity but also aligns your operations with the highest standards of quality and performance. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner committed to your success, offering cutting-edge solutions and unparalleled support. Choose HOCA Oil Tools’ Collar Stop for your downhole operations and join the ranks of satisfied customers who rely on our tools to secure their success. Elevate your well operations with HOCA Oil Tools – where innovation meets integrity.

Buy

In Stock

Product & Service

New

API

Air Freight


Solvable Bridge Plug

SBP Solvable Bridge Plug

Introducing the SBP Solvable Bridge Plug from Marlin Oil Tools: A Revolutionary Approach to Temporary Well Barrier Solutions Marlin Oil Tools is proud to unveil the SBP Solvable Bridge Plug, an innovative downhole tool designed for the efficient and environmentally friendly isolation of oil and gas wells. Engineered with state-of-the-art materials that fully dissolve in downhole conditions, the SBP offers a temporary barrier solution that simplifies well intervention processes and enhances operational efficiency. Key Features of the SBP Solvable Bridge Plug: Eco-Friendly Dissolution: Designed to completely dissolve over time, the SBP eliminates the need for mechanical removal, reducing environmental impact and operational costs. Efficient Well Isolation: The plug is set using a hydraulic Setting Tool (STT), ensuring a quick and secure installation to create a reliable temporary barrier and isolate underlying intervals. Fully Soluble Materials: Constructed from entirely soluble materials for both collets and the sealing element, ensuring that the plug will fully disintegrate without leaving residue. Field-Proven Reliability: The effectiveness and reliability of the SBP Solvable Bridge Plug have been rigorously tested and confirmed through extensive field work, offering peace of mind in its performance. Optimized for Oil and Gas Wells: Specifically tailored for use in oil and gas wells, the SBP is an ideal solution for operators seeking to enhance well management and operational flexibility. Streamlined Operations: By dissolving directly in the well, the SBP streamlines the workflow, eliminating the need for follow-up interventions for plug removal. Maximize your operational efficiency and environmental stewardship with the SBP Solvable Bridge Plug from Marlin Oil Tools, a leading-edge solution engineered for temporary well isolation in the oil and gas industry. Utilizing fully soluble materials that dissolve in downhole conditions, the SBP offers a reliable, cost-effective, and eco-friendly alternative to traditional bridge plugs. Set with a hydraulic Setting Tool (STT), this plug is designed to create an effective barrier and then dissolve, simplifying well interventions and eliminating the need for mechanical removal. Choose the SBP Solvable Bridge Plug for its field-proven reliability, operational efficiency, and commitment to environmental sustainability. Why Choose the SBP Solvable Bridge Plug from Marlin Oil Tools? Sustainable Well Management: Provides an environmentally friendly solution that reduces the ecological footprint of well operations. Cost-Effective Operations: Eliminates the expense and time associated with traditional plug removal, enhancing operational efficiency. Reliable Temporary Isolation: Ensures secure and effective temporary well isolation, supporting a wide range of intervention tasks. Proven in Field Applications: Backed by rigorous field testing, the SBP offers reliability and peace of mind for operators. The SBP Solvable Bridge Plug by Marlin Oil Tools represents the cutting edge in downhole tool technology, providing oil and gas operators with a smart, sustainable, and efficient solution for well isolation. Incorporate the SBP into your operations to benefit from its innovative design, operational excellence, and environmental benefits.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Depthstar SCSSSV 4.5 inch

SCSSSV

The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Milling machines Leasing

Advance Your Manufacturing Capabilities with Milling Machine Leasing from CWB National Leasing Transforming Your Production Processes with Flexible and Efficient Equipment Solutions In the manufacturing, metalworking, and engineering sectors, milling machines are indispensable for precise material shaping and fabrication. Leasing milling machines through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their production capabilities. Here’s how leasing milling machines can benefit your business: 1. Quick Access to Advanced Manufacturing Equipment CWB National Leasing understands the importance of maintaining an efficient production line. They offer a swift leasing process, typically providing decisions within 48 hours of application submission. This ensures that your milling machines can be delivered and operational quickly, minimizing downtime and enhancing your manufacturing efficiency. 2. Enhanced Financial Flexibility Leasing milling machines with CWB National Leasing boosts your buying power. It enables you to free up capital by opting for manageable periodic payments instead of a large upfront purchase. The option to add extra features or accessories to your milling machines for a small payment increase allows for customization to meet specific production requirements. 3. Effective Cash Flow Management Smaller lease payments over the term mean your milling machines start contributing to your business’s revenue while they're being paid off. This approach helps maintain a healthy balance between expenses and income, crucial for the financial stability and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing milling machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease milling machines through CWB National Leasing is a strategic decision that equips your business with essential manufacturing equipment while maintaining financial agility. It ensures access to high-quality milling machines, vital for precise and efficient production, without the financial strain.

Service

In Stock

Service

New

ISO


TIG AC/DC 301 Pulse Welding Machine

Welder

Discover Precision Welding with the TIG AC/DC 301 Pulse! At Canaweld, we take pride in providing welding solutions that are powerful, intelligent, and reliable. The TIG AC/DC 301 Pulse is no exception – a welding machine that exemplifies precision and performance. Designed to meet the diverse needs of professionals in the oil and gas industry, this welding powerhouse offers unparalleled versatility and ease of use. Versatile Welding Capabilities The TIG AC/DC 301 Pulse is a welding marvel, capable of both AC and DC TIG welding, including stainless, mild steel, and aluminum, as well as Stick welding. Whatever the application, our advanced TIG welding parameters enable you to fine-tune the welding process, delivering exceptional results every time. From intricate welding tasks to heavy-duty projects, the AC/DC 301 Pulse rises to the occasion, giving you the flexibility to tackle any welding challenge. Power Meets Intelligence Built with intelligence and efficiency in mind, the AC/DC 301 Pulse features digital control of all welding parameters. This intuitive interface empowers you to tailor the welding settings precisely to your needs, ensuring flawless welds with ease. Additionally, the easy-to-use pulse mode, complete with the "easy-pulse" function, simplifies your welding experience, providing maximum control over your welds. Durable and Portable Design Designed for the rigors of the oil and gas industry, the TIG AC/DC 301 Pulse boasts a compact and innovative design. The shock-proof fiber compound front panel and control panel protection safeguard the machine against accidental impact, ensuring long-lasting performance even in challenging environments. The robust handle integrated into the chassis makes it easy to carry, offering mobility and convenience when moving between welding tasks. Efficient and Reliable Performance With a high duty cycle, the AC/DC 301 Pulse proves to be a workhorse, perfect for production TIG welders who demand the best all day, every day. Its exceptional TIG welding characteristics, paired with automatic compensation for power fluctuations, guarantee consistent and reliable performance in every weld. Unmatched Control and Customization Take control of your welding with the TIG AC/DC 301 Pulse. Special TIG torches enable remote control of welding parameters directly from the torch, giving you the flexibility to fine-tune your welds while working. Furthermore, optional software customization offers added features and tailored settings, enhancing your welding experience even further. Experience the Canaweld Advantage As with all Canaweld products, the TIG AC/DC 301 Pulse is backed by our commitment to quality and customer satisfaction. We stand by the durability and reliability of our welding machines, offering a comprehensive 3-year warranty for your peace of mind. Elevate your welding capabilities with the TIG AC/DC 301 Pulse. Discover precision welding like never before and let Canaweld be your partner in achieving excellence in every weld. Embrace the power of intelligence with the TIG AC/DC 301 Pulse - Welding Perfected!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Become Cybersecure

Cybersecurity

ALCiT in Mississauga

More information

Unlock a Safer Tomorrow with ALCiT's Become Cybersecure Accelerator In today's digital landscape, the quest for cybersecurity has never been more crucial. As businesses of all sizes become more interconnected, the potential risks from cyber threats are multiplying exponentially. The time has come for organizations to fortify their defenses, safeguard their data, and ensure a robust backup plan against the unforeseen. This is where ALCiT's cutting-edge solutions step in. Embrace Cybersecurity as a Continuous Journey The reality is clear: cyber threats are omnipresent. From small startups to multinational corporations, no one is immune. The question is not whether an incident will occur, but when. At ALCiT, we champion a proactive approach. We believe that becoming cybersecure is not just a destination but an ongoing journey towards resilience and preparedness. Why Choose to Be Cybersecure? Protection Beyond Boundaries: ALCiT understands that your devices, data, and vulnerabilities can emerge from any corner of your digital landscape. Our solutions create an ironclad shield, ensuring that every nook and cranny of your organization is fortified against cyber threats. Proactive Excellence: Reactive measures in the face of cyber attacks often result in more damage. Choose to be proactive. With ALCiT's expert guidance, you'll be equipped to detect and mitigate threats before they strike, minimizing potential losses. Strategic Advantage: In a competitive world, those who stay ahead thrive. ALCiT's cybersecurity solutions offer you an edge. By fortifying your defenses, you can focus on innovation, growth, and delivering exceptional value to your customers without the constant fear of a breach. Introducing the Become Cybersecure Accelerator ALCiT understands that embarking on the cybersecurity journey can be daunting. To catalyze your efforts, we've crafted the Become Cybersecure Accelerator. This accelerator program is designed to jumpstart your path towards a fortified digital environment, providing you with a clear roadmap, the latest tools, and the expertise of our seasoned cybersecurity professionals. Secure Today, Flourish Tomorrow Don't let cyber threats hinder your progress. Secure your digital assets and data today with ALCiT's Become Cybersecure Accelerator. Whether you're a startup, a growing enterprise, or an established corporation, our solutions are tailored to suit your needs, ensuring that your journey towards cybersecurity is seamless, effective, and future-proof. Join the ranks of proactive, forward-thinking organizations that have chosen to become cybersecure. The time to act is now.

Service

Made to Order

Service

New

ISO


Shifting Tools for Downhole Tools

Downhole Tools

Streamline Your Downhole Operations with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the constantly evolving oil and gas industry, having the right tools for specific downhole tasks can significantly enhance operational efficiency and safety. HOCA Oil Tools specializes in providing such solutions, and our Internal Fishing Neck Pulling Tools are a prime example. These tools are meticulously engineered for the safe and efficient retrieval of downhole equipment, ensuring operations proceed smoothly without unnecessary downtime or risk. HOCA's Internal Fishing Neck Pulling Tools: Engineered for Precision and Reliability Designed to latch onto internal fishing necks of downhole tools and equipment, HOCA Oil Tools' Internal Fishing Neck Pulling Tools offer unmatched precision and reliability. These tools are integral for the retrieval process, providing a secure grip without damaging the wellbore or the equipment being retrieved. Constructed from high-quality materials and designed to meet rigorous industry standards, our pulling tools ensure successful operations under a variety of downhole conditions. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means opting for a blend of quality, innovation, and support designed to meet the specific needs of modern downhole operations. Our commitment to excellence ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your downhole operations translates into enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to your success, offering cutting-edge solutions and unparalleled service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Internal Fishing Neck Pulling Tools for their critical operations. Elevate your downhole performance with HOCA Oil Tools – where technology, innovation, and reliability converge to drive success.

Buy

In Stock

Product & Service

New

API

Air Freight


Continuous RD-Long 13’

Regular Duty Chicksan Restraint

Introducing Safe-T-Whip™ Continuous RD-Long 13’ (SW-RD-02-L): Unparalleled Safety and Reliability for Longer Restraint Applications At Safe-T-Whip & Restraints Inc., safety is at the core of everything we do. We are thrilled to introduce our latest innovation - the SW-RD-02-L Safe-T-Whip™ Continuous RD-Long. Designed specifically for regular duty applications that require a longer restraint, this safety whip offers unmatched protection and reliability for pressurized pipe fittings in the oilfield. Dependable Regular Duty Design: Identified by its eye-catching yellow color and complemented by a yellow tag, SW-RD-02-L Safe-T-Whip™ Continuous RD-Long is meticulously crafted from robust 1/2" 12-Strand HMPE fiber. This reliable safety restraint is engineered for use on 2-inch 1502 hammer union pipelines up to an impressive 15,000psi or 3-inch iron up to 10,000psi. When you need a longer restraint without compromising on safety, trust Safe-T-Whip™ Continuous RD-Long to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous RD-Long is an integral part of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, minimizing dangerous impacts. Engineered for Maximum Security: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, as well as swivels and joints. Each section is secured by both the upstream and downstream sections of the flowline in the event of failure. However, it is essential to evaluate the piping system to ensure adequate anchoring both upstream and downstream for optimum safety. Certified for Excellence: Safety is our priority, and that's why all Safe-T-Whip™ Restraints and Anchors are thoroughly tested and certified to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatile and Effective: The Safe-T-Whip™ Continuous RD-Long is a variation of restraint designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. This versatility allows you to tailor your safety configuration to your specific needs, ensuring the highest level of protection for your operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous RD-Long is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous RD-Long, you can rest assured that your operations are protected from catastrophic failures. Invest in Unparalleled Safety: SW-RD-02-L Safe-T-Whip™ Continuous RD-Long is the ultimate safety restraint for longer applications. Trust in the power of Safe-T-Whip™ to safeguard your workforce, equipment, and operations. With Safe-T-Whip & Restraints Inc., safety is always at the forefront. Secure your Safe-T-Whip™ Continuous RD-Long today.

Buy

In Stock

Product & Service

New

API

Air Freight


Halliburton SP 7 inch TR-SCSSSV

SCSSSV SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Custom Application Development Services

Software Development

Eleks in Toronto

More information

Unleash Innovation and Elevate Your Business with ELEKS' Custom Application Development Services In today's dynamic business landscape, having a cutting-edge software solution that caters to your unique needs is no longer a luxury – it's a strategic necessity. ELEKS, a leader in the software engineering industry, offers a comprehensive suite of custom application development services that empower you to bring your boldest software visions to life. Our end-to-end approach ensures that your business stays ahead of the curve, delivering an exceptional user experience that sets you apart from the competition. Transforming Visions into Reality: How We Can Help You At ELEKS, we understand that every software vision is unique. Our custom application development service is designed to assist you in every step of your journey, from idea inception to implementation. Here's how we'll make a difference for you: 1. Validating Your Vision We kick-start your application development process with product design workshops that help shape your concepts and validate your ideas through data-led product design. Our Proof of Concept (PoC) development enables you to explore and invest in ideas that hold real business value, ensuring that your efforts are directed towards solutions with a high potential for success. 2. Innovating and Competing Innovation is at the heart of what we do. Our dedicated Research and Development (R&D) team is adept at crafting strategic solutions for even the most complex custom application development projects. Leveraging innovative technologies, we ensure that your products are tailor-made for rapidly evolving markets, giving you a competitive edge. 3. Maximizing Efficiency Automation is the key to releasing resources for delivering superior service. Once we've defined your application development requirements, we take full responsibility for the delivery team and project implementation. This allows you to concentrate on your core business activities while we handle the technical intricacies. 4. Accelerating Delivery Meeting demanding deadlines is crucial. Our nearshore team of software experts is here to assist you in cost-effectively achieving your goals, surpassing what in-house development alone can offer. With decades of experience and a proven delivery framework, we ensure consistency and minimize bottlenecks, enabling faster project delivery. 5. Ensuring Future-Proofing Future-proofing is paramount in the tech world. We establish a continuous integration/delivery process that lets you seamlessly check and deliver code changes across multiple platforms. This approach not only enhances your software ecosystem but also allows you to provide an exceptional service to your customers. 6. Ensuring Operational Resilience and Agility Incorporating Cloud, AI, and RPA technologies, we help you build digitally resilient ecosystems. These ecosystems allow you to adapt swiftly to market changes, fostering business growth. Our rigorous business analysis ensures a tailored, cost-effective technology solution that supports your business needs and continuity plans. Unveiling Our Services: Transforming Concepts into Reality ELEKS offers a range of comprehensive application development services to cater to all your needs: Desktop Software Our full-cycle application development includes seamless desktop app integration for various operating systems, ensuring a smooth experience for users of Windows, macOS, and Linux. Web Applications From technology consulting and UX design to front and back-end development, deployment, and support, our web application development service covers every aspect of creating successful web solutions. Custom Mobile Apps Our mobile application development services provide end-to-end solutions for iOS and Android platforms, delivering flawless performance, robust security, and an enhanced user experience. Data Warehouse and BI Solutions We specialize in delivering advanced Data Warehouse and Business Intelligence solutions across different domains, unlocking actionable insights and driving operational efficiency. Our Workflow: Making Your Vision a Reality Our application development process involves key steps that ensure the success of your project: 1. Idea Validation: We collaborate with you to outline your requirements, identifying ideas that hold the most potential for long-term success. 2. Innovation and Development: Our expert development team designs a custom solution utilizing emerging technologies to address gaps in your current IT ecosystem. 3. Software Testing: We ensure your custom app meets both functional requirements and quality standards, performing user acceptance testing and providing support with technical documentation. 4. Project Governance: Our governance covers product deployment, progress reporting, and issue resolution, keeping you informed and your project on track. When you partner with ELEKS, you're partnering with a Top 100 Global Outsourcing development company that places your project in capable hands. Unlock Your Potential with ELEKS ELEKS' custom application development services are more than just solutions – they are opportunities to innovate, compete, and thrive in the digital age. With a dedicated team of over 2000 software experts and a proven track record of success, we're ready to transform your ideas into reality. Contact us today to embark on a journey of innovation, efficiency, and growth with ELEKS as your trusted partner.

Service

Made to Order

Product & Service

New

ISO


Embroidery machines Leasing

Elevate Your Textile Business with Embroidery Machine Leasing from CWB National Leasing Transforming Your Creative Ventures with Flexible and Cost-Effective Solutions In the dynamic world of textile and garment production, embroidery machines are pivotal for adding value and uniqueness to products. Leasing embroidery machines through Canadian Western Bank (CWB) National Leasing offers a strategic and financially astute solution for businesses looking to expand their embroidery capabilities. Here’s how leasing embroidery machines can enhance your textile business: 1. Rapid Equipment Access CWB National Leasing values the pace and efficiency of your business. They offer a fast and streamlined leasing process, with decisions typically made within 48 hours of application submission. This swift turnaround ensures that your embroidery machines can be delivered and operational quickly, keeping your production line active and efficient. 2. Enhanced Financial Flexibility Leasing embroidery machines with CWB National Leasing increases your purchasing power. Opting for periodic payments over a large upfront purchase helps free up capital for other crucial business operations. Additionally, the flexibility to add extra features or accessories to your machines for a small payment increase enables customization to meet your specific production requirements. 3. Effective Cash Flow Management With manageable lease payments spread over the term, your embroidery machines begin contributing to your business’s revenue while they are still being paid off. This approach helps maintain a healthy balance between expenses and revenue, which is essential for business growth and stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Advantages Leasing embroidery machines can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to explore how leasing can positively impact your business’s tax position. Conclusion Choosing to lease embroidery machines through CWB National Leasing is a strategic decision that equips your textile business with advanced equipment while maintaining financial agility. It ensures access to state-of-the-art embroidery machines, vital for producing high-quality, detailed designs, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, increased production capacity, and greater profitability, helping your business to thrive in the competitive textile industry.

Service

In Stock

Service

New

ISO


Pipe Recovery

Ensuring Continuity with InWaTec Combined’s Electric Line Pipe Recovery Services In the dynamic arena of oil and gas extraction, the unexpected is the only constant. One of the most formidable challenges that can grind operations to a halt is the dreaded scenario of a stuck drill string. Recognizing the critical need for swift and effective resolution, InWaTec Combined offers specialized Electric Line Pipe Recovery Services, designed to address and rectify such downhole dilemmas. When a drill string becomes lodged downhole, it is not just an obstacle; it represents a halt in production, potential damage to resources, and a significant operational cost. InWaTec Combined's Electric Line Pipe Recovery Services are the answer to this industry-wide challenge. Our services employ advanced wireline technology, leveraging the power of electric lines to deliver targeted interventions that free the stuck pipe. Our approach to pipe recovery combines precision-engineered tools with real-time data transmission capabilities. This dual advantage enables our skilled operators to assess the situation accurately and execute recovery procedures with minimal risk to the wellbore or the environment. By integrating our electric line expertise with our pipe recovery operations, we ensure that your drill rig can return to its primary function with minimal downtime. The electric lines play a crucial role; they not only serve as a conduit for the necessary tools to navigate the wellbore but also provide a continuous stream of data back to the surface. This data is critical for making informed decisions during the recovery process, allowing for adjustments and interventions that are precise and situation-specific. At InWaTec Combined, we understand that time is of the essence in such operations. Our Electric Line Pipe Recovery Services are designed for rapid deployment and execution, ensuring that your operations can swiftly transition from a state of suspension to full productivity. Our commitment to innovation, safety, and efficiency is unwavering, as we strive to provide solutions that minimize operational disruptions and maintain the integrity of your wellbore. In the face of stuck pipe challenges, you can count on InWaTec Combined to deliver not just services, but solutions that propel your operations forward. Trust in our expertise to navigate the complexities of downhole recovery, ensuring that your operations remain resilient and robust, no matter what obstacles lie beneath.

Service

In Stock

Service

New

API

Land Freight


Professional Hand Controller

ROV Controller

Introducing Poseidon Robotics' Professional Hand Controller: Elevating ROV Operations to New Heights At Poseidon Robotics, we understand the crucial role that precision and control play in the success of your subsea missions. That's why we are thrilled to present our Professional Hand Controller – the ultimate tool for commanding your underwater operations with unparalleled accuracy and ease. A Perfect Match for the Lanai ROV The Professional Hand Controller comes as standard equipment with our highly-acclaimed Lanai ROV. Born from years of research, development, and feedback from industry professionals, the Lanai ROV is a testament to our commitment to excellence. And now, it is accompanied by a hand controller that is as exceptional as the ROV itself. Customization Options to Suit Your Style We believe that your tools should not only perform flawlessly but should also reflect your personality and style. The Professional Hand Controller comes in an elegant black anodized finish as standard, exuding a sense of professionalism and reliability. However, we understand that individuality matters, which is why we offer the option to customize the hand controller in a blue anodized finish or a variety of colors. Ergonomic Design for Enhanced Comfort Poseidon Robotics places great emphasis on user experience. The Professional Hand Controller's ergonomic design ensures that your hands will remain comfortable even during extended periods of operation. Its intuitive layout and tactile controls make commanding the Lanai ROV a breeze, allowing you to focus on your mission without any distractions. Seamless Integration and Intuitive Control When it comes to subsea operations, every second counts. The Professional Hand Controller is designed to integrate seamlessly with the Lanai ROV, ensuring a hassle-free setup process. Its responsive and intuitive controls provide you with precise command over the ROV's movements, making it feel like an extension of your own arm. A Trusted Companion for Professional Explorers Poseidon Robotics has earned the trust of subsea professionals worldwide through our unwavering commitment to quality and innovation. The Professional Hand Controller is no exception – built with durability and reliability in mind, it is designed to withstand the harsh conditions of the underwater environment, providing you with a trusted companion on all your missions. Unlock New Possibilities with Poseidon Robotics As pioneers in subsea robotics, we are dedicated to equipping you with the most advanced tools for exploration and discovery. The Professional Hand Controller, paired with the Lanai ROV, unlocks new possibilities in the field of underwater operations. Whether you are conducting scientific research, performing intricate inspections, or engaging in search and rescue missions, our hand controller enhances your capabilities and brings you closer to your objectives. Choose Precision, Choose Poseidon Robotics Take your subsea operations to new heights with Poseidon Robotics' Professional Hand Controller. Embrace precision, embrace control, and embark on a journey of exploration and achievement like never before. Elevate your ROV experience and choose Poseidon Robotics as your trusted partner in subsea robotics. Get Your Professional Hand Controller Today Contact Poseidon Robotics now to learn more about our Professional Hand Controller and how it can revolutionize your underwater missions. Let us be your guide as you navigate the depths and uncover the wonders that lie beneath the surface. Together, we will redefine what is possible in subsea exploration.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Data Science Service

Software Development

Eleks in Toronto

More information

ELEKS Data Science Services: Unleash the Power of Data for Business Growth In the age of information, harnessing the potential of your data is paramount for business success. At ELEKS, we don't just work with data – we transform it into actionable insights that supercharge your business performance. Our Data Science Services are your gateway to unlocking the untapped potential within your data and driving growth. Dive Deep into Data and Elevate Business Performance: Utilize Data for Sales Boost: Our offerings span across diverse sectors such as e-commerce, retail, fashion, and finance. With expert data analysis and machine learning development services, we empower businesses to extract insights that fuel personalized customer experiences. Enhance sales, reduce churn, optimize conversions, and elevate your Average Order Value (AOV) by harnessing tailored solutions. Enhance Operational Efficiency: The logistics and agriculture sectors benefit from our data science consulting and optimization services. Embrace machine learning models for predictive maintenance, smart route planning, yield optimization, and fraud detection. Revolutionize business efficiency and drive results with cutting-edge insights. Navigate Risks with Confidence: Make informed decisions that mitigate risks. We empower you with prescriptive analytics and machine learning models that predict market demand, qualify leads, and enhance your business processes. Gain a competitive edge by focusing your efforts where they yield maximum Return on Investment (ROI). Elevate Operational Performance: Efficiency is the hallmark of success. Our data scientists leverage proven machine learning techniques to optimize processes, whether it's managing call center workloads or inventory. Achieve cost-effective asset management and precise controls, streamlining your operations for maximum effectiveness. Deliver Exceptional User Experiences: Elevate user experiences with intelligent digital assistants powered by natural language processing (NLP), computer vision (CV), and deep learning. Transform unstructured content into meaningful insights, enhance customer acquisition and retention, and usher in a new era of interaction. ELEKS Data Science Services: Unlocking Your Potential: 1. Data Analytics and Modelling Modules: Identify insights, seize opportunities, and optimize outcomes. 2. Predictive/Optimization Model Microservices: Realize intelligent solutions tailored to your needs. 3. Comprehensive Documentation and Source Code: Transparent and accessible deliverables. 4. Data Flow Consultancy, Reporting, and Demos: Stay informed and engaged. 5. Guaranteed Quality Level: Excellence is non-negotiable. 6. Analytics Models' Deployment: Bringing insights to life. Why Choose ELEKS’ Data Science Services? 1. Leading Data Science Team: With one of Ukraine's largest data science teams, we tailor approaches to your needs. 2. Expertise and Experience: Decades of expertise in building machine learning models that deliver results. 3. Cost-Effective Consultation: Test your hypotheses efficiently with our data science consulting services. 4. Business-Centric Approach: Our experts combine technical prowess with business acumen. 5. Descriptive Analytics: Interpreting historical data to optimize your business value chain. 6. Predictive Analytics: Focused insights to drive ROI, manage risks, and quantify success. 7. Prescriptive Analytics: Evidence-based decision-making for strategic planning. 8. Process Optimization and Automation: Automate workflows and enhance controls. 9. ELEKS Data Science Platform (eDSP): Streamlining model management for streamlined success. Embrace the Future with ELEKS Data Science Services: In a world awash with data, ELEKS is your compass, guiding you towards data-driven excellence. From sales enhancement to risk mitigation, we empower businesses with insights that drive success. With ELEKS, your data is not just a resource – it's your competitive advantage. Welcome to the realm of data transformation – welcome to ELEKS Data Science Services.

Service

Made to Order

Service

New

ISO


Shelving Leasing

Optimize Your Storage Solutions with Shelving Leasing from CWB National Leasing Streamlining Your Space Management with Flexible and Economical Equipment Leasing For businesses in retail, warehousing, or any sector that requires efficient space management, robust and versatile shelving systems are crucial. Leasing shelving through Canadian Western Bank (CWB) National Leasing provides a smart, adaptable, and financially sensible solution to enhance your storage and organization capabilities. Here’s how leasing shelving can benefit your business: 1. Rapid Equipment Accessibility CWB National Leasing understands the need for efficient space management in your business operations. They offer a quick leasing process, typically providing decisions within 48 hours of application submission. This ensures that your shelving systems can be delivered and operational quickly, enhancing your storage capabilities without significant delays. 2. Enhanced Financial Flexibility Leasing shelving with CWB National Leasing boosts your buying power. By opting for periodic payments over a large upfront purchase, you free up capital for other critical business needs. Additionally, the option to add extra features or accessories to your shelving systems for a small payment increase allows for customization to meet your specific storage requirements. 3. Effective Cash Flow Management Smaller lease payments over the term mean your shelving systems start contributing to your business’s efficiency while still being paid off. This approach helps maintain a balanced expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing shelving can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Choosing to lease shelving systems through CWB National Leasing is a strategic decision that provides your business with essential storage solutions while maintaining financial agility.

Service

In Stock

Service

New

ISO


Braided Line 7/32 inch Sour Service

Superior Strength and Durability: InWaTec Combined’s 7/32" Braided Line for Sour Service Operations In the demanding and intricate world of well interventions, particularly in sour service conditions, the need for equipment that can withstand the rigors of a corrosive environment is paramount. InWaTec Combined is proud to introduce our 7/32" Supa 75 braided line, a specialized solution crafted for the harsh realities of fishing operations in sour service conditions where hydrogen sulfide (H2S) and other corrosive agents are present. Our 7/32" Supa 75 braided line is at the heart of InWaTec Combined's sour service offerings. Designed with high tensile strength and resistance to corrosive elements, this braided line ensures that fishing operations can be carried out with confidence and security, even in environments where H2S poses a significant risk to standard equipment. Resilience Under Pressure: The Supa 75 braided line is not just another cable; it's a product of rigorous engineering and quality materials, able to endure the stressors of sour well conditions without compromising performance. Corrosion Resistance: Our braided line is treated and constructed to resist the corrosive action of sour gas, ensuring longevity and reliability. This means uninterrupted operations and fewer replacements, saving time and resources. High-Performance Operations: With the Supa 75 line, fishing operations are conducted more efficiently and safely. Its robust build allows for the extraction of stuck equipment from the wellbore without the fear of line failure. Safety as a Priority: The safety of well operations is a non-negotiable aspect of InWaTec Combined’s services. The Supa 75 line's integrity in sour environments means enhanced safety for personnel and the well itself. Our commitment to innovation and customer service means that alongside the provision of the 7/32" Supa 75 braided line, InWaTec Combined offers comprehensive support and expertise. We provide tailored solutions that meet the unique challenges of each operation, ensuring that our clients have the best tools and knowledge at their disposal. Choose InWaTec Combined for your sour service operations and benefit from the advanced performance of our 7/32" Supa 75 braided line. With our technology and support, you can expect to extend the life of your well, maintain production efficiency, and uphold the highest safety standards. Trust in our braided line to deliver when it matters most, ensuring that your operations continue to flow smoothly, even in the face of adversity.

Service

In Stock

Service

New

API

Land Freight


Tubular Manufacturing Traceability

PipeDNA is a cloud-based pipe management solution

Enhancing Tubular Manufacturing Traceability with PipeDNA: Ensuring Quality and Compliance In the oil and gas industry, maintaining traceability throughout the tubular manufacturing process is crucial for ensuring quality, compliance, and operational efficiency. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage tubular manufacturing traceability, increase visibility, and optimize their operations for enhanced quality control. Comprehensive Inventory Management and Tracking: PipeDNA offers comprehensive inventory management and tracking capabilities for tubular products, enabling stakeholders to have full visibility into their manufacturing processes. From raw materials to finished products, PipeDNA allows for seamless tracking of each component, ensuring accurate inventory control, reducing waste, and optimizing production planning. Gain insights into utilization, activity, and trends, empowering stakeholders to make data-driven decisions and streamline their manufacturing operations. Streamlined Logistics Management: PipeDNA simplifies logistics management by providing stakeholders with a centralized platform to manage shipments, track status, and document crucial information. Whether it's inbound or outbound logistics, PipeDNA ensures seamless coordination and real-time visibility into the movement of tubular products. The platform also facilitates pipe bundling, allowing stakeholders to optimize transportation and storage, reducing costs and improving overall efficiency. Efficient Inspection Management: With PipeDNA's inspection management feature, stakeholders can effectively manage inspection jobs throughout the tubular manufacturing process. From initial inspections of raw materials to final product inspections, PipeDNA enables tracking and monitoring of job status across multiple sites. By streamlining inspection profiles and documentation, stakeholders can ensure compliance with quality standards, reduce errors, and maintain consistent product quality. Automated Tally Operations: PipeDNA simplifies and automates the tallying process during tubular manufacturing. Stakeholders can create and manage tally operations within the platform, eliminating manual calculations and reducing the risk of errors. By automating pipe tally jobs and workflows, PipeDNA saves time, improves accuracy, and enhances overall manufacturing efficiency. Accurate tally operations enable stakeholders to maintain reliable records and ensure traceability throughout the production cycle. Enhanced Identification and Traceability: PipeDNA's identification and traceability features provide stakeholders with quick and accurate pipe identification, detailed pipe information, activity history, and traceability documentation. By integrating popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables seamless identification and tracking of each tubular product. This enhanced traceability minimizes the risk of errors, supports efficient recalls if necessary, and ensures compliance with industry regulations. Designed for the Oil and Gas Industry: PipeDNA was designed specifically for stakeholders across drilling, manufacturing, and oilfield services, catering to their unique needs in tubular manufacturing traceability. Whether you are a drilling contractor, oilfield rental company, oilfield and inspection service provider, steel pipe manufacturer, or pipe distribution and storage provider, PipeDNA offers tailored solutions to streamline your tubular manufacturing processes and drive quality and compliance. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's emerging technologies to optimize tubular manufacturing traceability. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, allowing for efficient barcoding and labeling. Furthermore, PipeDNA is RFID ready, supporting the integration of RFID technologies for accurate asset tracking and improved traceability. The platform also enables IoT data integration using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced decision-making during the manufacturing process. PipeDNA revolutionizes tubular manufacturing traceability in the oil and gas industry, providing a smart cloud-based platform that enhances quality control, compliance, and visibility. With its comprehensive inventory management, streamlined logistics operations, efficient inspection management, automated tally operations, and enhanced identification and traceability features, PipeDNA empowers stakeholders to optimize their tubular manufacturing processes, minimize errors, and ensure compliance with industry standards. Leverage the power of PipeDNA and take your tubular manufacturing traceability to new heights of efficiency and reliability.

Service

Currently in Use

Service

New

API

Air Freight


Anti-rotational internal Roll-on Connector for Coiled Tubing

Coiled Tubing Tools

ARC Coiled Tubing Connector | Anti-Rotational Roll-On Tool | Marlin Oil Tools The ARC (Anti-rotational internal Roll-on Connector) from Marlin Oil Tools serves as the essential link between the smooth lower end of coiled tubing (CT) and any downstream downhole tool required for well intervention projects in the oil and gas industry. Featuring a unique design, the ARC seamlessly connects the smooth-walled CT with the threaded interface of downhole tools, ensuring efficient and reliable operations in challenging wellbore environments. Key Features: Three grooves in the upper part of the connector facilitate the secure attachment and rolling of the coiled tubing, enhancing stability and operational performance. The lower part of the ARC is equipped with a threaded interface, enabling seamless connection with various downhole tools featuring connecting threads. O-rings positioned below the grooves provide a robust barrier, effectively sealing against in-line working pressures and preventing leaks during operations. A strategically placed slot along the grooves offers a significant advantage, allowing for the internal welding seam of the coiled tubing to be securely locked during connector installation. This anti-rotational feature ensures the stability of the connector and minimizes the risk of rotation during operation. The ARC Coiled Tubing Connector from Marlin Oil Tools is engineered to deliver exceptional performance, reliability, and sealing capabilities in oil and gas coiled tubing applications. Experience enhanced efficiency and confidence in your well intervention projects with the ARC connector from Marlin Oil Tools.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Coiled Tubing Hydraulic Disconnect

HDI Coiled Tubing Tool

Introducing the HDI (Hydraulic Disconnect) from Marlin Oil Tools: The Ultimate Safety and Efficiency Tool for Coiled Tubing Operations in Oil and Gas Marlin Oil Tools proudly presents the HDI (Hydraulic Disconnect), a sophisticated downhole tool designed to enhance safety and operational efficiency during workover and other well jobs. As a critical component of the borehole assembly (BHA), the HDI facilitates a controlled split of the BHA, offering a reliable solution for managing challenging downhole conditions. Discover the unparalleled benefits and features of the HDI, making it an indispensable tool for your coiled tubing operations. Key Features of the HDI (Hydraulic Disconnect): Controlled BHA Splitting: The HDI is engineered to perform a precise and controlled split of the BHA, separating the upper part from the lower part on demand. This feature is invaluable for targeted intervention and mitigating risks associated with BHA retrieval. Simple Activation Mechanism: Activation of the HDI is achieved by dropping a steel ball through the coil tubing from the surface. The ball travels down the length of the CT, seating in the piston within the HDI, initiating the disconnect process. Pressure-Activated Release: Upon the ball seating, downward flow ceases, allowing pressure to build above the ball. Once the pressure reaches a specific shear level, shear screws are cut, enabling the top and bottom housings of the HDI to disconnect smoothly. Versatile Utility: The HDI is suitable for any operation where there is a risk of the BHA becoming stuck in the well. It provides a safer and more controlled alternative to overpulling, significantly reducing the risks of equipment loss or damage. Elevate your well intervention strategies with the HDI (Hydraulic Disconnect) from Marlin Oil Tools, a leading-edge solution designed for maximum operational safety and efficiency in the oil and gas sector. The HDI ensures a controlled, precise separation of the BHA, utilizing a simple yet effective steel ball activation mechanism for hassle-free operation. Ideal for workover and other critical well jobs, the HDI's pressure-activated release system offers a reliable disconnect in situations where BHA sticking poses a risk. Choose the HDI for a safer, more efficient approach to managing downhole challenges, minimizing downtime, and enhancing overall operational success. Why Choose the HDI from Marlin Oil Tools? Enhanced Operational Safety: Minimizes risks associated with stuck BHA, providing a controlled disengagement method. Streamlined Activation: The steel ball activation mechanism simplifies the disconnect process, enhancing ease of use. Operational Flexibility: Adaptable to a wide range of well jobs, the HDI is essential for operations prone to BHA sticking. Risk Mitigation: Offers a safer alternative to overpulling, reducing the likelihood of equipment damage and operational delays. The HDI (Hydraulic Disconnect) by Marlin Oil Tools represents the forefront of innovation in downhole safety and efficiency, ensuring your coiled tubing operations are supported by the highest standards of reliability and control. Incorporate the HDI into your coiled tubing operations to achieve optimal outcomes in well intervention and maintenance tasks.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Lead Impression Block

Downhole Tools

Elevate Downhole Diagnostics with HOCA Oil Tools' Lead Impression Blocks In the intricate world of downhole operations, understanding the precise conditions within the wellbore is not just beneficial—it's imperative. At HOCA Oil Tools, we specialize in providing top-tier downhole slick line tools that cater to the diverse needs of the oil and gas industry. A standout in our product lineup is the Lead Impression Block (LIB), an indispensable tool designed for capturing clear, detailed impressions of downhole conditions. Lead Impression Blocks: The Key to Accurate Downhole Intelligence HOCA's Lead Impression Blocks are engineered for exceptional performance, providing operators with the critical data needed to make informed decisions. Made with high-quality materials, our LIBs are designed to withstand the challenging environments found within wellbores, ensuring reliable results every time. Six Benefits of Using HOCA's Lead Impression Blocks: Precision Diagnostics: Our LIBs provide precise imprints of the downhole environment, enabling accurate identification of obstructions, tool fishings, and the condition of the wellbore. Cost-Efficiency: By delivering accurate downhole data, our LIBs help avoid unnecessary operations and reduce the risk of costly mistakes, leading to more efficient and cost-effective well management. Easy Interpretation: The clear impressions made by our LIBs allow for straightforward analysis, enabling quick decision-making and streamlined operations. Durability and Reliability: Designed for the rugged downhole environment, HOCA's Lead Impression Blocks are built to last, providing consistent, reliable results even in the most challenging conditions. Versatility: Compatible with various downhole tools and suitable for multiple applications, our LIBs are a versatile addition to any downhole toolset, making them ideal for a wide range of operations. Enhanced Safety: By providing accurate information about downhole conditions, our LIBs help minimize the risks associated with downhole operations, enhancing overall safety for personnel and equipment. Transform Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we're committed to innovation and excellence. Our Lead Impression Blocks are a testament to our dedication to providing the oil and gas industry with tools that not only meet but exceed expectations. By integrating our LIBs into your operations, you can expect enhanced diagnostic capabilities, improved operational efficiency, and reduced costs. Embrace the clarity and precision offered by HOCA's Lead Impression Blocks and experience a new level of downhole diagnostic prowess. Choose HOCA Oil Tools for all your downhole needs and unlock the full potential of your wellbore operations.

Buy

In Stock

Product & Service

New

API

Air Freight


Thru-Tubing MatrixStixx 2.25 inch

StimStixx 2.25 inch MatrixStixx

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionize Your Operations! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! StimStixx Technologies is proud to present our cutting-edge Thru-Tubing Acid Stimulation system, designed to meet all your needs with ease and precision. Our innovative product offers a hassle-free deployment process via electric wireline, ensuring a seamless integration into your operations. Available in both HCL and HCL/HF acid blends, our solution guarantees the utmost effectiveness in achieving your desired results. At the heart of our Thru-Tubing Acid Stimulation system lies a specially formulated solid acid stick. Whether you're using slickline, wireline, coil tubing, or tractor-conveyed methods, our solid acid stick delivers heated acid vapor with pinpoint accuracy directly to the zone of interest. This groundbreaking approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the heated acid vapor. Not only does our system deliver exceptional performance, but it also provides numerous benefits that will enhance your operations in more ways than one. By utilizing our Thru-Tubing Acid Stimulation, you'll experience reduced CO2 emissions, lower downtime, and simplified implementation. The increased precision and fast-acting nature of our solution will save you valuable time and resources, while also reducing manpower, rig, and equipment costs. Additionally, the elimination of contaminated effluent means a reduced risk of spills at the surface and eliminates the need for post-treatment clean-up or disposal. Join the countless businesses already benefiting from our Thru-Tubing Acid Stimulation system. Embrace efficiency, precision, and environmental responsibility with StimStixx Technologies. Contact us today to revolutionize your operations and unlock a new level of success!

Buy

In Stock

Product & Service

New

API

Air Freight


H Storm Choke 2 inch

Ambient Valve

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


Cloud Based Solutions

Software Development

Eleks in Toronto

More information

ELEKS: Transforming Energy Excellence with Cloud-First Strategies In the dynamic realm of the energy sector, innovation isn't a luxury – it's a necessity. ELEKS takes the lead, harnessing our unparalleled energy sector technology expertise to redefine the way you manage energy and utilities. With our cutting-edge cloud-first strategies, we're here to propel your operations to new heights of efficiency, cost-effectiveness, and security. Here's how ELEKS can be your catalyst for an energy future that's smarter, more connected, and infinitely more agile: Tailored Cloud-First Strategies: Your organisation is unique, and so are our strategies. ELEKS expertly tailors cloud-first approaches to fit your specific needs, unlocking unparalleled potential for your energy operations. Performance Optimization: Elevate your performance benchmarks with cloud-first strategies. Our solutions optimize the performance of your software systems, ensuring they operate at their peak efficiency. Cost-Effectiveness Amplified: Say goodbye to bloated budgets. Our cloud-first strategies enhance cost-effectiveness, helping you allocate resources efficiently and maximize the return on your technology investments. Resilience Reinvented: Your operations require robustness. ELEKS' cloud-first strategies bolster the resilience of your systems, ensuring seamless operations even in the face of challenges. Data Security Elevated: Data security is non-negotiable. With our cloud-first strategies, safeguarding your data becomes paramount, protecting your valuable assets from any potential threats. Big Data Unleashed: Embrace the power of Big Data with ELEKS. Our cloud migration services enable you to harness Big Data's potential, enhancing customer satisfaction through real-time analytics on energy consumption. Real-Time Customer Insights: Elevate your customer experience game. Our solutions empower you to provide end-users with real-time insights into their energy consumption, fostering satisfaction and engagement. Advanced Data Analytics: Data is your ally. Our team of custom software development experts implements cloud-based solutions infused with advanced data analytics, turning raw information into actionable insights. ML-Driven Precision: Embrace the future of energy management. Our solutions feature Machine Learning (ML) capabilities, enabling predictive maintenance and driving the precision of your energy systems. ELEKS: For an Agile Energy Future ELEKS isn't just a service provider – we're your innovation partner. Our energy sector technology expertise doesn't just promise solutions; it delivers transformation. With ELEKS, you're not just adopting cloud-first strategies – you're embracing an energy future that's agile, connected, and limitless. Join us in scripting a new energy narrative where innovation meets precision, cost-effectiveness is a norm, and security is paramount. With ELEKS, you're stepping into a realm where technology-driven solutions redefine energy excellence and operational aspirations become reality. Embrace a future where cloud-first strategies power your energy journey, and efficiency is at the heart of every operation.

Service

Made to Order

Service

New

ISO


Planers Leasing

Elevate Your Business with Planer Equipment Leasing from CWB National Leasing Transforming Your Operations Through Flexible Equipment Solutions For businesses in construction, woodworking, or manufacturing, having the right planer equipment is essential for precision and efficiency. Leasing your planers through Canadian Western Bank (CWB) National Leasing offers an innovative and financially prudent way to enhance your operations. Here's how leasing planers can significantly benefit your business: 1. Speedy Equipment Procurement CWB National Leasing values the importance of time in your business. They ensure a quick leasing process, with a decision typically made within 48 hours of application submission. This rapid turnaround means your planer equipment can be delivered and operational soon after approval, minimizing any disruption to your projects. 2. Boosted Purchasing Power Leasing planers with CWB National Leasing increases your financial leverage. Instead of a large initial investment, you can make periodic payments, thereby freeing up capital for other business investments. Furthermore, you have the option to add extra features or accessories to your equipment with a minor increase in payments, enhancing its capabilities. 3. Optimized Cash Flow Management With smaller, spread-out lease payments, your planer equipment starts contributing to your revenue even as it's being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business stability and growth. 4. Customized Payment Structures Recognizing that every business has unique financial needs, CWB National Leasing offers flexible payment options, including seasonal, semi-annual, or annual plans. This adaptability is particularly beneficial for businesses with fluctuating income patterns, ensuring that payments align with your financial flow. 5. Potential Tax Advantages Leasing can offer tax benefits, such as allowing you to expense lease payments instead of capitalizing the cost of the planer equipment. Consulting with a tax advisor is advisable to understand how leasing can favorably impact your business’s tax position. Conclusion Opting to lease planer equipment through CWB National Leasing is a strategic decision that provides your business with necessary tools while maintaining financial agility. It ensures access to advanced equipment, essential for precise and efficient operations, without the financial burden of a large upfront purchase. This approach paves the way for enhanced operational capabilities, growth, and profitability in your business.

Service

In Stock

Service

New

ISO


Slickline Rope Socket

Rope Socket

HOCA Oil Tools B.V.'s Expertise in Slickline Rope Sockets In the dynamic world of oil and gas extraction, precision and reliability are paramount. At HOCA Oil Tools B.V., we take pride in our extensive expertise in slickline operations, particularly our specialized rope sockets designed for varied downhole conditions. Our product range includes Type ‘AO’, ‘AD’, ‘AS’, ‘BO’, ‘BD’, ‘BS’, ‘CO’, ‘CD’, ‘CS’,‘CGO’, ‘D’, ‘DD’, ‘DS’, ‘GO’, ‘RC’, ‘SA’, ‘HO’, and ‘HD’ rope sockets, each tailored for specific wireline tasks and environmental conditions. Our rope sockets are crafted from high-quality alloy materials, ensuring durability and optimal performance. They cater to a wide range of wire sizes and types, accommodating single-strand, multi-strand, and encapsulated lines. With features like spring disc supports, releasing slips, and heavy-duty clamps, our rope sockets ensure secure connections and safe operations under intense downhole pressures. The main features of some of the various rope sockets offered by HOCA Oil Tools B.V. are as follows: Type ‘CGO’ Rope Socket: Designed for use with small stranded lines up to 1/4” diameter, this rope socket has an additional swivel bottom, making it similar in design to the Type ‘CO’ but with enhanced functionality for specific applications requiring rotation. Type ‘D’ Dummy Rope Socket: Available with threaded or QLS Connections, this tool can be attached to other types of tools with a pin connection for various wireline applications, offering great versatility and adaptability in operational setups. Type ‘GO’ Rope Socket: Engineered specifically for single conductor cable heads, providing secure and reliable connections for specialized wireline operations. Type ‘RC’ Rope Socket: This assembly is tailored for encapsulated line applications, offering enhanced protection and durability for operations involving encapsulated cables. Type ‘SA’ Rope Socket: Designed for swabbing applications with Babbitt fill, this rope socket is tailored for operations requiring the retrieval of fluids from wells, ensuring efficient and reliable performance. Type ‘HO’ and ‘HD’ Heavy Duty Rope Socket: These are intended for heavy-duty wireline work and feature a unique design that traps the wire, held in place with socket screws, suitable for more demanding operations and environments. Each type of rope socket has unique features tailored to different wireline operations, ensuring that HOCA Oil Tools B.V. can provide a suitable solution for a wide range of downhole conditions and requirements. HOCA Oil Tools B.V. stands at the forefront of slickline technology, offering solutions that ensure safety, efficiency, and reliability. Our commitment to innovation and quality has established us as a trusted partner in the oil and gas industry worldwide.

Buy

In Stock

Product & Service

New

API

Air Freight


Oil Spill Kit - 5 Gallon Bucket

Bag Oil Spill Kit, includes: Oil-Only Absorbent Pads, Oil-Only Absorbent Pillows, Oil-Only Absorbent Socks, Disposal Bags, and Nitrile Gloves

OilHungry in Stoney Creek

More information

The spill kit contains a curated selection of components designed for effective and targeted response to oil-based spills. 5 Oil-Only Absorbent Pads Size: Standard 8” x 11.5” Purpose: Swiftly absorb and contain oil-based liquids, preventing further spread and facilitating quick cleanup. 3 Oil-Only Absorbent Pillows Size: 18” x 18” Purpose: Larger pillows for enhanced absorption, particularly useful for managing larger volumes of spilled oil. 2 Oil-Only Absorbent Socks (3"x4') Size: 3 inches in diameter, 4 feet in length Purpose: Contain and control the spread of oil spills, especially effective in restricting the movement of liquids in confined spaces. Disposal Bags Purpose: Facilitate the proper containment and disposal of used absorbent materials, ensuring a responsible and hygienic cleanup process. Nitrile Gloves (1 Pair) Purpose: Essential personal protective equipment for safe handling during the cleanup, protecting hands from direct contact with oil-based substances. Advantages and Applications • The combination of pads, pillows, and socks caters to different spill sizes and scenarios, providing a versatile solution for oil-based spills. • The inclusion of larger pillows enhances the kit's capacity to address spills effectively, ensuring a swift and comprehensive cleanup process. • Nitrile gloves prioritize the safety of personnel involved in the cleanup, preventing direct contact with potentially harmful substances. • Disposal bags contribute to responsible waste management, ensuring the proper containment and disposal of used absorbent materials. The spill kit is well-suited for a range of industrial operations, where oil-based spills may occur. Its comprehensive components make it a valuable tool for addressing various spill sizes and ensuring a quick, efficient, and environmentally responsible cleanup process. The spill kit boasts a total absorption capacity, capable of absorbing up to 15 liters (3.87 gallons) of liquid. This capacity signifies the kit's effectiveness in managing spills of varying sizes, making it a reliable and versatile solution for fluid cleanup. Whether addressing smaller incidents or more substantial spills, the spill kit's impressive absorption capacity ensures a comprehensive and efficient response to liquid-based challenges. Water-Resistant Spill Kit is designed for oil-based spills, showcasing water-resistant properties. The kit's composition ensures effective cleanup of oil spills in diverse environments, including land, rivers, lakes, and oceans. By selectively absorbing oil while repelling water, it provides a reliable solution for managing oil spills in various settings, making it versatile and suitable for a wide range of spill response scenarios.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Internet of Things Specialization

Integrating IoT Capabilities into the Oil and Gas Sector with Nulux Network Solutions In the perpetually evolving landscape of the oil and gas industry, the adoption and integration of Internet of Things (IoT) technologies have become pivotal in navigating through the complex, dynamic, and critical operational scenarios. Nulux Network Solutions, drawing from its extensive proficiency in wireless systems and infrastructure, proudly extends its specialization in IoT, ensuring that your operations are not merely efficient but are resonating with the rhythm of technological advancement. Why IoT in the Oil and Gas Industry? The infusion of IoT into the oil and gas sector amplifies operational intelligence, providing real-time data, optimizing processes, enhancing safety protocols, and significantly reducing operational costs. From remote monitoring, predictive maintenance, automated safety checks, to data-driven decision-making, IoT stands out as the bridge connecting the physical and digital realms of your operations. Nulux - Your Beacon into the IoT Universe Navigating through the intricate world of IoT, Nulux emerges as your ally, ensuring that your step into the IoT universe is stable, secure, and symbiotic with your operational dynamics. Our IoT Specialization encapsulates: Device Integration: Ensuring that sensors and devices are seamlessly integrated into your operations, capturing pivotal data points from every nook and corner of your processes. Data Analytics: Utilizing data harvested from various IoT devices, our systems facilitate astute analytics, enabling you to draw actionable insights, and thereby, enhancing operational decision-making. Security: In the IoT sphere where data is omnipresent, we enforce rigorous security protocols ensuring that every byte of information is shielded against potential cyber threats. Harnessing Nulux’s Wireless Prowess in IoT Implementation Implementing IoT is not just about embedding sensors; it's about ensuring that the data travels securely and reliably to where it's needed. Harnessing our profound expertise in wireless communication technologies, such as point-to-point and multipoint line configurations, we ensure that your IoT devices are not isolated islands but are communicatively interconnected, facilitating a continuous flow of data. Point to Point Configurations for Direct, Secure, and Reliable Data Transmission between two nodes, ensuring that critical data is transmitted securely and without loss. Multipoint Configurations enabling data transmission across multiple points, ensuring that your IoT network is expansively interconnected. Elevate Operational Intelligibility with Nulux IoT Imagine a world where your operational decisions are backed by real-time data, where predictive maintenance mitigates unplanned downtimes, and where your safety protocols are automated and perpetually vigilant. With Nulux's IoT specialization, this isn’t a distant dream but an achievable reality. Our solutions are meticulously crafted, considering the unique challenges and needs of the oil and gas sector, ensuring that your step into the world of IoT is not just progressive but is also coherent with your operational nature and future aspirations. Future-Proof Your Operations with Nulux Embark on a journey where every operational element is interlinked, every decision is data-driven, and every process is optimized through the intelligent, secure, and reliable integration of IoT into your operational fabric. With Nulux Network Solutions, step into a future where your operations are not just managed but are intelligently orchestrated, ensuring safety, efficiency, and a perennial evolution alongside technological advancements. Engage with Nulux, and let’s sculpt a future where your operations echo with intelligence, security, and unparalleled efficiency.

Service

In Stock

Service

New

ISO


Mobile Gas Troubleshooting

Gas Expertise

Responsive Mobile Gas Troubleshooting: We're Here to Be Part of the Solution Have you ever experienced the frustration of needing help but struggling to get through to anyone? Or perhaps you've encountered resistance when requesting changes to your work plan due to unexpected circumstances. At Lovat Gas Solutions, we understand that as a service-oriented company, our role is to respond to your evolving needs and be an integral part of the solution, rather than a source of more problems. We are committed to providing responsive mobile gas troubleshooting services that address your challenges and keep your operations running smoothly. When you choose Lovat Gas Solutions, you can expect: 1. Responsiveness: We recognize the importance of timely support. Our team is dedicated to being available and responsive when you need us the most. Whether it's troubleshooting a gas-related issue or making adjustments to your work plan, we are committed to addressing your concerns promptly and efficiently. 2. Collaboration: We believe in working closely with our clients to understand their unique needs and challenges. Our collaborative approach allows us to identify the most effective solutions and provide the support you require. We are here to listen, adapt, and work together to overcome any obstacles that may arise. 3. Problem Solvers: Our team of experts is well-equipped to tackle a wide range of gas-related issues. With our extensive knowledge and experience, we can troubleshoot problems and offer practical solutions that align with your goals. Count on us to be proactive problem solvers who are dedicated to finding the best outcome for your business. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We strive to exceed your expectations by delivering exceptional service and ensuring that we not only meet your immediate needs but also contribute to your long-term success. Your trust and satisfaction are the driving forces behind everything we do. Choose Lovat Gas Solutions as your partner for responsive mobile gas troubleshooting. Experience the difference of working with a company that is committed to being there for you, supporting your needs, and providing effective solutions. Contact us today, and let us be part of the solution to your gas-related challenges. Together, we will overcome obstacles and ensure the smooth operation of your business with Lovat Gas Solutions.

Service

In Stock

Service

New

ISO

Land Freight


Fiber Network Backbone Installation

Illuminating the Pathway to Enhanced Connectivity with Nulux: Pioneering Fiber Network Backbone Installation for the Oil & Gas Sector In the intricate labyrinth of the energy sector, wherein seamless data transmission forms the spinal cord of operational efficacy, establishing a robust, secure, and unfettered network backbone becomes imperative. At Nulux Network Solutions, our objective transcends beyond offering mere solutions; we are your partners in navigating through the convoluted pathways of data connectivity and communication within the oil and gas industry, ensuring that the artery of your operations pulsates with vigor, reliability, and sustainability. Sustaining the Future with Fiber Optics Nulux emerges as a beacon of sustainable advancements, offering an array of products, solutions, and services that cascade across the entirety of the energy value chain. We are steadfast in our commitment to guiding our partners in the oil and gas industry towards a future that not only resonates with sustainability but is also interwoven with technological prowess and innovation. Our Fiber Optic solutions symbolize this commitment, ensuring your journey towards a more sustainable future is always illuminated by the consistent, reliable, and efficient transmission of data. The Nulux Fiber Network Backbone Installation The oil and gas industry, characterized by its voluminous data generation, necessitates a network backbone that can shoulder the hefty demands of data transmission with unbridled efficiency and security. Our Fiber Network Backbone Installation service is not merely a technological provision but an embodiment of our expertise, experience, and dedication to ensuring your operations are always in sync with the digital pulse of the industry. Reliable Data Transmission: An uninterrupted flow of operational data is ensured, empowering your operations with real-time analytics, diagnostics, and vital decision-driving data. Fortified Security: Guarding your data against potential breaches and vulnerabilities with a fiber network that is securely fortified, ensuring a safe and secure environment for your data to traverse. Scalability: Our fiber network infrastructure scales in tandem with your operational expanse, ensuring that as your data demands burgeon, our network is always a step ahead in meeting those requirements with equal efficiency and reliability. A Tapestry of Operational Excellence Our Fiber Network Backbone Installation forms the intricate tapestry that interlaces your operational nodes, ensuring that the voluminous data generated is seamlessly integrated, conveyed, and utilized, forming the substrate upon which vital operational strategies and decisions are cultivated and realized. Safeguarding Your Data, Ensuring Its Journey is Unhindered At Nulux, we ensure that the conduit through which your data traverses is not merely operationally optimized but also securely shielded against potential cyber threats and vulnerabilities, fortifying your operational data against breaches and ensuring it navigates through a secure pathway. Join Hands with Nulux Embark on a journey where your operational data is not merely transmitted but is safeguarded, scrutinized, and utilized to shape a future wherein your operations echo with sustainability, operational excellence, and technological advancement. With our Fiber Network Backbone Installation, steer through the digital realms of the oil and gas industry with Nulux, where every bit of data, every decision, and every operational stride is backed by the stalwart reliability and security of our fiber-optic solutions. In a realm where data propels decisions, ensuring its secure, efficient, and unfettered transmission is paramount. Traverse with Nulux, where your data is not merely communicated but empowers your operations towards a future where every decision is data-driven, every operation is efficient, and your journey towards sustainability is continually illuminated by the steadfast glow of our solutions. Your journey towards an operationally efficient and sustainable future begins with Nulux. Let’s navigate through the digital corridors of the oil and gas industry together, ensuring your data navigates through the most secure, reliable, and efficient pathways, crafting a future where technology and sustainability converge to form a symphony of operational excellence. Let’s craft this future, together, with Nulux.

Service

In Stock

Service

New

ISO


Pumps Leasing

Enhance Your Operational Efficiency with Pump Leasing from CWB National Leasing Streamlining Your Business with Cost-Effective and Flexible Equipment Solutions For businesses in industries such as construction, mining, agriculture, or wastewater management, pumps play a crucial role in the efficient handling of liquids and fluids. Leasing pumps through Canadian Western Bank (CWB) National Leasing offers a practical and financially astute solution to meet diverse operational needs. Here’s how leasing pumps can be a game-changer for your business: 1. Swift Equipment Access Recognizing the critical nature of uninterrupted operations, CWB National Leasing provides a fast and efficient leasing process. With decisions typically made within 48 hours of application, your pumps can be delivered and operational promptly, minimizing downtime and enhancing productivity. 2. Increased Financial Leverage Leasing pumps with CWB National Leasing enhances your financial flexibility. It allows you to conserve capital by choosing periodic payments over a substantial initial outlay, freeing up resources for other essential business activities. Additionally, you can customize your pumps with extra features or accessories for a small payment increase, enhancing their functionality. 3. Balanced Cash Flow Management Manageable lease payments over the term allow your pumps to contribute to your business’s revenue while they’re being paid off. This strategy is key in maintaining a healthy expense-to-revenue ratio, essential for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment plans, including seasonal, semi-annual, or annual options, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments align with your financial capacity. 5. Potential Tax Advantages Leasing pumps can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease pumps through CWB National Leasing is a strategic decision that equips your business with vital equipment while maintaining financial agility. It ensures access to high-quality pumps, crucial for efficient operations across various industries, without the financial burden of a large upfront purchase. This leasing approach enables enhanced operational capabilities, improved efficiency, and increased profitability, helping your business to thrive in its respective field.

Service

In Stock

Service

New

ISO


Junk Mill

JKM Junk Mill

Introducing the JKM Junk Mill from Marlin Oil Tools: The Ultimate Downhole Tool for Efficient Well Intervention and Milling Operations Marlin Oil Tools proudly presents the JKM Junk Mill, a premier downhole tool designed to optimize well intervention jobs by efficiently grinding and removing unwanted objects from the wellbore. Whether you're dealing with intentionally placed equipment such as bridge plugs or facing challenges with emergency lost equipment, the JKM Junk Mill is engineered to handle a variety of downhole obstacles with unmatched efficiency. Key Features of the JKM Junk Mill: Superior Milling Performance: Capable of grinding and washing out any object softer than the mill's cutters, ensuring clean and clear wellbores. Effective Debris Removal: Features multiple flushing holes for drilling fluid circulation, efficiently removing milled particles and cooling the cutting edge. Durable Carbide Construction: Equipped with carbide welded onto the body for robust milling action, available in crushed carbide and various insert designs to suit different milling needs. Customizable Milling Solutions: Offers a range of carbide welding designs including flat, concave, and convex bottoms, as well as top and side carbide surfacing, providing versatility for specific well intervention requirements. Extended Service Life: The durability of the carbide elements depends on the milling conditions, with Marlin Oil Tools providing redress services for worn carbide to ensure continued high performance. Powered by Downhole Motors: Rotation of the mill is performed by a downhole motor, enhancing milling efficiency and effectiveness. Elevate your well intervention strategies with the JKM Junk Mill from Marlin Oil Tools, a cutting-edge solution designed for the efficient removal of downhole obstacles in the oil and gas industry. Featuring advanced milling capabilities, effective debris removal, and durable carbide construction, the JKM Junk Mill ensures your wellbore is free from unwanted materials, enhancing operational efficiency and well productivity. With customizable carbide designs and comprehensive redress services, Marlin Oil Tools provides a versatile and reliable tool for tackling a wide range of milling challenges. Choose the JKM Junk Mill for its superior performance, durability, and adaptability, making it an essential component of your well intervention toolkit. Why Choose the JKM Junk Mill from Marlin Oil Tools? Enhanced Milling Efficiency: Delivers unparalleled performance in grinding down and removing wellbore obstructions. Versatile Application: Adaptable to various well intervention scenarios, from routine cleanouts to emergency equipment retrieval. Long-Term Durability: Constructed with high-quality carbide for extended tool life, even in the most challenging milling operations. Tailored to Your Needs: Offers customization options to match your specific well intervention requirements, maximizing tool effectiveness. The JKM Junk Mill by Marlin Oil Tools represents the forefront of downhole milling technology, offering oil and gas operators a powerful solution for enhancing well intervention outcomes. Incorporate the JKM Junk Mill into your operations for smoother, more effective wellbore preparation and obstacle management.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Whip SW-RD-01 4 foot

Safe-T-Whip Polyester

Introducing Safe-T-Whip RD-01: The Ultimate Green Safety Restraint for Pipe Connections Safety is at the heart of everything we do at Safe-T-Whip & Restraints Inc., and we are proud to present our latest innovation - the SW-RD-01 Safe-T-Whip Polyester. This revolutionary product is designed to provide reliable safety reinforcement for pipe connections in the oilfield and hydraulic fracturing sites, ensuring the well-being of your personnel and assets, even under extreme conditions. Engineered for Excellence: Our SW-RD-01 is professionally designed, taking into account the extreme pressures, movements, and temperatures experienced in the oilfields and fracking sites. Crafted from the highest grade 1/2" 12-Strand Polyester fiber, this safety whip is built to withstand the harshest environments and challenging weather conditions. With SW-RD-01, you can trust that you're using the most durable, lightweight, and easy-to-use portable pipe restraint available on the market in Canada. Unparalleled Performance: SW-RD-01 is the fastest safety whip to set up and pull down, featuring a single choke and half hitch that can be installed in less than a minute. Its simple yet effective design allows for quick adjustments, ensuring compliance with site safety regulations and saving valuable time for operators. The lightweight construction of our product makes it easy to haul around, adding to its appeal among rig hands and operators. Rust-Free, Impervious, and Lightweight: Unlike traditional metal restraints, SW-RD-01 is made from a light-weight 12-strand Polyester fiber specifically designed for 2" to 4" hammer unions. Its non-metallic construction means it will not rust, making it highly durable and impervious to water, oil, and most chemicals. Ropes made from this synthetic polyester material are as strong as steel-wire ropes but significantly lighter, making them easier to handle, store, and haul. This not only saves time and effort but also contributes to cost savings for operators. A Safety Net You Can Rely On: When it comes to the safety of your personnel and equipment, there's no room for compromise. SW-RD-01, with its sturdy and reliable design, significantly restricts the lateral "whip" movement of any pipe whose joint fails under pressure. It acts as a crucial safety net, providing peace of mind to operators and ensuring the well-being of everyone on the job. Green for Safety: SW-RD-01 is easily identifiable by its vibrant green color, representing the commitment to safety that Safe-T-Whip & Restraints Inc. stands for. This distinct color makes it easily recognizable on the worksite, helping to emphasize safety protocols and promote a culture of security and responsibility. Make Safety a Priority: When it comes to restraining pipe connections, SW-RD-01 is the product you can trust. Its exceptional performance, easy setup, and durable construction make it the go-to safety whip for operators in the oilfield and hydraulic fracturing industry. Invest in Safe-T-Whip Polyester - your reliable partner in safety and compliance. Choose SW-RD-01 and ensure your operations are protected by the best safety restraint system on the market. With Safe-T-Whip & Restraints Inc., safety is always in your hands.

Buy

In Stock

Product & Service

New

API

Air Freight


Panel cutters Leasing

Streamline Your Production with Panel Cutter Leasing from CWB National Leasing Enhancing Your Manufacturing Precision and Efficiency with Advanced Equipment Solutions For businesses involved in woodworking, construction, or any industry requiring precise panel cutting, having reliable and efficient panel cutters is crucial for maintaining productivity and quality. Leasing panel cutters through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially astute solution for businesses seeking to upgrade their cutting capabilities. Here’s how leasing panel cutters can benefit your business: 1. Quick Access to High-Precision Cutting Equipment CWB National Leasing values the efficiency of your production processes and offers a rapid leasing process. Decisions are typically made within 48 hours of your application, ensuring that your panel cutters can be delivered and operational quickly. This swift service minimizes downtime and enhances your production capacity, allowing you to meet project deadlines and customer demands more effectively. 2. Increased Financial Flexibility Leasing panel cutters with CWB National Leasing boosts your buying power. It allows you to free up capital by opting for periodic payments over a significant initial purchase. The flexibility to add extra features or accessories to your panel cutters for a small payment increase allows for customization to meet specific production demands. 3. Effective Cash Flow Management Manageable lease payments over the term mean your panel cutters start contributing to your business’s revenue while still being paid off. This approach helps maintain a healthy expense-to-revenue ratio, which is key for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing panel cutters can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease panel cutters through CWB National Leasing is a strategic decision that equips your business with essential cutting equipment while maintaining financial agility. It ensures access to high-quality panel cutters, vital for precise and efficient cutting operations, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business to excel in its respective industry.

Service

In Stock

Service

New

ISO


WR-SCSSSV FRN 2-7/8 inch

WR-SCSSSV FRN

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Plug Chokes for Tubing

Downhole Tools

Elevate Downhole Efficiency with HOCA Oil Tools' Plug Chokes for Tubing In the rapidly evolving landscape of the oil and gas industry, achieving optimal control and efficiency in downhole operations is crucial. HOCA Oil Tools, at the forefront of downhole technology innovation, introduces its Plug Chokes for Tubing – specialized tools designed to revolutionize fluid flow control within the wellbore. Crafted with precision and built to meet the highest industry standards, our Plug Chokes are engineered to enhance the performance and safety of downhole operations. HOCA’s Plug Chokes for Tubing: Precision Control, Unmatched Durability Our Plug Chokes for Tubing are designed for operators who demand precise fluid flow control in their downhole operations. These tools are crucial for managing production rates, minimizing fluid losses, and optimizing well performance. Constructed from high-grade materials resistant to corrosion and wear, HOCA's Plug Chokes ensure reliability and durability under the harshest downhole conditions. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Plug Chokes for Tubing means choosing a solution that stands for innovation, efficiency, and reliability. Our commitment to excellence ensures that our products not only meet but exceed the demands of modern oilfield operations, providing our clients with tools that enhance their downhole success. Integrating our Plug Chokes into your downhole operations marks a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a strategic partner committed to supporting your operational challenges with advanced solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Plug Chokes for Tubing. Partner with us, and take your downhole operations to new heights of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards for reliability, control, and performance in the challenging oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Market Research

Software Development

Eleks in Toronto

More information

ELEKS Market Research Services: Unlocking Opportunities Through Insight In today's dynamic business landscape, success hinges on staying ahead of the curve. With ELEKS Market Research Services, we offer you the keys to unlock new sources of revenue, capitalize on untapped niches, and make informed decisions that drive your business forward. ELEKS Market Research Services: Unveiling the Possibilities Assess the Competition: Navigate the competitive landscape with confidence. Our market research experts conduct a comprehensive analysis, revealing your rivals' strengths and weaknesses. Armed with this insight, you can protect your market share and fortify your position against challengers. Access New Markets: Venture into uncharted territories with the guidance of industry veterans. Drawing from years of diverse expertise, we help you uncover new markets, analyze their potential, and mitigate risks. Make your entry smoother, backed by data-driven strategies. Build Better Strategy: Craft strategies that resonate with your target audience. Our custom market research services provide insights into current demand and competitor tactics. Harness this knowledge to identify growth opportunities and pave your path to success. Improve Your Product: Bring products that customers truly crave. ELEKS assists in understanding market demand through rigorous market sizing research. This ensures your development aligns with real-world user needs, increasing the effectiveness of market penetration and garnering investment. Pre-empt Challenges: Stay ahead of industry trends, risks, and challenges. ELEKS' global market research services offer insights into the ever-evolving landscape. Armed with this knowledge, you can proactively strategize to tackle challenges head-on. ELEKS Market Research Services: Beyond the Horizon Requirements Analysis: We immerse ourselves in understanding your unique business needs. Through a meticulous requirements analysis, we define data sources and provide accurate timeframes and budgets tailored to your vision. Data Gathering and Analysis: Our experts gather and dissect data from credible sources specific to your industry. This comprehensive approach ensures a holistic understanding of market dynamics. Report Delivery: Translating raw data into actionable insights is our specialty. We present our findings in well-structured, easy-to-interpret documents. These insights serve as the foundation for your future roadmap, fueling your strategy with real-world knowledge. ELEKS Market Research Services: Enabling Informed Decisions In an era where innovation defines success, make ELEKS your partner in transforming data into opportunities. Elevate your decision-making, penetrate new markets, and dominate your industry with insights that drive growth. Illuminate your path to success with ELEKS Market Research Services.

Service

Made to Order

Service

New

ISO


Scales Leasing

Streamline Your Logistics with Trucking Scale Leasing from CWB National Leasing Elevating Your Transportation and Logistics Efficiency with Smart Equipment Solutions For businesses in the transportation, logistics, and warehousing industries, accurate and reliable trucking scales are indispensable for efficient operations. Leasing trucking scales through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and efficient solution for your weighing needs. Here’s how leasing trucking scales can transform your logistics and transportation operations: 1. Rapid Equipment Accessibility Understanding the urgency of maintaining streamlined logistics, CWB National Leasing provides a fast and efficient leasing process. With lease decisions typically made within 48 hours, your trucking scales can be delivered and operational swiftly, minimizing downtime and enhancing your operational efficiency. 2. Enhanced Financial Flexibility Leasing trucking scales with CWB National Leasing boosts your financial leverage. It enables you to conserve capital by opting for manageable periodic payments instead of a significant upfront investment, freeing up resources for other essential business activities. Moreover, the option to add extra features or accessories to your scales for a small payment increase allows for customization to meet specific business requirements. 3. Effective Cash Flow Management With smaller lease payments spread over the term, your trucking scales start contributing to your business’s revenue while they're being paid off. This balanced financial approach helps maintain a healthy expense-to-revenue ratio, which is crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is especially beneficial for businesses with seasonal or variable income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Advantages Leasing trucking scales can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease trucking scales through CWB National Leasing is a strategic decision that provides your business with essential weighing equipment while maintaining financial agility. It ensures access to high-quality trucking scales, crucial for accurate load management and compliance, without the financial strain of a large upfront purchase. This leasing approach enables enhanced operational efficiency, improved accuracy in logistics, and increased profitability, helping your business to excel in the competitive transportation and logistics industry.

Service

In Stock

Service

New

ISO


Broaching Tool Runs

InWaTec Combined: Precision Perfected with Our Broaching Tool Running Services In the complex tapestry of well service operations, precision is not just a goal—it's a necessity. At InWaTec Combined, we infuse this precision into every aspect of our work, especially when it comes to preparing wellbore tubing for subsequent interventions. Our Broaching Tool Running services epitomize this commitment, ensuring that wellbore tubings are in optimal condition for running or pulling service tools. The Critical Role of Broaching The wellbore is the heart of any drilling operation, and like any heart, it must be free from obstructions to function correctly. Enter the broach—InWaTec Combined’s answer to the industry's need for flawless tubing surfaces. Our broaching tools are engineered to meticulously remove metal burrs and imperfections that could jeopardize the integrity of service operations. By ensuring a clean and smooth tubing wall, we set the stage for efficient and trouble-free servicing. Advanced Broaching Technology Our broaching tools are not just tools; they are precision instruments. Equipped with graduated rings, diamonds, or segments, our broaches are case-hardened to withstand the rigors of the well environment. Their highly sharpened edges are designed to cut through imperfections with surgical precision, leaving behind a surface that meets the industry's highest standards. The InWaTec Combined Edge When you choose InWaTec Combined for broaching tool running services, you're not just getting a service; you're acquiring a partnership that values excellence. We understand that the quality of broaching directly impacts the success of your subsequent operations. That's why we've invested in developing a team of experts and a fleet of tools that stand unrivaled in quality and performance. Ensuring Success Down the Line Our broaching service is a critical precursor to a variety of downhole operations. By preparing your tubing with our broaching tools, you are ensuring that subsequent tools can be run or pulled with minimal risk of snagging or damage, thus preserving the integrity of your operations. This not only saves time but also reduces the likelihood of costly interruptions. Your Assurance of Quality At InWaTec Combined, our reputation is built on the back of our commitment to quality and precision. Our broaching tool running services are a testament to this promise. We don’t just deliver a service—we ensure that your wellbore is in the best possible condition for whatever comes next. In conclusion, with InWaTec Combined's Broaching Tool Running services, you can rest assured that the critical first step in your well servicing operations is in the most capable hands. Our precision tools and expert operators stand ready to deliver a seamless service experience that sets a solid foundation for your well's longevity and productivity.

Service

In Stock

Service

New

API

Land Freight


Plug with Removable Mandrel

Downhole Tools

HOCA Oil Tools: Revolutionizing Downhole Solutions with Plug with Removable Mandrel In the challenging and fast-paced environment of the oil and gas industry, having tools that are both reliable and versatile is crucial for the success of downhole operations. At HOCA Oil Tools, we understand these challenges and are proud to introduce our innovative Plug with Removable Mandrel, designed to provide unparalleled flexibility and efficiency in a wide range of downhole applications. HOCA’s Plug with Removable Mandrel: Engineered for Versatility and Performance Our Plug with Removable Mandrel stands out as a superior downhole solution, offering the unique advantage of a detachable mandrel. This feature allows for various configurations and uses, adapting to different operational requirements and challenges faced in the wellbore. Built with precision engineering and high-quality materials, the Plug with Removable Mandrel is designed to withstand the harsh conditions of downhole environments, ensuring reliability and longevity. Experience the Difference with HOCA Oil Tools Opting for HOCA Oil Tools’ Plug with Removable Mandrel means choosing a solution that embodies innovation, efficiency, and reliability. Our commitment to quality and customer satisfaction ensures that our products not only meet but exceed the demands of modern downhole operations. By incorporating our Plug with Removable Mandrel into your downhole toolkit, you are taking a step towards more flexible, efficient, and cost-effective well management. With HOCA Oil Tools, you gain more than just a product; you gain a partner dedicated to your success, providing state-of-the-art solutions and comprehensive support. Choose HOCA Oil Tools for your downhole needs and harness the advantages of our Plug with Removable Mandrel to streamline your operations and enhance your operational success. Partner with us and take your downhole operations to new levels of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards in the industry and drive success in the challenging landscape of oil and gas extraction.

Buy

In Stock

Product & Service

New

API

Air Freight


Partnered with Qualys

Cybersecurity

ALCiT in Mississauga

More information

Fortify Your Datacenter with ALCiT's Qualys Partnership In the realm of datacenter security, the challenge is immense, but the stakes are even higher. ALCiT stands proudly beside Qualys, the trusted sentinel safeguarding 19,000 global businesses across 130 countries. Our partnership with Qualys redefines how you protect, monitor, and enhance your datacenter security, ensuring that vulnerabilities are addressed and threats are thwarted. Qualys: The Shield of Data Security In a world where data is the currency of progress, Qualys reigns as the fortress of protection. Trusted by global businesses and backed by relentless innovation, Qualys has earned its place as the defender of data integrity. ALCiT's partnership with Qualys brings this unrivaled protection to your datacenter. Your Datacenter: Safeguarded, Simplified, Strengthened Comprehensive Inventory: Every asset in your datacenter is meticulously cataloged and kept up-to-date. With Qualys, you gain clarity and control over your infrastructure like never before. Bug Extermination Made Easy: Say goodbye to breaches. Qualys empowers you to effortlessly detect and eliminate bugs that may compromise your datacenter's security. Real-Time Monitoring, Rapid Alerts: The digital landscape evolves, and so should your security. Qualys offers continuous network monitoring, promptly alerting you to any changes that demand attention. Prioritize Threats with Precision: Not all threats are equal. Qualys equips you with the ability to prioritize threats based on their criticality, ensuring that you tackle the most pressing vulnerabilities first. File Validation, Compliance Assured: Compliance isn't a choice; it's a necessity. Centralized file change logging allows you to adhere to compliance standards while maintaining a secure environment. Uncover Stealthy Malware: Malware often lurks in shadows. Qualys' vigilant system flags malware that might evade other defenses, ensuring your datacenter remains a fortress. Unlock Datacenter Security Excellence Today ALCiT's Qualys partnership isn't just a collaboration; it's your key to fortified datacenter security. Experience the power of innovation and protection that safeguards your digital assets and preserves your business's integrity. Experience the power of ALCiT's partnership with Qualys.

Service

Made to Order

Service

New

ISO


Racking Leasing

Maximize Your Storage Efficiency with Racking Leasing from CWB National Leasing Transforming Your Space Management with Flexible and Cost-Effective Solutions For businesses in warehousing, retail, or any sector requiring organized storage solutions, efficient racking systems are vital for maximizing space and streamlining operations. Leasing racking systems through Canadian Western Bank (CWB) National Leasing offers a flexible, financially sensible solution for businesses looking to enhance their storage capabilities. Here’s how leasing racking can benefit your business: 1. Rapid Access to Customized Storage Solutions CWB National Leasing recognizes the importance of effective space management in your business. They provide a quick and efficient leasing process, with decisions typically made within 48 hours of your application. This ensures that your racking systems can be delivered and set up quickly, allowing you to optimize your storage space without significant delays. 2. Increased Financial Flexibility Leasing racking systems with CWB National Leasing boosts your financial power. By choosing periodic payments over a large upfront purchase, you free up capital for other critical business investments. The option to add extra features or accessories to your racking systems for a small payment increase allows for customization to meet your specific storage needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your racking systems start contributing to your business’s efficiency while still being paid off. This approach helps maintain a healthy balance between expenses and revenue, crucial for the financial stability and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing racking systems can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease racking systems through CWB National Leasing is a strategic decision that equips your business with essential storage solutions while maintaining financial agility. It ensures access to high-quality racking systems, crucial for efficient space management and operational organization, without the financial strain of a large upfront investment. This leasing approach enables enhanced storage efficiency, improved inventory management, and increased profitability, helping your business to excel in its respective market.

Service

In Stock

Service

New

ISO


Dozers Leasing

Boost Your Construction Capabilities with Dozer Leasing from CWB National Leasing Empower Your Construction Projects with Flexible Equipment Solutions For any construction business, having the right equipment like dozers is essential for efficiency and success. Leasing your dozer through Canadian Western Bank (CWB) National Leasing provides a strategic and financially savvy solution that aligns perfectly with the needs of your construction projects. Here's why leasing a dozer through CWB National Leasing is a smart move for your business: 1. Rapid Equipment Acquisition CWB National Leasing understands the importance of time in the construction industry. They offer a streamlined leasing process, often approving applications within 48 hours. This means you can expect your dozer to be delivered and ready for use shortly after approval, reducing downtime and keeping your projects on schedule. 2. Enhanced Buying Power Leasing a dozer with CWB National Leasing boosts your purchasing capacity. It allows for periodic payments instead of a hefty initial investment, freeing up capital for other aspects of your business. Additionally, you can customize your dozer with extra features or accessories for a minimal increase in your payment, enhancing its functionality and efficiency. 3. Effective Cash Flow Management With manageable lease payments spread over the lease term, your dozer starts to contribute to your revenue even as you pay for it. This balanced approach helps maintain a healthy expense-to-revenue ratio, crucial for the financial health of your business. 4. Flexible Payment Structures CWB National Leasing offers payment plans that can be tailored to your business’s revenue cycle, including seasonal, semi-annual, or annual options. This flexibility is especially beneficial for construction businesses, where income can vary based on project timelines and seasons. 5. Potential Tax Advantages Leasing may provide tax benefits, as it allows you to expense lease payments instead of depreciating the capital cost of the dozer. Consulting with a tax advisor can help you understand how leasing can optimize your business’s tax situation. Conclusion Choosing to lease your dozer through CWB National Leasing is a strategic decision that enables your construction business to utilize essential equipment while maintaining financial flexibility. It ensures that you have the necessary tools for your projects without the burden of a large upfront investment, paving the way for growth, efficiency, and profitability in the competitive construction sector.

Service

In Stock

Service

New

ISO


Surface Heater

Electric Heater

Introducing Sivam's Electric Heater Units: The Solution for Improved Oil Flow! Our cutting-edge technology is designed to increase the temperature of oil, resulting in reduced viscosity and improved oil flow. It's the perfect solution for industries that require consistent and efficient heating for their oil-based applications. Sivam's Electric Heater Units are built with durability and reliability in mind. Our state-of-the-art technology ensures that your oil is heated to the perfect temperature quickly and efficiently, with minimal energy consumption. This means you can enjoy the benefits of improved oil flow while also saving on energy costs. Our Electric Heater Units are specifically designed to improve the flow of your oil, regardless of its viscosity. With our units, you can maintain consistent oil temperatures throughout your system, ensuring optimal performance and efficiency. This is especially important for industries such as oil and gas, where maintaining consistent oil temperatures is critical to operations. At Sivam, we pride ourselves on providing exceptional customer service and support. Our team of experts is always available to assist you with any questions or concerns you may have, ensuring that you get the most out of your Electric Heater Unit. In addition to their efficiency and reliability, Sivam's Electric Heater Units are also built with safety in mind. Our units are equipped with advanced safety features to ensure that your employees and equipment are protected at all times. Overall, Sivam's Electric Heater Units are the perfect solution for industries that require improved oil flow and consistent oil temperatures. With their cutting-edge technology, reliability, and safety features, you can trust that Sivam's Electric Heater Units will exceed your expectations. Contact us today to learn more about how our Electric Heater Units can benefit your business.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


3.25 inch WI Valve

Water Injection Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Sea Freight


Safe-T-Whip HD-01 5’-6”

Heavy Duty Whip

Introducing Safe-T-Whip HD-01 5’-6”: The Pinnacle of Heavy Duty Safety Restraints At Safe-T-Whip & Restraints Inc., safety is not just a priority; it's our passion. We are thrilled to unveil our most powerful safety restraint yet - the SW-HD-01 Safe-T-Whip HD. Engineered for heavy-duty applications, this safety whip is designed to provide unparalleled protection and reliability in the most demanding oilfield environments. Unmatched Heavy-Duty Design: Identified by its striking red color and accompanied by an orange tag, SW-HD-01 Safe-T-Whip HD is crafted from robust 3/4" 12-Strand HMPE fiber, earning its name as a "Heavy Duty" (HD) safety restraint. This formidable whip is built for use on 3-inch 1502 hammer union pipelines up to an astounding 15,000psi or 4-inch iron up to 10,000psi. When it comes to restraining high-pressure flowlines in extreme conditions, trust Safe-T-Whip HD-01 to deliver unmatched performance. Redefining Heavy-Duty Safety: Safe-T-Whip HD-01 is designed to withstand the toughest challenges that the oilfield can throw its way. With its heavy-duty construction, this safety restraint offers maximum reliability and protection, even under high-pressure circumstances. The high strength of 3/4" 12-Strand HMPE fiber ensures your team's safety is never compromised. Exceptional Performance, Uncompromising Safety: When it comes to restraining heavy-duty pipelines, Safe-T-Whip HD-01 stands in a league of its own. Its superior strength and durability make it an essential asset for oilfield operations. The bright red color and orange tag make it easily recognizable, emphasizing the importance of safety on your worksite. Designed for the Toughest Conditions: The Canadian oil patch presents unique challenges and demanding drilling environments. Safe-T-Whip HD-01 is built to thrive in these extreme conditions. Its ability to resist pressure hosing and imperviousness to corrosion, oil spills, and most chemicals ensure that it remains effective and reliable, no matter the conditions. Certified and Tested for Quality: We understand that your safety is paramount, and that's why every Safe-T-Whip HD-01 undergoes rigorous testing to meet the highest industry standards. Our commitment to quality and excellence ensures that you receive a safety restraint system you can trust. Your Partner in Safety: When it comes to heavy-duty safety restraints, Safe-T-Whip & Restraints Inc. is your trusted partner. Invest in SW-HD-01 Safe-T-Whip HD to safeguard your workforce, equipment, and operations, ensuring compliance with safety regulations and providing peace of mind. Take Safety to the Next Level: Safe-T-Whip HD-01 5'-6" is the pinnacle of heavy-duty safety restraints. Trust in the power of Safe-T-Whip HD to protect your team and assets in high-pressure environments. With Safe-T-Whip & Restraints Inc., your safety is always secured.

Buy

In Stock

Product & Service

New

API

Air Freight


Shear Up Pulling Tools for External Fishing Necks

Downhole Tools

Elevate Downhole Operations with HOCA Oil Tools' Shear Up External Fishing Neck Pulling Tools In the demanding environment of oil and gas extraction, operational efficiency and equipment reliability are paramount. At HOCA Oil Tools, we understand these challenges and are dedicated to providing solutions that enhance downhole operations. Our Shear Up External Fishing Neck Pulling Tools are designed to revolutionize the retrieval of downhole equipment, ensuring a seamless operation and enhancing well productivity. HOCA's Shear Up External Fishing Neck Pulling Tools: Engineered for Superior Performance Our Shear Up External Fishing Neck Pulling Tools are specifically engineered for the safe and efficient retrieval of downhole equipment featuring external fishing necks. These tools are indispensable for operators seeking to enhance operational efficiency and safety. Crafted with precision and built from high-grade materials, our Shear Up Pulling Tools are designed to withstand the harsh conditions of the downhole environment, ensuring reliability and durability in every operation. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are committed to excellence and innovation in every product we offer. Our Shear Up External Fishing Neck Pulling Tools epitomize this commitment, providing operators with a reliable solution for the retrieval of downhole equipment. By integrating our tools into your downhole operations, you gain not just a product but a partner dedicated to enhancing your operational success. With HOCA Oil Tools, you can expect products that not only meet industry standards but exceed them, ensuring your operations run smoothly, safely, and efficiently. Our Shear Up Pulling Tools are a testament to our dedication to quality, performance, and customer satisfaction. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied customers who rely on our Shear Up External Fishing Neck Pulling Tools to elevate their downhole operations. Partner with us, and unlock the full potential of your downhole activities with tools designed for success. With HOCA Oil Tools, elevate your operational capabilities and embrace a future of enhanced efficiency, safety, and cost-effectiveness in downhole operations.

Buy

In Stock

Product & Service

New

API

Air Freight


Streamlined International Payments and Receipts

Foreign Exchange Business Services

Expand Your Global Business Horizons with Dunbridge Financial: Streamlined International Payments and Receipts As a thriving global business, you understand the importance of efficient and cost-effective international transactions. Say goodbye to complexities and uncertainties with Dunbridge Financial's comprehensive Business Services. We empower you to take advantage of foreign exchange opportunities, manage multiple currencies effortlessly, and benefit from personalized concierge customer service. One Platform, Limitless Possibilities At Dunbridge Financial, we believe in simplifying your international business operations. Our elegant platform is designed to cater to all your needs, from collecting and managing foreign currencies to making secure international payments. Embrace the convenience of handling your global finances from a single platform, eliminating the need for multiple systems. Concierge Customer Service - Your Dedicated Business Partner Our commitment to customer satisfaction goes beyond transactional interactions. With Dunbridge Financial, you get more than just a service; you gain a dedicated business partner. Experience how we embed with our customers to understand their unique needs and develop a tailored payment strategy that suits your business objectives. Each customer is assigned a dedicated account manager, ensuring that you receive personalized support every step of the way. Fast and Secure International Payments Speed and security are the cornerstones of our international payment services. Benefit from our global banking relationships, allowing you to make cost-effective payments to over 100 currencies and 120 countries. Rest assured that your financial information is safeguarded with our market-leading platform, compliant with ISO27001. Multi-Currency Accounts for Seamless Transactions Managing multiple currency balances has never been easier. With Dunbridge Financial, you can receive and manage funds in your company's name, all within a single account. Enjoy the convenience of receiving like a local with real accounts featuring IBAN, ACH, and SEPA capabilities. When needed, effortlessly transfer funds between currencies, maximizing your financial flexibility. Mass Payments - Efficiency at Its Finest Time is money, and we value both for your business. Our Mass Payments feature allows you to upload, manage, and pay up to 1000 payees at a time. Streamline your Accounts Payable processes, saving time and effort while ensuring accuracy and promptness in every transaction. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider; we are your dedicated partner in driving your international business growth. When you choose us, you gain access to: • Expert guidance and personalized support from our dedicated account managers • Secure, compliant, and efficient global banking relationships for seamless transactions • Cutting-edge technology that simplifies complex financial processes Join Us Today and Embrace Global Business Success Unlock the full potential of your global business with Dunbridge Financial. Sign up for your free global business account within 24 hours and experience the ease of managing all your international payments and receipts from one elegant platform. Take the complexity out of your FX payment strategy, optimize your financial efficiency, and elevate your international business endeavors with confidence. Empower your global business horizons with Dunbridge Financial. Sign up now and open the door to a world of limitless possibilities. Take your business to new heights with streamlined international transactions, personalized customer service, and unwavering financial support.

Service

Made to Order

Service

New

ISO

Air Freight


Surface Controlled Subsurface Safety Valve FXE 2-3/8 inch

FXE WR-SCSSSV

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Partnered with veeam

Cybersecurity

ALCiT in Mississauga

More information

Unlock Data Protection Excellence with ALCiT's Veeam Partnership In the ever-evolving landscape of data protection, one name reigns supreme: Veeam. Over the past decade, Veeam has transcended from a niche player to a dominant force in the realm of backup solutions. However, at ALCiT, we understand that backups are only half the story – it's the restores that truly matter. What good is a backup if you can't restore it swiftly and flawlessly? Veeam: The Vanguard of Restoration Veeam's journey is one of evolution and innovation. From being a niche contender to becoming the go-to for backup solutions, Veeam has become synonymous with data protection. At ALCiT, we proudly unite with Veeam, focusing on what truly matters – seamless, rapid restoration. ALCiT and Veeam: Fortifying Your Data Assets Backup as a Service (BaaS): With ALCiT, you can now breathe easy. Tell us your restoration needs, and we'll handle the rest – from hardware to software and vigilant monitoring. Your peace of mind is our mission. CloudBackup Redefined: Data security knows no bounds. ALCiT's partnership with Veeam extends to safeguarding your data off-site, in a secure Canadian datacenter. Your data's sanctuary is our promise. Office 365: Protecting What Matters: Microsoft's service agreement might not cover data protection, but ALCiT does. Don't gamble with your data – our Office 365 backup solution ensures your valuable information is never compromised. Disaster Recovery as a Service (DRaaS): In the realm of data protection, disaster recovery is a cornerstone. ALCiT's DRaaS complements our BaaS offering, ensuring that your data remains resilient even in the face of adversity. Guardian of Your Data's Destiny Your data's protection and restoration are not just tasks; they're our commitment. With ALCiT's Veeam partnership, experience data protection that transcends uncertainty and empowers your digital future. Secure Your Data's Future Today ALCiT's partnership with Veeam isn't just a collaboration; it's a commitment to your data's integrity.

Service

Made to Order

Service

New

ISO


Bilge Absorbent Boom

Bilge Oil Absorber absorbs oil leaks from the engine and/or dripping oil

OilHungry in Stoney Creek

More information

OH-BGE Bilge Absorbent Boom is engineered to address the specific challenges of oil accumulation in the bilge, arising from engine leaks and oil changes. With its unique design and technical specifications, this product is your ally in safeguarding the environment. Technical Specifications: Part Number: OH-BGE Product Type: Absorbent Bilge Fluids Absorbed: Oil-Based Liquids Volume Absorbed per Unit: 1.59 gallons Color/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Neutralizing: No Floating: Yes UV Resistant: No Size: 10” x 44” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes Applications: • Marine vessels • Boats • Oil-powered machinery In the maritime tapestry where vessels traverse vast waters, a silent guardian emerges—the OH-BGE Bilge Absorbent Boom. Beyond its utilitarian role, this product narrates a story of efficiency, environmental consciousness, and unwavering commitment to technical excellence. Can is known for its testament to precision in oil cleanup. Meticulously crafted, it targets oil floating in the bilge, whether a result of engine leaks or the aftermath of oil changes. A Polypropylene Filler ensures optimal absorption, leaving the bilge spotless and safeguarding marine environments from potential contamination. Very handy to learn that the OH-BGE, equipped with an integrated loop of rope, effortlessly finds its place in the bilge. This seamless application isn't merely convenient; it's a strategic move to efficiently absorb oil before water circulates back to the ocean, lake, or river. Choosing the OH-BGE isn't merely a cleanup decision; it's a commitment to safeguarding our waters. This absorbent boom becomes a catalyst for environmental protection, actively contributing to the preservation of aquatic ecosystems. With every use, it signifies a pledge to a cleaner and more sustainable maritime future. the OH-BGE becomes an investment in environmental stewardship. It transcends being a product and emerges as a strategic choice for compliance with rigorous environmental regulations. This proactive step shields against potential fines tied to oil pollution, aligning fiscal prudence with ecological responsibility. OH-BGE orchestrates a symphony of technical prowess. Tailor-made with a specific size of 10” x 44” and an impressive volume absorption of 1.59 gallons per unit, it becomes an exemplar of efficient and targeted oil cleanup in the bilge. This isn't just a boom; it's a harmonious blend of technical excellence and environmental responsibility. Choose OH-BGE – where every ripple narrates a tale of environmental stewardship.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Hydrostatic Bailers

InWaTec Combined: Enhancing Wellbore Clarity with Advanced Hydrostatic Bailer Services In the diverse and demanding world of well servicing, maintaining a clear and functional wellbore is essential for the efficient operation of drilling rigs, workover operations, and production wells. InWaTec Combined stands at the forefront of this vital service with our Hydrostatic Bailer running services, offering a sophisticated solution to the age-old challenge of collecting solids and cleaning the wellbore. The Necessity of Hydrostatic Bailer Operations Hydrostatic Bailers are an integral component in the suite of tools required for effective well maintenance. The principle behind these tools is simple yet ingenious—they utilize the pressure differential created by the well fluid to draw debris into the bailer, effectively removing it from the wellbore. This operation is crucial, as it ensures that the wellbore is free from obstructions that could hinder subsequent interventions or impede production. Versatile Solutions for Onshore and Offshore Operations Whether dealing with onshore wells nestled in the heart of a bustling oil field or offshore platforms braving the open seas, InWaTec Combined’s Hydrostatic Bailer services are designed to adapt to any environment. Our tools and techniques are as versatile as they are effective, ensuring that no matter the location, the cleanliness and functionality of the wellbore can be maintained to the highest standards. Technology-Driven Efficiency InWaTec Combined’s commitment to technological innovation is embodied in our Hydrostatic Bailer services. By employing the latest advancements in well servicing technology, we provide a more efficient and reliable means of wellbore cleaning. This not only optimizes the bailing process but also translates into significant time and cost savings for our clients. Prioritizing Safety and Environmental Stewardship Safety and environmental protection are paramount in all of InWaTec Combined’s operations. Our Hydrostatic Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of responsible operations, especially in sensitive onshore and offshore locations. Your Partner in Operational Excellence Choosing InWaTec Combined for your Hydrostatic Bailer needs means partnering with a company that is dedicated to excellence. Our Hydrostatic Bailer running services are a testament to our commitment to providing solutions that are not just effective but also enhance the safety and efficacy of your well operations. Conclusion: Clarity in Every Operation In conclusion, InWaTec Combined’s Hydrostatic Bailer services represent an essential component in the well servicing toolkit. With our focus on precision, efficiency, safety, and environmental responsibility, we ensure that your wellbore cleaning operations are performed to the highest standards. Trust InWaTec Combined to deliver clear solutions for your wellbore challenges, ensuring the uninterrupted success and productivity of your operations.

Service

In Stock

Service

New

API

Land Freight


LANAI Remote Operated Vehicle

ROV

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability At Poseidon Robotics, we understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Sand Pump Bailer

Downhole Tools

Streamline Wellbore Cleanout with HOCA Oil Tools' Sand Pump Bailers In the fast-paced and ever-evolving oilfield industry, efficiency and reliability are paramount. HOCA Oil Tools, a leader in innovative downhole solutions, introduces the Sand Pump Bailer – a cutting-edge tool designed for the effective cleanout of sand, debris, and other obstructions from wellbores. This essential tool is part of our comprehensive range of downhole slick line tools, engineered to enhance the safety and efficiency of your operations. Innovative Solutions for Complex Challenges: The Sand Pump Bailer The HOCA Sand Pump Bailer is specifically designed to address the challenges associated with sand and debris accumulation in the wellbore. Utilizing a simple yet effective mechanism, it allows for the removal of obstructive materials, ensuring a clear path for production and extending the life of the well. Constructed with high-quality materials, the Sand Pump Bailer withstands the harsh downhole environment, delivering consistent performance and durability. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are committed to delivering solutions that meet the unique needs of the oil and gas industry. Our Sand Pump Bailers embody this commitment, providing an efficient, safe, and cost-effective solution for wellbore cleanout challenges. With a focus on innovation, quality, and customer service, we ensure that our tools not only meet but exceed the expectations of our clients. Incorporate HOCA's Sand Pump Bailers into your downhole operations and experience a new standard of efficiency and reliability. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your wellbore operations. Leverage the power of advanced downhole solutions with HOCA Oil Tools. Our Sand Pump Bailers are more than just tools – they are partners in your operational success, ensuring that your wells remain productive, safe, and free from obstructions.

Buy

In Stock

Product & Service

New

API

Air Freight


Paint booths Leasing

Enhance Your Automotive or Manufacturing Business with Paint Booth Leasing from CWB National Leasing Boosting Quality and Efficiency in Your Painting Operations For businesses in the automotive, manufacturing, or furniture sectors, a high-quality paint booth is critical for ensuring top-notch painting and finishing. Leasing paint booths through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and efficient solution for your painting needs. Here’s how leasing paint booths can significantly benefit your business: 1. Fast Access to Advanced Equipment CWB National Leasing understands the importance of having the right equipment promptly. They offer a quick leasing process, typically making decisions within 48 hours of your application. This rapid turnaround means your paint booths can be delivered and operational quickly, enhancing the quality and efficiency of your painting processes. 2. Increased Purchasing Power Leasing paint booths with CWB National Leasing allows you to leverage your financial resources more effectively. By opting for periodic payments over a significant initial purchase, you free up capital for other crucial aspects of your business. The option to add extra features or accessories to your paint booths for a small payment increase also allows for customization to meet specific operational needs. 3. Effective Cash Flow Management Smaller lease payments over the term mean your paint booths start contributing to your business’s revenue while still being paid off. This approach helps maintain a balanced expense-to-revenue ratio, crucial for the financial health and growth of your business. 4. Flexible Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s revenue cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Advantages Leasing paint booths can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Choosing to lease paint booths through CWB National Leasing is a strategic move that equips your business with essential equipment while maintaining financial agility. It ensures access to state-of-the-art paint booths, vital for delivering high-quality finishes, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved product quality, and increased profitability, helping your business to excel in the competitive automotive or manufacturing market.

Service

In Stock

Service

New

ISO


Wireline Stems

Stems

Elevating Downhole Precision: HOCA Oil Tools B.V.'s Slickline Stem Solutions In the intricate arena of oil and gas extraction, downhole operations necessitate tools that promise not only precision but also unwavering reliability. HOCA Oil Tools B.V. takes pride in offering a sophisticated range of slickline stems that cater to a myriad of operational needs, ensuring unmatched performance and safety. Our expertise in crafting these essential tools is evident from the wide array of slickline stems available, designed to enhance the efficiency and safety of wireline operations. Benefits of Using HOCA's Slickline Stems: Enhanced Downhole Control: Our stems provide the necessary weight to ensure smooth and controlled movements of the tool string within the wellbore, enhancing operational precision. Versatility for Various Applications: From standard solid bars to specialized options like lead or tungsten filled, our range caters to different well conditions and requirements. Optimized Performance: The added weight helps counteract wellbore pressure, improving the impact and effectiveness of downhole tools, particularly in jarring operations. Increased Safety: Proper use of slickline stems reduces the risk of wireline snapping and other operational hazards, ensuring a safer environment for field personnel. Durability in Harsh Conditions: Manufactured with high-quality materials, our stems are designed to withstand the demanding conditions of downhole environments. Customization Options: Available in various sizes and materials, our stems can be tailored to meet the specific needs of each operation, ensuring maximum efficiency and effectiveness. Main Features of HOCA's Slickline Stems: Type ‘A’ Stem (Weight Bar): Offers solid bar configurations ideal for standard operations, providing necessary weight to the tool string with threaded connections for easy integration. Type ‘BO’ Lead Filled Stem: Incorporates lead within the stem to add substantial weight, ideal for deeper or more challenging well conditions, ensuring better control and impact. Type ‘EO’ Roller Stem: Features external rollers to minimize friction and wear during operations, enhancing the stem's longevity and performance in deviated wells. Type ‘ED’ Tungsten Filled Stem: Utilizes tungsten to provide maximum weight in a minimal space, perfect for high-pressure wells where additional downforce is required. Customization and Variety: Our stems are available in various lengths, diameters, and thread connections, ensuring compatibility with different tool strings and operational needs. HOCA Oil Tools B.V.'s commitment to quality and innovation is reflected in our slickline stem offerings. By providing a comprehensive range of sizes, materials, and types, we ensure that our clients have access to the tools necessary for their unique downhole challenges. Trust HOCA for your downhole tool needs, where precision meets durability.

Buy

In Stock

Product & Service

New

API

Air Freight


DAKAR power systems management

Software Development

Eleks in Toronto

More information

Elevate Power Management with DAKAR: The Future of Energy Efficiency At ELEKS, we're committed to revolutionizing the energy industry with innovative software solutions that empower businesses to thrive in the digital age. Introducing DAKAR, our cutting-edge power management system designed to enhance operational efficiency, minimize errors, and transform the way energy is managed. DAKAR has become the preferred choice for numerous European energy producers, distributors, utilities providers, design organizations, and educational institutions, and for good reason. Unleash the Power of DAKAR Seamless Integration: DAKAR seamlessly integrates into any power industry organization, ensuring a smooth transition to advanced power management solutions without disrupting your existing workflows. Comprehensive Capabilities: Experience extensive capabilities for utilities network management, modeling, and planning. DAKAR empowers you to optimize your power networks, ensuring they operate at peak efficiency while adapting to both traditional and renewable energy sources. Enhanced Accuracy and Reliability: With DAKAR by your side, you can elevate the accuracy and reliability of your power systems. Our software empowers you to make informed decisions based on real-time data, leading to reduced errors and improved performance. Real Results, Real Numbers Impressive Customer Base: With a track record of success, DAKAR is trusted by 250 customers across diverse industries. From energy suppliers to educational institutions, businesses worldwide rely on DAKAR for streamlined power management. Leading Ukrainian Energy Suppliers: In Ukraine, where the energy landscape is evolving rapidly, DAKAR stands out as the software of choice for 2/3 of energy suppliers. Its impact on efficiency and productivity is undeniable. 40% Productivity Growth: Businesses using DAKAR have experienced a remarkable 40% growth in productivity. This tangible result speaks volumes about the transformative power of our software in enhancing operational efficiency. ELEKS: Pioneering Energy Innovation For over three decades, ELEKS has been at the forefront of technology and innovation, creating solutions that drive industries forward. DAKAR embodies our commitment to shaping the energy industry for the better, providing unparalleled tools to manage power systems with accuracy and precision. Experience the Future of Power Management Embrace the future of power management with DAKAR by ELEKS. Join the ranks of satisfied customers who have unlocked efficiency, minimized errors, and achieved remarkable growth. Elevate your operational efficiency and take control of your energy systems like never before. With DAKAR, the future is bright, sustainable, and powered by cutting-edge technology.

Service

In Stock

Product & Service

New

ISO


Thru-Tubing MatrixStixx 2 inch

MatrixStixx 3

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Well Stimulation! Are you looking for a quick, efficient, and environmentally friendly solution for acid stimulation? Look no further! StimStixx Technologies presents Thru-Tubing Acid Stimulation, a game-changing product that will transform the way you approach well treatments. With our Thru-Tubing Acid Stimulation system, deployment has never been easier. Using electric wireline technology, our product offers quick and seamless deployment, saving you valuable time and resources. Whether you prefer HCL or HCL/HF acid blends, we have you covered with our versatile options. What sets our product apart is the utilization of a specially formulated solid acid stick, which can be delivered via slickline, wireline, coil tubing, or tractor conveyance. This solid acid stick releases heated acid vapor with pinpoint accuracy precisely at the zone of interest. The highly reactive nature of the vapor ensures increased penetration and contact with the formation, effectively targeting contaminants and carbonate scale. One of the key advantages of our Thru-Tubing Acid Stimulation is the complete vaporization and spending of the acid down-hole. This eliminates any contaminated effluent, greatly reducing the risk of spills at the surface and eliminating the need for post-treatment clean-up or disposal. Say goodbye to environmental concerns and hello to a greener, safer solution. The benefits of choosing our Thru-Tubing Acid Stimulation are numerous. Firstly, you'll contribute to reducing CO2 emissions, making a positive impact on the environment. Additionally, you'll experience reduced downtime, thanks to the simplicity and efficiency of our implementation process. The increased precision of our system ensures targeted results, allowing you to achieve your desired outcomes with accuracy and reliability. By choosing our product, you'll also enjoy fast-acting results, saving both time and money. Lower manpower, rig, and equipment costs are a reality with StimStixx Technologies. With our Thru-Tubing Acid Stimulation, you can say goodbye to surface spillage and the exposure to hazardous materials. We prioritize safety and efficiency, making your operations smoother and more secure. Join the ranks of industry leaders who have already experienced the benefits of Thru-Tubing Acid Stimulation by StimStixx Technologies. Don't miss out on this opportunity to revolutionize your well stimulation processes. Contact us today and witness the future of well treatments!

Buy

In Stock

Product & Service

New

API

Air Freight


Regular Duty Anchor for 1502 hammer union piping

1/2″ 12-Strand HMPE fiber

Introducing Safe-T-Whip RD Anchor (SW-A-RD-01): Your Anchor for Unmatched Safety and Reliability Safety is our top priority at Safe-T-Whip & Restraints Inc., and we are thrilled to present our latest innovation - the SW-A-RD-01 Safe-T-Whip RD Anchor. This indispensable anchor is designed to provide robust restraint for flowline installations in the oilfield, ensuring the utmost safety for your team and equipment, even in the most demanding conditions. Unparalleled Design and Performance: Identified by its bright yellow color and yellow tag, SW-A-RD-01 is made from 1/2" 12-Strand HMPE fiber, making it a Regular Duty (RD) anchor ideal for use on 2-inch 1502 hammer union pipelines up to 5000psi, 3-inch iron up to 3000psi, or 4-inch iron up to 2000psi. When your operations require an anchor connection for flowline restraint, it is crucial to use a designated Safe-T-Whip™ Anchor, ensuring maximum safety and reliability. Revolutionary Modulus Synthetic Fiber: Safe-T-WhipTM harnesses the power of high modulus polyethylene (HMPE), also known as ultrahigh molecular weight polyethylene (UHMWPE). This synthetic fiber is as strong as steel-wire ropes, yet significantly lighter, making it easy to handle, store, and transport. With its resistance to pressure hose and immunity to corrosion, oil spills, and most chemicals, our anchor ropes are specifically engineered to thrive in the extreme drilling and fracking conditions of the Canadian oil patch. Chemical Immersion and Temperature Resilience: SW-A-RD-01 demonstrates exceptional strength retention after 6-month immersion in various chemicals, including sea water, hydraulic fluid, gasoline, hydrochloric acid, and more. Additionally, it operates efficiently within a wide temperature range from -65°C to +65°C. Our anchor ropes are chemically inert, ensuring they stand the test of time and remain reliable under the harshest conditions. Your Economic and Comprehensive Solution: Purchasing a Safe-T-WhipTM system offers numerous advantages for multiple and long-term projects. Owning your safety restraint system gives you control over your job sites and projects without any delays, while also allowing you the flexibility to rent or purchase additional components as your needs change. The durability and ease of storage of our system ensure a long-lasting investment that will protect your workforce and hardware for years to come. Full Certified Training and In-house Financing: When you choose Safe-T-Whip & Restraints Inc., you not only acquire top-notch safety equipment but also receive a full certified Safe-T-Whip training program on installation, maintenance, and storage. Our experts are available to support your team throughout any project, ensuring smooth assembly and disassembly. Additionally, we offer in-house financing on all new projects, making it easier than ever to acquire your complete safety restraint system. Global Shipping Made Easy: Thanks to the lightweight nature of our system, we can provide direct and economical shipping throughout Canada and the world. Rest assured that your Safe-T-Whip RD Anchor will reach you swiftly and securely, ready to deliver unbeatable safety on your worksites. Protect Your Worksite with Safe-T-Whip: Invest in the SW-A-RD-01 Safe-T-Whip RD Anchor and safeguard your worksite, hardware, and workforce while ensuring full compliance with work safety regulations. Trust Safe-T-Whip & Restraints Inc. for the ultimate safety solutions in the oilfield industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Re-perforating

Revitalizing Wells with Precision: InWaTec Combined’s E-line Re-perforating Services In the lifecycle of an oil or gas well, the need to enhance production or manage reservoir depletion often leads to re-perforating—a strategic intervention aimed at revitalizing well performance. InWaTec Combined's E-line Re-perforating Services leverage the proven efficacy of wireline technology to refine and optimize this crucial process. Wireline, or electric line, has been the traditional mode for deploying perforating guns due to its substantial benefits. The real-time depth control ensures that each perforation is placed with surgical precision, while the selectivity afforded by wireline allows for targeted interventions, focusing on zones with the greatest potential for increased production. Moreover, the reduced logistics of wireline operations, as opposed to tubing deployment, offer a streamlined, cost-effective approach to well servicing. Historically, wireline perforating guns were differentiated based on their use—either as casing guns for pre-completion perforation or through-tubing guns for post-completion jobs. In today's industry, however, this distinction has been transcended. InWaTec Combined has embraced the versatility of wireline to deliver any engineered perforating system, regardless of the well's stage of life, alongside an extensive array of explosive devices. Our E-line Re-perforating Services are not merely about revisiting existing perforations. They represent a strategic re-evaluation and reconfiguration of the well's production strategy. Whether it's addressing areas of the reservoir that were initially bypassed, bypassing damaged perforations, or creating new pathways in depleted zones, our re-perforating services are tailored to meet the unique demands of each well. At InWaTec Combined, we understand that re-perforating is an opportunity to enhance well productivity significantly. Our expert teams, equipped with advanced diagnostic tools, evaluate the well's current status to identify the most promising zones for re-perforation. With this data, we employ the latest in shaped-charge technology and explosive devices, ensuring that new perforations deliver the maximum flow and recovery possible. Choosing InWaTec Combined's E-line Re-perforating Services means entrusting your well's performance to a company that values precision, efficiency, and innovation. Our commitment to excellence ensures that your re-perforating interventions are executed with the highest level of expertise, from planning to execution. Partner with us to revitalize your wells. With InWaTec Combined's E-line Re-perforating Services, you can expect to turn potential into production, optimizing your well's output and extending its productive life. Let us help you unlock the hidden value in your wells, one precise perforation at a time.

Service

In Stock

Service

New

API

Land Freight


GR-CCL

Streamlining Downhole Diagnostics: InWaTec Combined’s Integrated GR-CCL Services In the intricate world of well logging and evaluation, the ability to gather comprehensive data efficiently is a vital component of operational success. InWaTec Combined is proud to introduce our integrated Gamma Ray & Casing Collar Locator (GR-CCL) Services, a dual-function tool that synergizes gamma radiation measurement with precise casing collar detection. The GR-CCL is a testament to the power of combined diagnostics. It merges the functionality of a Gamma Ray tool, utilizing a Sodium Iodine Scintillation Detector, with the precision of a Casing Collar Locator. This powerful combination allows for the passive measurement of natural gamma radiation alongside the identification of changes in metal thickness, indicative of casing collars. Our GR-CCL Services empower operators with a two-fold diagnostic capability. The Gamma Ray aspect of the tool is essential for understanding the stratigraphy and identifying the presence of potentially productive zones. The Sodium Iodine Scintillation Detector is meticulously calibrated to capture the nuances of gamma radiation within the geological formations, providing a reliable indicator of downhole lithology. Simultaneously, the CCL component of the GR-CCL tool pinpoints the precise location of casing collars. This feature is crucial for depth correlation and ensuring that interventions such as perforating or sidetracking are executed at the correct depths. The ability to detect changes in metal thickness with high accuracy ensures that operators have a clear understanding of the casing's structural transitions. By integrating these two critical measurements, InWaTec Combined’s GR-CCL Services eliminate the need for multiple runs, saving time and reducing operational costs. The efficiency of this dual-action tool translates into faster decision-making and enhanced well intervention planning. InWaTec Combined’s commitment to innovation is embodied in our GR-CCL Services, where we provide more than just data—we offer a comprehensive solution that enhances the accuracy and efficiency of well logging operations. By deploying our GR-CCL tool, clients benefit from a streamlined approach to well diagnostics, bolstering their ability to make informed decisions with confidence. Choose InWaTec Combined’s GR-CCL Services for your well logging needs and embrace the clarity and precision that come with cutting-edge downhole diagnostic technology. Let our integrated solutions illuminate the path to optimized well performance and operational excellence.

Service

In Stock

Service

New

API

Land Freight


ATEX Group II, Battery

Battery for Wisdom Lamp 3A

Provix in New Lowell

More information

Power Your Work with the ATEX Group II Battery – A High-Performance Solution from Provix Provix is proud to present the ATEX Group II Battery (Part # NWI-WLAMP3A-ATEX), a powerful and reliable energy source designed specifically for use in challenging industrial environments. This battery is an ideal choice for professionals who require dependable and long-lasting power for their mining and construction equipment. Exceptional Performance and Durability The ATEX Group II Battery is engineered to deliver outstanding performance. With a capacity of 2*3.5=7.0Ah, it offers a strong and consistent power supply, ensuring your equipment operates at peak efficiency. The battery boasts an impressive 11000 LUX and 240 Lumens, providing bright and clear illumination for a variety of tasks. Extended Runtime for Demanding Workdays One of the key features of this battery is its extended runtime. Capable of running for 13 hours on a single charge, it is perfectly suited for long shifts and continuous use. This extended runtime ensures that your equipment stays operational throughout your workday, minimizing interruptions and maximizing productivity. Compliance with ATEX Safety Standards Safety is paramount in industrial settings, and the ATEX Group II Battery adheres to the highest safety standards. It is specifically designed for use in potentially explosive atmospheres, meeting the rigorous requirements of ATEX Group II certification. This compliance ensures that the battery can be safely used in hazardous environments commonly found in mining and construction sites. Robust Construction for Industrial Use Constructed with durability in mind, the ATEX Group II Battery is built to withstand the tough conditions of industrial work environments. Its robust design ensures it can endure the rigors of daily use, providing reliable performance over time. Ideal for Mining and Construction Professionals Whether you are working in mining, construction, or any other industry where reliable power is crucial, the ATEX Group II Battery is an essential tool. Its combination of high performance, extended runtime, and compliance with safety standards makes it a top choice for professionals. Invest in Reliable Power with Provix Upgrade your equipment with the ATEX Group II Battery from Provix. Visit our website at www.provix.net to learn more about this high-quality battery and explore our wide range of specialized mining and construction equipment. Power your work with the best – choose Provix.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Sand Trap

Flowback Tank with Sand Separaton

Introducing Sivam's Sand Trap: The Ultimate Solution for Sand Separation in the Oil and Gas Industry! Our innovative sand separation technology is designed to improve the efficiency and performance of oil and gas operations by effectively removing sand from production streams. Sivam's Sand Trap is a game-changer in the oil and gas industry. Our cutting-edge technology works by changing the flow parameters, reducing the flow velocities to the point where the sand drops out while gas and fluids are carried through. This process involves no bags, filters, screens, and virtually no pressure drop, making it the most efficient and cost-effective solution for sand separation on the market. Our Sand Trap is designed with durability and reliability in mind. It can handle high flow rates and is built to withstand harsh conditions, ensuring optimal performance even in the most challenging environments. And with no moving parts, it requires minimal maintenance, reducing downtime and operating costs. One of the key benefits of Sivam's Sand Trap is its versatility. It can be used in a variety of applications, from primary production to enhanced recovery, and can be customized to meet the specific needs of your operation. And with its compact design, it can be easily installed and integrated into your existing system. At Sivam, we pride ourselves on providing exceptional customer service and support. Our team of experts is always available to assist you with any questions or concerns you may have, ensuring that you get the most out of your Sand Trap. Overall, Sivam's Sand Trap is the ultimate solution for sand separation in the oil and gas industry. With its cutting-edge technology, versatility, and efficiency, you can trust that our Sand Trap will exceed your expectations. Contact us today to learn more about how Sivam's Sand Trap can benefit your business.

Rental

In Stock

Product & Service

New

ISO

Land Freight


Mesh Network Design and Installation

Pioneering Mesh Network Solutions for the Oil and Gas Industry: Nulux Leads the Way The oil and gas industry, characterized by its vast operations, challenging terrains, and the imperative for seamless communication, is a sector where reliable connectivity can make a profound difference. In this intricate web of operations, Mesh Network Design and Installation by Nulux Network Solutions emerges as the paramount solution for engineering professionals in the industry. Understanding Mesh Networks Unlike traditional Point-to-Point (P2P) or Multipoint configurations, mesh networks form a web of interconnected devices. Each node or device in this network is connected to multiple others, creating a network where information can take several paths to its destination. This interconnectedness ensures that even if one node fails, the network remains intact by rerouting data through other nodes, offering unparalleled reliability. Why Mesh Networks are a Game Changer for Oil and Gas Operations Robust Connectivity: Given the sprawling nature of oil and gas facilities, with sites spread across large geographic areas and often in remote locations, a mesh network ensures that there's no single point of failure. This robustness is crucial for operations where downtime can result in significant financial and operational setbacks. Scalability: As operations expand or evolve, mesh networks can be effortlessly scaled. With every new device acting as a node, the network becomes more resilient and extensive. Efficient Data Flow: With the capability to choose the quickest route for data transmission, mesh networks optimize the flow of information, ensuring timely decision-making and operational efficiency. Nulux's Expertise: Meshing Excellence with Experience Having an extensive background in various wireless infrastructures, Nulux Network Solutions has channeled its expertise into creating mesh network solutions that cater specifically to the challenges faced by the oil and gas industry. Customized Solutions: Recognizing that each operation is unique, our team tailors mesh network designs to align with the specific needs and challenges of each facility. End-to-End Service: From the initial design phase to the final installation, Nulux ensures that every aspect of the mesh network is handled with precision, ensuring optimal performance. Future-Ready: In an industry that's rapidly embracing digitization and smart technologies, our mesh networks are designed to be future-ready, compatible with emerging tech and capable of integrating with IoT devices and sensors. Driving Operational Efficiency with Wireless Solutions Beyond mesh networks, Nulux is committed to offering a comprehensive suite of wireless solutions. From designing Wireless Access Points (WiFi) that cater to bustling work environments to implementing secure and cost-effective Point-to-Point (P2P) networks, Nulux remains at the forefront of wireless tech, ensuring that the oil and gas sector is always one step ahead in its communication game. Conclusion In a sector where operational efficiency, safety, and timely decision-making are paramount, having a reliable communication network is non-negotiable. Nulux Network Solutions, with its cutting-edge Mesh Network Design and Installation services, offers the oil and gas industry a chance to revolutionize its communication infrastructure. Connect with us and let's chart a path to seamless connectivity together.

Service

In Stock

Service

New

ISO


Offshore Slickline Unit

Revolutionizing Offshore Operations: The Pinnacle of Slickline Services by InWaTec Combined In the dynamic world of oil and gas extraction, offshore platforms are the frontiers of human engineering prowess, and InWaTec Combined stands as a beacon of innovation in well intervention services. Our Offshore Slickline Unit represents the cutting-edge culmination of technology and expertise, designed to ensure the seamless operation of your offshore wells. The Essence of Slickline Operations At the heart of our service is the slickline operation, a critical aspect of well maintenance and testing. Utilizing a single strand wire, known for its robustness and simplicity, our operators skillfully navigate downhole tools through the wellbore's demanding environment. From bailers to pulling tools, stems to running tools, our slickline is the lifeline that facilitates precise interventions within oil and gas wells. Versatility at Depth Slickline's single strand wire is more than just a cable; it's a versatile tool in its own right. Whether it's deploying valves, installing plugs, or adjusting pressure regulators, slickline operations by InWaTec Combined can handle a multitude of tasks with finesse. Our operators are trained to execute complex retrievals and installations, ensuring that your well's performance is optimized at all times. Tailored for the Offshore Challenge Understanding the unique challenges of offshore operations, our services are tailored to meet the demands of Mobile Offshore Drilling Units (MODUs), Light Intervention Vessels (LIVs), and stationary offshore platforms. Our slickline units are engineered to withstand the harshest marine conditions, delivering reliable performance where it matters most. A Commitment to Excellence InWaTec Combined's Offshore Slickline Unit services are underpinned by our unwavering commitment to excellence. We are not just service providers; we are partners in your quest for operational efficiency and resource maximization. With our slickline services, we promise not just to meet but to exceed the high standards of the oil and gas industry’s offshore sector. In conclusion, InWaTec Combined is not just facilitating well interventions; we are redefining them. Our Offshore Slickline Unit services are a testament to our dedication to excellence and our unrelenting pursuit of technological advancement. Let us take your offshore operations to new depths of success.

Service

In Stock

Service

New

API

Land Freight


Woodworking equipment Leasing

Elevate Your Craft with Woodworking Equipment Leasing from CWB National Leasing Transforming Your Woodworking Projects with Flexible and Efficient Equipment Solutions For businesses in the woodworking industry, from small workshops to large manufacturing plants, having access to high-quality woodworking equipment is crucial for productivity and craftsmanship. Leasing woodworking equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution to enhance your woodworking capabilities. Here’s how leasing woodworking equipment can benefit your business: 1. Swift Access to Advanced Equipment CWB National Leasing prioritizes your need for efficient operations. They offer a rapid leasing process, typically approving applications and notifying your equipment dealer about payment within 48 hours. This quick turnaround ensures that your woodworking equipment can be delivered and operational swiftly, minimizing any disruption to your projects. 2. Enhanced Financial Power Leasing woodworking equipment with CWB National Leasing increases your buying power. It allows you to spread costs over periodic payments rather than making a large upfront investment, freeing up capital for other areas of your business. Additionally, the option to add extra features or accessories to your equipment for a small payment increase allows for customization to meet your specific production needs. 3. Effective Cash Flow Management Smaller lease payments over the term mean your woodworking equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, which is essential for the financial health and growth of your business. 4. Flexible Payment Structures CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments are manageable and aligned with your financial situation. 5. Potential Tax Benefits Leasing woodworking equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can optimize your business’s tax position. Conclusion Opting to lease woodworking equipment through CWB National Leasing is a strategic decision that equips your business with essential tools while maintaining financial flexibility. It ensures access to state-of-the-art equipment, vital for producing high-quality wood products, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, increased production capacity, and greater profitability, helping your woodworking business to thrive in a competitive market.

Service

In Stock

Service

New

ISO


Shear Down Pulling Tools for External Fishing Necks

Downhole Tools

Optimize Your Downhole Retrieval Operations with HOCA Oil Tools' Shear Down External Fishing Neck Pulling Tools In the intricate world of oilfield operations, ensuring seamless downhole tool retrieval is pivotal for maintaining efficiency and minimizing downtime. HOCA Oil Tools, a specialist in crafting superior downhole slick line tools, proudly presents its Shear Down External Fishing Neck Pulling Tools. These tools are engineered with precision to facilitate the secure and efficient retrieval of subsurface equipment, enhancing operational effectiveness and safety. HOCA’s Shear Down External Fishing Neck Pulling Tools: Precision Engineered for Enhanced Retrieval Our Shear Down External Fishing Neck Pulling Tools are designed for operators who demand reliability and precision in their downhole activities. Built to engage and retrieve subsurface equipment with external fishing necks, these tools are essential for operations requiring the removal of downhole instruments. Equipped with a shear-down mechanism, these pulling tools allow for disengagement in scenarios where the retrieved equipment becomes immovably stuck, thereby ensuring the safety and continuity of operations. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with downhole solutions that meet the demands of modern well operations. Our Shear Down External Fishing Neck Pulling Tools represent our commitment to innovation, quality, and customer satisfaction. Whether you are addressing routine retrieval tasks or facing complex downhole challenges, our tools are designed to enhance the efficiency, safety, and success of your operations. By incorporating our Shear Down External Fishing Neck Pulling Tools into your downhole toolkit, you are choosing a product that delivers on the promise of operational excellence. With HOCA Oil Tools, you gain not just a supplier, but a partner committed to supporting your success with state-of-the-art solutions and expert service. Choose HOCA Oil Tools for your downhole needs and take the first step towards more efficient, safe, and cost-effective retrieval operations. Elevate your downhole performance with HOCA Oil Tools – where innovation, quality, and reliability come together to drive your success.

Buy

In Stock

Product & Service

New

API

Air Freight


Casing Inspection

Safeguarding Well Integrity with InWaTec Combined’s Advanced E-Line Casing Inspection Services At InWaTec Combined, we understand that maintaining the structural integrity of well casings is paramount to the uninterrupted production and long-term viability of any well. That’s why we are committed to offering comprehensive E-Line Casing Inspection Services, employing an array of sophisticated diagnostic techniques to detect and prevent casing failures before they compromise well operations. Casing failures can arise from a variety of factors, including deformation, physical wear, and corrosion. These issues, if not identified and addressed promptly, can lead to diminished well production or catastrophic failures. Recognizing the critical nature of this aspect of well maintenance, InWaTec Combined utilizes four industry-standard techniques for casing inspection, each offering unique insights into the condition of the wellbore structure: Cased-Hole Calipers: Our E-Line delivered cased-hole calipers provide precise measurements of the internal dimensions of the casing, identifying areas of deformation and wear that may not be immediately apparent. Flux-Leakage Tools: These tools detect flaws in the casing by identifying areas where magnetic flux leakage occurs, indicative of potential corrosion or metal loss. Electromagnetic Phase-Shift Tools: By measuring variations in electromagnetic fields, these tools can pinpoint defects within the casing structure, offering an early warning against integrity breaches. Ultrasonic Tools: Our ultrasonic inspection tools use high-frequency sound waves to assess the thickness of casing walls, detecting thinning that could lead to potential collapse. In addition to these methods, InWaTec Combined also employs ultrasonic radial-cement-evaluation devices and modified openhole-imaging devices. These specialized tools are invaluable in evaluating the casing for signs of internal or external metal loss—a critical step in preventing unexpected downtime and ensuring the integrity of the well. Our E-Line Casing Inspection Services are about more than just diagnostics; they provide a strategic approach to well maintenance. By utilizing these advanced tools, we offer a detailed assessment of the casing's condition, enabling operators to take preemptive action to rectify issues before they escalate into more significant problems. In choosing InWaTec Combined for your casing inspection needs, you are selecting a partner dedicated to the highest standards of well integrity and operational safety. We provide a comprehensive, E-Line delivered, diagnostic service that ensures your well remains productive, safe, and profitable for years to come. Trust in the precision of our technology and the expertise of our team to maintain the backbone of your well operations—because at InWaTec Combined, we believe that prevention is the key to sustainable production.

Service

In Stock

Service

New

API

Land Freight


Flow Release Overshot for Coiled Tubing

FRO Coiled Tubing Tool

Introducing the FRO (Flow Release Overshot) from Marlin Oil Tools: Your Ultimate Solution for Efficient Fishing Operations in Oil and Gas Well Interventions Marlin Oil Tools is proud to present the FRO (Flow Release Overshot), a sophisticated downhole tool specifically designed to revolutionize fishing operations during well intervention. The FRO is engineered to offer unparalleled efficiency and reliability in capturing and retrieving objects ("fish") from the wellbore, ensuring smooth and successful operations. With its replaceable collet and adaptable design, the FRO is a must-have tool for any well intervention toolkit. Key Features of the FRO (Flow Release Overshot): Versatile Collet Design: The FRO features a replaceable collet system designed to catch and secure a smooth surface of fish, accommodating a wide range of outer diameters from 1.0” to 2-1/8”. Customizable Bottom Guide: Upon client request, the bottom of the overshot can be equipped with a guide leap, enhancing its ability to guide and catch fish with precision. Secure Fish Retrieval: The collet of the FRO overshot securely grips the fish, holding it firmly during the lifting process out of the well, ensuring safe and efficient retrieval. Pressure-Release Mechanism: In situations where the captured object cannot be released from the well, the FRO allows for an easy disengagement by applying pressure through the coil tubing, offering an additional layer of operational safety. SEO Optimized Description for Marlin Oil Tools’ FRO: Elevate your well intervention and fishing operations with the FRO (Flow Release Overshot) from Marlin Oil Tools, a leading downhole tool engineered for maximum retrieval efficiency in the oil and gas industry. Featuring a replaceable collet for capturing a range of fish sizes and an optional guide leap for enhanced precision, the FRO ensures secure and successful fish recovery. With its unique pressure-release mechanism, the FRO offers an innovative solution for challenging fishing scenarios, making it an essential component of your well intervention arsenal. Choose the FRO for reliable, efficient, and safe fishing operations. Why Choose the FRO from Marlin Oil Tools? Adaptable to Various Fish Sizes: Designed to accommodate a broad range of fish diameters, ensuring versatility across operations. Enhanced Precision and Safety: Optional guide leap improves catch accuracy, while the secure grip minimizes risks during retrieval. Innovative Release Mechanism: Provides a reliable method for disengaging from stubborn fish, enhancing operational flexibility. Durability and Reliability: Constructed to withstand the harsh conditions of downhole environments, ensuring consistent performance. The FRO (Flow Release Overshot) by Marlin Oil Tools represents the forefront of innovation in well intervention fishing operations. Incorporate the FRO into your operations to achieve optimal outcomes in fish retrieval, backed by the reliability and efficiency Marlin Oil Tools is known for.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Sustainability Consulting

Consulting

Eleks in Toronto

More information

Elevate Your Business Towards Sustainability: Unleash Growth and Green Opportunities with ELEKS Sustainability Consulting In a world where sustainability is no longer an option but a necessity, ELEKS Sustainability Consulting emerges as your guiding light towards net-zero carbon emissions and environmentally-conscious growth. With a holistic approach encompassing consulting, implementation, and scaling, we offer an all-encompassing solution to drive sustainability while propelling your business forward. Paving the Way to Sustainability Success: Facilitate Sustainability Initiatives: Whether you're working towards net-zero carbon strategies or seeking to reduce your carbon footprint, our sustainability consulting services provide expert guidance. Our seasoned industry experts specialize in automating and optimizing processes for CO2 emission reduction. We'll guide you through end-to-end sustainability activities and empower your in-house team with environmental expertise. Optimize Project Costs and Timelines: Our comprehensive green consulting service ensures a cost-effective sustainability strategy. With three decades of software development experience and a network of cross-industry experts, we'll ensure your sustainability project aligns with your goals, budget, and timelines. Ensure Compliance and Avoid Penalties: As global sustainability frameworks become more comprehensive, compliance is critical. Our consultants help you navigate the complex landscape, ensuring transparency across your value chain and meeting GHG reporting frameworks and climate change legislation. Make Informed Investment Decisions: Our sustainability experts conduct thorough market research, empowering you to prioritize sustainable solutions. With a high-level roadmap and comprehensive data, you'll be equipped to make strategic decisions that drive sustainability and growth. Drive Sales and Foster Customer Loyalty: Elevate your brand by placing sustainability at its core. Our consulting services, backed by software development and digital transformation expertise, create a customer experience that resonates. This approach expands your client base, boosts customer retention, and fosters loyalty. Expand into New Markets: With sustainability as a focal point, explore new opportunities and markets. We analyze your objectives, research extensively, and help design services that resonate with your target markets, adding tangible business value. Unlocking Sustainability Potential - What's Included: Advisory on GHG Management: Our sustainability platform empowers you with consultancy on GHG accounting, reduction, and removal. Achieve transparency, traceability, and efficiency on your journey to net-zero. Our ready-to-use IT solution for carbon management is customizable to your needs. Technology Market Research: Navigate existing sustainability solutions from a business and technology perspective. Identify solutions that seamlessly enhance your market offerings and operations. Sustainability-Led Opportunity Scoping: Uncover new business opportunities and revenue streams by aligning the latest technologies and market trends with your expertise. A Journey Guided by Expertise: Conducting Initial Research: We dive deep into comprehensive market research, surveys, and interviews with stakeholders to understand your organization's challenges, needs, and goals. Defining Opportunity Areas: Based on your priorities, we define focused opportunity areas that promise the best returns, ensuring optimal investment in green business goals. Developing Business Cases: We create high-level business cases considering desirability, feasibility, and viability. These cases serve as a foundation for your sustainability journey. Crafting Architecture Vision: Once business cases are approved, our software experts identify tech stacks and components that align with your requirements, ensuring efficient execution. Presenting Outcomes: Our consulting culminates in a detailed report, offering a holistic description of business opportunities, technology areas, prioritization, implementation roadmaps, and budget proposals for your sustainability strategy. Our Focus Areas: • GHG Emissions Accounting, Reduction, and Removal • Transparency and Traceability • Waste Management • Circular Economy • Energy Transition • Life Cycle Assessment (LCA) Why Choose ELEKS Sustainability Consulting? End-to-End Sustainability Consulting: With over 30 years of software development and domain expertise, ELEKS Sustainability Consulting provides a comprehensive solution for all your strategic sustainability needs. Science-Based Approach: Our partnerships with universities and research institutions ensure evidence-based results. We engage niche specialists for reliable, data-driven sustainability outcomes. Robust Technological Capabilities: We integrate consulting outcomes seamlessly into your ecosystem and offer white-label solutions, minimizing additional investment in internal projects. Elevate Sustainability with ELEKS: ELEKS Sustainability Consulting is more than a service; it's a transformative journey that merges sustainability with growth. Join us as we navigate towards a sustainable future, where your business thrives while fostering a healthier planet.

Service

Made to Order

Service

New

ISO


Flare Gas Capture

Gas Recovery Equipment

Unlock Value from Flare Gas with Lovat Gas Solutions Flare gas, often associated with oil production, holds tremendous potential for conservation and revenue generation. At Lovat Gas Solutions, we specialize in flare gas capture and can help your company devise a comprehensive plan to conserve this valuable resource and turn it into a source of revenue. In many jurisdictions, energy regulators require producers to conserve associated gas to enable oil production. If your company has oil wells or fields that are shut in due to excess gas production, we are here to assist you. Our team of experts will work closely with you to develop a conservation and revenue plan that aligns with your company's objectives. Why choose Lovat Gas Solutions for your flare gas capture needs? 1. Expertise in Flare Gas Capture: Our team possesses deep expertise and knowledge in flare gas capture. We understand the unique challenges associated with capturing and monetizing this resource. With our experience and technical know-how, we can help you devise an effective plan to conserve flare gas and unlock its value. 2. Compliance with Energy Regulations: We stay up-to-date with the latest regulations and requirements set forth by energy regulators. Our solutions are designed to help you meet regulatory obligations while optimizing the use of flare gas to enhance your operations and revenue streams. 3. Conservation and Revenue Generation: Lovat Gas Solutions is dedicated to helping you turn flare gas into a valuable asset. By capturing and conserving flare gas, we can develop a plan that not only helps you meet regulatory standards but also generates revenue for your company. 4. Tailored Solutions: We recognize that every oil well or field is unique, and so are the requirements for flare gas capture. Our team will work closely with you to understand your specific circumstances and develop a customized plan that maximizes the potential of your flare gas while aligning with your business goals. By partnering with Lovat Gas Solutions, you can: • Conserve valuable resources by capturing flare gas • Comply with energy regulations and demonstrate environmental responsibility • Generate additional revenue streams from previously wasted gas • Enhance the sustainability and profitability of your operations Contact us today to discuss your flare gas capture needs. Our team of experts is ready to collaborate with you to devise a conservation and revenue plan that suits your company's requirements. With Lovat Gas Solutions as your trusted partner, you can unlock the full potential of flare gas and maximize the value of your operations.

Service

Made to Order

Product & Service

New

ASME

Land Freight


Remote Operated Vehicle (ROV) Training Courses

ROV Training

Dive into the Depths: Poseidon Robotics Introduces Subsea ROV Training Courses At Poseidon Robotics, we believe that the true potential of subsea exploration lies in the hands of skilled professionals. That's why we are excited to announce our comprehensive Subsea ROV Training Courses, designed to equip aspiring ROV operators and seasoned professionals alike with the knowledge and expertise needed to master the art of underwater robotics. Unleash Your Subsea Potential Subsea robotics and Remote Operated Vehicles (ROVs) are revolutionizing the way we explore and interact with the underwater world. Our ROV training courses are crafted to empower individuals with the skills required to navigate ROVs with precision and confidence, ensuring safe and efficient operations beneath the waves. Experience and Expertise At Poseidon Robotics, we take pride in our team of experienced instructors who bring a wealth of knowledge from years of practical ROV operation and subsea exploration. Our instructors have worked on diverse projects worldwide, ranging from offshore oil and gas installations to scientific research and environmental surveys. Comprehensive Curriculum Our Subsea ROV Training Courses cover a wide range of topics, catering to both beginners and advanced learners. From the fundamentals of ROV piloting and navigation to advanced techniques, troubleshooting, and maintenance, our courses leave no stone unturned in providing a well-rounded education in subsea robotics. Hands-On Learning We understand that practical experience is the key to mastering ROV operations. That's why our training courses feature hands-on learning opportunities with our cutting-edge ROV systems. Participants get to operate ROVs in simulated real-world scenarios, honing their skills under the guidance of our seasoned instructors. Tailored to Your Needs Whether you are an individual looking to kickstart your career in subsea robotics or a company seeking to train your ROV operators, our courses can be tailored to meet your specific needs. We offer both individual and group training options, ensuring that you get the most out of your learning experience. A Gateway to New Opportunities Completing our Subsea ROV Training Courses opens the door to exciting career opportunities in the subsea industry. As the demand for skilled ROV operators continues to grow, our certified graduates are well-prepared to embark on rewarding careers in offshore exploration, marine research, salvage operations, and more. Join the Poseidon Robotics Academy Are you ready to dive into the depths of subsea robotics and ROV operations? Join the Poseidon Robotics Academy and unlock the potential of underwater exploration. Our Subsea ROV Training Courses provide the knowledge, skills, and confidence you need to excel in the world of subsea robotics. Invest in Your Future Invest in your future and become a part of the cutting-edge subsea robotics industry. Contact Poseidon Robotics today to learn more about our Subsea ROV Training Courses and take the first step toward a fulfilling and adventurous career beneath the waves. The subsea world awaits your exploration!

Service

In Stock

Service

New

ASME

Air Freight


Boost operational efficiency with automation

Software Development

Eleks in Toronto

More information

Transforming Efficiency: Elevate Your Operations with ELEKS Experience a new level of operational efficiency with ELEKS' custom software development and data science services. Our cutting-edge solutions empower utility companies to embrace intelligent automation, optimizing complex processes and workflows across logistics, inventory management, warehousing, production planning, billing, and consumer management. With ELEKS as your partner, you can streamline your operations, achieve peak efficiency, and realize substantial cost savings. Empower Your Operations with ELEKS Energy Software Development: Embrace an advanced energy management software solution that revolutionizes productivity, accessibility, safety, and sustainability within your business power system. Intelligent Automation Expertise: Our custom software development and data science services enable you to adopt intelligent automation for critical processes. Say goodbye to repetitive, labor-intensive tasks and hello to efficiency and accuracy. Real-Time Insights: Gain real-time data on your operational conditions. Our solutions provide you with up-to-the-minute insights that help you make informed decisions and stay ahead of challenges. Minimize Errors and Costs: Automation minimizes human errors, reducing the risk of costly mistakes in critical processes. Achieve cost savings by optimizing workflows and minimizing resource wastage. Why Choose ELEKS? Proven Excellence: ELEKS boasts a 30-year legacy of excellence in custom software development. Our solutions are tried, tested, and trusted by energy producers, distributors, and governmental organizations. Cutting-Edge Innovation: Stay ahead of the curve with our utilization of cutting-edge technologies, including Cloud, IoT, blockchain, and data-driven solutions. Our software development team is equipped to address the evolving needs of the energy and utility industry. Tailored to Your Needs: Our solutions are tailored to your specific requirements, ensuring that you receive a technology platform that seamlessly integrates into your existing workflows. Revolutionize Your Operations: Join the ranks of industry leaders who are revolutionizing their operations through intelligent automation. With ELEKS as your partner, you can optimize processes, enhance accuracy, and unlock significant cost savings. Lead the Change with ELEKS ELEKS' custom software development and data science services empower utility companies to take charge of their operations, embracing automation for lasting efficiency gains. Say goodbye to manual, error-prone processes and hello to streamlined workflows and real-time insights. Take your operations to the next level – choose ELEKS as your partner in transformation.

Service

Made to Order

Service

New

ISO